IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Hikvision

SKU: AB110

Hikvision AB110 Angled Base for Dome Camera

15° angled dome base for better overhead coverage without motors
- 15° fixed downward tilt eliminates blind spots in retail and hallway setups
- Supports up to 2 kg (4.41 lbs) for compact and mid-size dome cameras
- Weighs only 0.44 lbs—minimal load for ceiling or wall mounting
In stock · Ships same business day

$17.00 $12.99 Save $4.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-CW7SN

i-PRO WV-CW7SN Smoked Dome Cover with ClearSight Anti-Reflective Coating

Smoked dome cover with anti-reflective coating for bright indoor spaces
- Smoked polycarbonate reduces glare and reflection without compromising image clarity
- ClearSight multi-layer anti-reflective coating suppresses dome-air interface reflections
- Field-replaceable design fits select i-PRO dome camera models
In stock · Ships same business day

$145.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5503-431

Axis 5503-431 IP66 Network Cable Coupler

IP66 weather-sealed RJ-45 coupler for outdoor cable extension
- Tool-free quick-connect—no crimper or punch-down tools needed
- IP66 rated for dust and high-pressure water jets in outdoor runs
- Corrosion and UV-resistant housing with gold-plated contacts
In stock · Ships same business day

$34.01 $32.99 Save $1.02

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5503-741

Axis Gasket A 3.5mm Cable Seal 10-Pack

IP65 gasket seals for 3.5mm Axis cables, 10-pack tool-free install
- Moisture and dust protection for outdoor surveillance cable connections
- Tool-free installation with no downtime across 10 gaskets per pack
- IP65-rated sealing compatible with Axis 3.5mm camera and accessory cables
Special Order · Ships in 2-3 weeks

$34.01 $32.99 Save $1.02

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5017-111

Axis T91A11 Plastic Mounting Stand White - 5017-111

Plastic pedestal stand for AXIS M10X/M11X cameras, tool-free setup
- Tripod-mount interface fits M10X and M11X series cameras without tools
- White plastic construction, lightweight at 0.15 lb, blends office environments
- Adjustable positioning allows angle testing before permanent wall or ceiling mount
In stock · Ships same business day

$17.52 $16.99 Save $0.53

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01467-001

Axis T91A33 Lighting Track Mount White 4-Pack - 01467-001

4-pack track mounts for supplemental lighting with Axis cameras
- Mounts to universal 3-circuit lighting track systems without rewiring
- Four mounts per kit for multi-camera or concentrated deployment options
- White finish integrates with modern ceiling infrastructure and trunking
In stock · Ships same business day

$103.08 $99.99 Save $3.09

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02567-001

Axis TQ1003-E Outdoor Box Camera Wall Mount - 02567-001

Adjustable wall mount for Axis box cameras with outdoor durability
- Pan, tilt, and rotation adjustability for post-installation angle tuning
- Weatherproof construction with corrosion-resistant materials and IK10 rating
- Integrated cable channels and strain relief prevent water ingress and chafing
In stock · Ships same business day

$69.06 $66.99 Save $2.07

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300HMW7

Hanwha SBP-300HMW7 Hanging Mount, White

Lightweight aluminum ceiling mount, 145g, -50°C to +60°C
- 145g aluminum construction reduces ceiling load for multi-camera deployments
- PF 1 1/2" male thread compatible with standard wall and ceiling adapters
- Operates across -50°C to +60°C and 0–100% humidity without drift
In stock · Ships same business day

$49.99

Add to Cart
The item has been added
Compare

Out of stock
Hikvision

SKU: WM-FE

Hikvision WM-FE Wall Mount for IP Cameras

Wall mount for Hikvision IP cameras with 360° swivel and 75° tilt
- Fits Hikvision dome, turret, and bullet cameras up to 5 kg capacity
- 360° swivel and 0–75° tilt range for complete directional positioning
- Aluminum alloy construction rated for indoor and outdoor environments
Special Order · Ships in 2-3 weeks

$115.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR506-W

i-PRO WV-QSR506-W 4-Screw Mount Bracket

4-screw ceiling/wall mount bracket for i-PRO fixed camera installations
- Four-point fastening distributes load evenly to prevent frame drift
- White powder-coat finish blends into standard office and retail ceilings
- Compatible with i-PRO screw-mount camera platforms; installs with standard tools
In stock · Ships same business day

$85.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02398-001

Axis 02398-001 Clear Dome Cover

IP66 clear dome cover for Axis cameras, -40°C to 50°C outdoor use
- Hard-coated polycarbonate resists UV degradation and mineral buildup
- IP66 dust-tight and high-pressure water-jet resistant sealing
- 205×150mm form factor fits standard Axis surveillance camera housings
In stock · Ships same business day

$195.87 $189.99 Save $5.88

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5506-611

Axis T91B21 Aluminum Tripod Mount Stand - 5506-611

Corrosion-resistant aluminum stand with integrated cable routing
- Standard 1/4-inch tripod thread fits Axis M11, P13, Q16 series
- Aluminum construction resists corrosion in outdoor and coastal environments
- Cable hole with snap-on cover routes wiring and hides fasteners
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02587-001

Axis TM2802 M20 Camera Front Kit A - 02587-001

Protective front kit for Axis M2035-LE and M2036-LE cameras
- Polycarbonate window assembly with IR filter and gaskets seal against environmental elements
- Black cover ring adds professional appearance while protecting lens from damage
- User-friendly installation with minimal downtime to your surveillance system
Special Order · Ships in 2-3 weeks

$34.01 $32.99 Save $1.02

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02250-001

Axis TU6004-E 8 m Modular Camera Cable - 02250-001

8m cable for Axis F-series modular cameras, IP66-67 rated
- 8 meter (26 ft) length supports flexible indoor/outdoor placement
- IP66-67 and IP6K9K rated for harsh weather and high-pressure wash
- Compatible with F21, F72, and F41 sensor units; 40mm bending radius
Special Order · Ships in 2-3 weeks

$31.95 $30.99 Save $0.96

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-120WMW

Hanwha SBP-120WMW Indoor Wall Mount, White

Lightweight wall mount for Hanwha compact indoor cameras, -50°C to 60°C
- 175g plastic construction installs without reinforced anchors yet holds aim stable
- Operates 0–100% humidity in uncontrolled spaces—data centers, warehouses, vestibules
- White finish blends into ceilings and drywall without visual clutter in offices
In stock · Ships same business day

$25.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-156WMW

Hanwha SBP-156WMW Wall and Pole Mount

Wall and pole mount for Hanwha PTZ and IP cameras, aluminum white finish
- Dual-configuration bracket mounts to flat walls or round poles without swapping hardware
- Aluminum construction with white powder coat resists corrosion in outdoor environments
- Compatible with Hanwha Wisenet PTZ Plus and standard IP surveillance cameras
In stock · Ships same business day

$149.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Hikvision AB110 Angled Base for Dome Camera

i-PRO WV-CW7SN Smoked Dome Cover with ClearSight Anti-Reflective Coating

Axis 5503-431 IP66 Network Cable Coupler

Axis Gasket A 3.5mm Cable Seal 10-Pack

Axis T91A11 Plastic Mounting Stand White - 5017-111

Axis T91A33 Lighting Track Mount White 4-Pack - 01467-001

Axis TQ1003-E Outdoor Box Camera Wall Mount - 02567-001

Hanwha SBP-300HMW7 Hanging Mount, White

Hikvision WM-FE Wall Mount for IP Cameras

i-PRO WV-QSR506-W 4-Screw Mount Bracket

Axis 02398-001 Clear Dome Cover

Axis T91B21 Aluminum Tripod Mount Stand - 5506-611

Axis TM2802 M20 Camera Front Kit A - 02587-001

Axis TU6004-E 8 m Modular Camera Cable - 02250-001

Hanwha SBP-120WMW Indoor Wall Mount, White

Hanwha SBP-156WMW Wall and Pole Mount

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading