IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Ubiquiti

SKU: UACC-WAVE-AP-MICRO-MOUNT

Ubiquiti UACC-WAVE-AP-MICRO-MOUNT Corrosion-resistant pole mount

Corrosion-resistant pole mount for up to 4 Wave APs outdoors
- Supports Wave AP Micro and Wave AP Gen2 in 360° broadcast config
- Corrosion-resistant construction rated for outdoor and coastal sites
- Single pole mount handles multi-access-point tower deployments
Special Order · Ships in 2-3 weeks

$155.99

Add to Cart
The item has been added
Compare

Out of stock
Ubiquiti

SKU: UB-AM-10

Ubiquiti UB-AM-10 Mounting Hardware

Universal antenna arm bracket 10-pack for AirMax deployments
- Compatible with Ubiquiti AirMax and sector antenna platforms
- 10-pack format sized for multi-site wireless network rollouts
- Universal mount design standardizes installation across antenna types
Special Order · Ships in 2-3 weeks

$90.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UC-DAC-SFP28

Ubiquiti UC-DAC-SFP28 SFP28 Direct Attach Copper Cable

SFP28 direct attach copper cable for UniFi switches under 10 meters
- SFP28 connectors on both ends, no transceiver modules required
- Passive copper design supports full SFP28 bandwidth for switch interconnects
- Plug-and-play installation between compatible UniFi network equipment
In stock · Ships same business day

$30.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Ubiquiti

SKU: UOC-5

Ubiquiti UOC-5 10G Multi-Mode Optical Cable

10G multi-mode fiber cable, 5m LC/SC for datacenter interconnects
- 10 Gbps throughput over multi-mode fiber for rack-to-rack connections
- LC and SC connector compatibility with standard SFP+ transceiver modules
- 5-meter length ideal for network closets, datacenters, and equipment rooms
In stock · Ships same business day

$9.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Valcom

SKU: V-9130-W

Valcom V-9130-W Remote Input Module

Wall-mount passive stereo-to-mono converter for remote PA audio inputs
- Dual RCA and 3.5mm connectors accept line-level sources without adapters
- Passive conversion requires zero external power at remote locations
- 1 lb lightweight design mounts flush to wall for distributed audio setups
In stock · Ships same business day

$56.99 $50.99 Save $6.00

Add to Cart
The item has been added
Compare

Out of stock
Valcom

SKU: V-9804

Valcom V-9804 Speaker Mounting Bracket for V-1440

Rack-mount bracket for Valcom V-1440 speakers with mic support
- Mounts V-1440 speakers in standard 19" rack configurations
- Integrated microphone connectivity for PA announcements and voice
- U.S.-manufactured mounting accessory, weighs 0.8 lb
Special Order · Ships in 2-3 weeks

$30.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Valcom

SKU: V-9805

Valcom V-9805 Vandal-Resistant Recessed Enclosure

Stainless steel recessed enclosure for FlexHorn speakers in vandal-prone areas
- Recessed wall and column mount keeps speaker flush, reducing impact risk
- Stainless steel faceplate resists corrosion, moisture, and cosmetic damage
- Fits Valcom V-1080 and V-1090 FlexHorn speakers with microphone support
In stock · Ships same business day

$98.99 $88.99 Save $10.00

Add to Cart
The item has been added
Compare

Out of stock
Valcom

SKU: V-9809

Valcom V-9809 Vandal Resistant Flexhorn Enclosure

Heavy gauge steel enclosure for Valcom FlexHorn speakers in high-impact areas
- Vandal resistant construction withstands intentional damage in gymnasiums and schools
- Surface wall mount with integrated steel faceplate for straightforward installation
- Microphone support integrated for complete audio system deployments
Special Order · Ships in 2-3 weeks

$104.99 $93.99 Save $11.00

Add to Cart
The item has been added
Compare

Out of stock
Valcom

SKU: V-9816M

Valcom V-9816M Metal Bridge Backbox Combo

Metal bridge/backbox combo for V-1420 ceiling speakers
- Integrated design combines bridge and backbox into single unit
- Fits drop ceiling and structural ceiling mounts, weighs 4.20 lbs
- Streamlines installation with no additional hardware required
Special Order · Ships in 2-3 weeks

$83.99 $74.99 Save $9.00

Add to Cart
The item has been added
Compare

Out of stock
Valcom

SKU: V-9910-YEL

Valcom V-9910-YEL Doorbox Weather Guard Yellow

Steel weather guard for Valcom doorplate speakers in outdoor settings
- Corrosion-resistant steel construction shields microphone and speaker from rain
- Yellow high-visibility finish with wall-mount integration for standard doorplate setups
- Protects audio clarity by blocking moisture, debris, and environmental exposure
Special Order · Ships in 2-3 weeks

$38.99 $34.99 Save $4.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Valcom

SKU: V-9912M-10

Valcom V-9912M-10 Metal Pre-Construction Ceiling Mounting Ring for 8-Inch Speakers

Metal pre-construction ring for 8-inch ceiling speakers, rough-in phase
- Install before drywall during framing — no retrofit tools or post-drywall patches
- Metal frame resists warping through construction and maintains flush alignment
- Compatible with 8-inch round speakers including microphone-capable models
In stock · Ships same business day

$31.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Valcom

SKU: V-9912P-12

Valcom V-9912P-12 Plastic Ceiling Mounting Ring

8-inch ceiling speaker retrofit ring for existing drywall
- Plastic construction fits standard 8-inch round ceiling speakers
- Post-construction install in existing sheetrock without framing
- Non-conductive material rated for indoor environments
In stock · Ships same business day

$28.00 $14.99 Save $13.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Valcom

SKU: V-9914M-5

Valcom V-9914M-5 Metal Ceiling Speaker Mount

Metal ceiling mount for Valcom 8-inch speakers in drop-ceiling grids
- Rigid metal frame eliminates vibration resonance for clear audio in noisy environments
- Quick-mount design reduces installation time across multi-speaker deployments
- Distributes speaker weight evenly to prevent tilting or loosening over time
In stock · Ships same business day

$19.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Valcom

SKU: V-9915M-5

Valcom V-9915M-5 Metal Backbox for Ceiling Speakers (5-Pack)

Metal backbox 5-pack for 4" and 8" ceiling speakers, drywall/tile
- Steel or aluminum construction resists deformation under ceiling load
- Fits both 4-inch and 8-inch round speaker openings with one SKU
- Integral design shields speaker components from drywall dust during install
In stock · Ships same business day

$19.99 $17.99 Save $2.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Valcom

SKU: V-9916M

Valcom V-9916M Metal Bridge/Backbox Combo for 8-Inch Ceiling Speakers

Metal bridge/backbox combo for 8-inch ceiling speakers, flush-mount
- Integrated design combines mounting bridge and backbox in one unit
- Metal construction resists vibration for stable long-term speaker mounting
- Direct ceiling installation fits standard cavities with no custom fabrication
In stock · Ships same business day

$58.00 $30.99 Save $27.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Valcom

SKU: V-ACS-X48/25

Valcom V-ACS-X48/25 48-Zone Expansion Module

Expands V-ACS25 to 48 zones without power infrastructure changes
- Scales existing V-ACS25 systems from base capacity to 48 total zones
- Maintains 25V DC operation—no rewiring or power supply redesign needed
- Rack-mount module integrates directly into standard ACS cabinet installations
In stock · Ships same business day

$3,266.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Ubiquiti UACC-WAVE-AP-MICRO-MOUNT Corrosion-resistant pole mount

Ubiquiti UB-AM-10 Mounting Hardware

Ubiquiti UC-DAC-SFP28 SFP28 Direct Attach Copper Cable

Ubiquiti UOC-5 10G Multi-Mode Optical Cable

Valcom V-9130-W Remote Input Module

Valcom V-9804 Speaker Mounting Bracket for V-1440

Valcom V-9805 Vandal-Resistant Recessed Enclosure

Valcom V-9809 Vandal Resistant Flexhorn Enclosure

Valcom V-9816M Metal Bridge Backbox Combo

Valcom V-9910-YEL Doorbox Weather Guard Yellow

Valcom V-9912M-10 Metal Pre-Construction Ceiling Mounting Ring for 8-Inch Speakers

Valcom V-9912P-12 Plastic Ceiling Mounting Ring

Valcom V-9914M-5 Metal Ceiling Speaker Mount

Valcom V-9915M-5 Metal Backbox for Ceiling Speakers (5-Pack)

Valcom V-9916M Metal Bridge/Backbox Combo for 8-Inch Ceiling Speakers

Valcom V-ACS-X48/25 48-Zone Expansion Module

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading