Comelit 3110/3A Flush-Mounted Box 3 Modules
Overview
The Comelit 3110/3A is a wall-mounted flush enclosure designed to integrate into modular intercom and access control systems. The 3-module capacity allows flexible endpoint configuration — you can populate it with audio, video, or control modules depending on your access point requirements. Dimensions of 125.5 × 317.5 × 55 mm (W × H × D) fit standard wall cavities without deep recesses, making it practical for retrofits in corridors, building entries, and tenant access points where surface-mounted equipment is not acceptable.
Compatibility
The 3110/3A integrates with the Comelit modular system architecture. Install it wherever your Comelit intercom or access control topology requires a compact 3-module endpoint — residential buildings, office access points, and light commercial facility entrances are typical placements. Confirm your specific module selections (audio, video, control variants) with your Comelit system design before ordering; the enclosure itself is passive and accommodates any compatible 3-module stack.
Environmental & Durability
IP65 weatherproof rating protects against dust and low-pressure water jets — suitable for sheltered outdoor use and indoor variable environments. IK08 vandal resistance (50 joules impact energy) handles incidental physical contact but is not rated for sustained assault. Do not deploy in fully exposed outdoor locations (rain from multiple angles) or harsh salt-spray environments without additional weatherproofing measures. Operating temperature range is standard indoor/protected outdoor (-10°C to +55°C typical for modular enclosures of this class, though this specific range is not detailed in available evidence).
Installation Notes
Flush mounting requires a wall cavity or recessed frame compatible with the 125.5 mm width. Secure the enclosure using the provided or field-sourced fasteners (specific torque and hardware not specified in evidence). Ensure adequate strain relief for internal module wiring; tight cable management prevents pinch damage during closure. Verify wall material load capacity if mounting on plasterboard or lightweight partitions.
