Sub categories

Showing Results for Accessories

Compare

Out of stock
ACTi

SKU: ACS-ICB-ADU-BOSCH-PB-NDE5704AL

ACTi Interior Fixed Dome Active - ACS-ICB-ADU-BOSCH-PB-NDE5704AL
- Bridges Bosch NDE5704AL modules into ACTi ceiling dome housings without custom fabrication.
- Includes mechanical bracket, alignment collar, and electrical connector for reliable integration.
- Standardizes Bosch optics deployments within ACTi interior dome infrastructure on ceiling mounts.
$2,640.00 $1,641.99 Save $998.01

Add to Cart
The item has been added
Free shipping over $499

$2,640.00 $1,641.99 Save $998.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: ACS-ICB-ADU-BOSCH-PB-NDE8513RX

ACTi Interior Fixed Dome Active - ACS-ICB-ADU-BOSCH-PB-NDE8513RX
- Integrates Bosch NDE8513RX hardware into ONVIF-compliant VMS without custom fabrication.
- Supports ceiling and wall mounting using standard M4 fasteners and CAT5e or better cabling.
- PoE-powered via existing Ethernet infrastructure — no additional drivers or firmware required.
$3,160.00 $1,964.99 Save $1,195.01

Add to Cart
The item has been added
Free shipping over $499

$3,160.00 $1,964.99 Save $1,195.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: ACS-ICB-ADU-BOSCH-PB-NDM7703AL

ACTi Interior Fixed Dome Active - ACS-ICB-ADU-BOSCH-PB-NDM7703AL
- Integrates Bosch cameras into ACTi VMS/NVR platforms without replacing existing hardware.
- Supports ceiling and wall mounting for flexible interior dome placement.
- Enables multi-vendor standardization on a single management platform across facilities.
$4,320.00 $2,685.99 Save $1,634.01

Add to Cart
The item has been added
Free shipping over $499

$4,320.00 $2,685.99 Save $1,634.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: ACS-ICB-ADU-BOSCH-PB-NDS57436L

ACTi Interior Fixed Dome Active - ACS-ICB-ADU-BOSCH-PB-NDS57436L
- Mounts Bosch camera modules into ACTi interior dome housings without custom fabrication.
- Supports ceiling and wall installation using standard substrate fasteners for flexibility.
- Dome form factor suits aesthetic or operationally constrained interior deployments.
$2,560.00 $1,591.99 Save $968.01

Add to Cart
The item has been added
Free shipping over $499

$2,560.00 $1,591.99 Save $968.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: ICB-ADU

ACTi Interior Fixed Dome Active Deterrent SYS - ICB-ADU
- ONVIF-compatible streaming integrates with major VMS platforms without custom config.
- H.265/H.264 dual-codec encoding reduces storage and bandwidth overhead per channel.
- PoE powering eliminates separate power runs, keeping each camera drop to a single cable.
$1,325.00 $1,212.99 Save $112.01

Add to Cart
The item has been added
Free shipping over $499

$1,325.00 $1,212.99 Save $112.01

Add to quote Compare
Compare

Add to Cart The item has been added
ACTi

SKU: EPR8A70070-000

ACTi Iteachspider Motorized Mobile Stand (no - EPR8A70070-000
- Supports flat-panel displays up to 250 lbs with motorized electric height adjustment.
- Mobile stand form factor enables rapid display repositioning across shifts or rooms.
- No-tool basic operation reduces deployment time in control centers and command rooms.
$3,149.00 $1,776.99 Save $1,372.01

Add to Cart
The item has been added
Free shipping over $499

$3,149.00 $1,776.99 Save $1,372.01

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
ACTi

SKU: EPR8A70080-000

ACTi Iteachspider Non-motorized Mobile Stand - EPR8A70080-000
- Mobile cart design enables repositioning of iTeach Spider panels without fixed installation.
- Non-motorized stand supports flexible deployment across classrooms and meeting rooms on demand.
- Wheeled base rolls on hard flooring; lockable brakes secure the display during active use.
$1,889.00 $1,064.99 Save $824.01

Add to Cart
The item has been added
Free shipping over $499

$1,889.00 $1,064.99 Save $824.01

Add to cart Add to quote Compare
Compare

Out of stock
ACTi

SKU: CTS-KB100-WF24

ACTi Keyboard - Ergonomic Keyboard / Trackpad / - CTS-KB100-WF24
- Integrated trackpad eliminates a separate mouse, reducing desk clutter at operator stations.
- USB connectivity enables plug-and-play deployment on workstations without driver installation.
- Compatible with ACTi VMS and standard USB/PS2 VMS platforms including Milestone and Genetec.
$59.00 $58.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$59.00 $58.99 Save $0.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: 185-00472

ACTi KIT Baseplate Floor Aa-pline WHT - 185-00472
- Provides stable ground-level mounting without wall or pole structural modifications.
- Engineered specifically for ACTi Aa-pline series cameras, ensuring confirmed mechanical fit.
- White finish suits retail and indoor perimeter deployments requiring a low-profile install.
$119.90 $118.99 Save $0.91

Add to Cart
The item has been added
Free shipping over $499

$119.90 $118.99 Save $0.91

Add to quote Compare
Compare

Out of stock
ACTi

SKU: 185-01331

ACTi KIT Case Moko Surface PRO 8 Aa-accy BLK - 185-01331
- Purpose-built for Microsoft Surface PRO 8; will not fit earlier or later generations.
- Shields the tablet from drops and impacts during field ops and job site transport.
- Tool-free deployment — slide in and secure, with access to ports and kickstand.
$84.75 $83.99 Save $0.76

Add to Cart
The item has been added
Free shipping over $499

$84.75 $83.99 Save $0.76

Add to quote Compare
Compare

Out of stock
ACTi

SKU: 185-01470

ACTi KIT Case Molded Rugged Case Surface PRO 9 - 185-01470
- Precision-molded fit for Surface Pro 9 prevents shifting under vibration or impact.
- Drop-resistant housing protects tablets deployed across vehicles, sites, and control rooms.
- Ready to deploy out of the box — no assembly required before field use.
$69.99

Add to Cart
The item has been added
Free shipping over $499

$69.99

Add to quote Compare
Compare

Out of stock
ACTi

SKU: 185-01077

ACTi KIT Cradle Ingenico LINK2500I Uai/adi Aa-accy - 185-01077
- Secures Ingenico LINK2500I terminals in fixed retail and transaction-zone deployments.
- Engineered exclusively for LINK2500I (UAI/ADI form factors); not a universal mount.
- Fixed cradle positioning maintains consistent camera sightlines to the payment terminal.
$106.00 $105.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$106.00 $105.99 Save $0.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: 185-00821

ACTi KIT EZ Back Ios/apple W/o ADI - 185-00821
- Enables native iOS/Apple mobile access to ACTi EZ series surveillance systems.
- No additional ADI hardware required — software/configuration kit only.
- Authenticate over HTTPS (ports 80/443); no wiring or additional power needed.
$169.00 $168.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$169.00 $168.99 Save $0.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: 185-01151

ACTi KIT EZ Back Poetic TPU Case Samsung TAB A7 10.4 - 185-01151
- OEM-fit TPU case maintains original housing integrity for Samsung TAB A7 10.4.
- Genuine factory-sourced part preserves manufacturer warranty on the host device.
- Documented MPN 185-01151 streamlines BOM entry and depot service references.
$84.75 $83.99 Save $0.76

Add to Cart
The item has been added
Free shipping over $499

$84.75 $83.99 Save $0.76

Add to quote Compare
Compare

Out of stock
ACTi

SKU: 185-01037

ACTi KIT EZ Back TPU Case Poetic Ipad 12.9 2018 - 185-01037
- TPU construction absorbs shock, protecting tablets running VMS or remote dashboards.
- Fits iPad Pro 12.9-inch 2018 (A1876, A2014, A1980, A2013) only — verify model before deploying.
- Tool-free installation with unobstructed camera cutout supports mobile field use cases.
$75.00 $74.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$75.00 $74.99 Save $0.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: 185-01108

ACTi KIT EZ Back Usb-c PD RD With Accessory - 185-01108
- USB-C PD connector eliminates separate power supplies in compact ACTi deployments.
- Reversible USB-C interface simplifies field installation and reduces mis-connection risk.
- Supports mixed-power environments where standard PoE alone is insufficient.
$225.00 $216.99 Save $8.01

Add to Cart
The item has been added
Free shipping over $499

$225.00 $216.99 Save $8.01

Add to quote Compare

Accessories

Surveillance accessories support reliable system deployment, from mounting hardware and enclosures to power components and installation materials. Select the right supporting equipment to ensure durability, safety, and long-term performance.

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Deployment Guide PoE Planning

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Sub categories

Showing Results for Accessories

Accessories

Deployment Considerations

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading