Sub categories

Showing Results for Accessories

Compare

Out of stock
Lifesafety Power

SKU: FLEX-IO-28-CABLE-BOXED

Lifesafety Power Flex-Io-28-Cable-Boxed Flex-Io-28-Cable-Boxed
- Pre-assembled I/O cable eliminates field-terminated connections in standard installs.
- Designed for FLEX-series power distribution platforms requiring supervised circuit wiring.
- Rated for 230VAC operation; confirm pin assignments against your specific FLEX module version.
$22.00 $21.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$22.00 $21.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FLEX-IO-72-CABLE-BOXED

Lifesafety Power Flex-Io-72-Cable-Boxed Flex-Io-72-Cable-Boxed
- Standardizes I/O field wiring for sensor inputs, relay outputs, and supervised circuits.
- Designed for FLEX series control modules, ensuring connector type alignment on deployment.
- Cable assembly form factor simplifies termination and routing within power distribution enclosures.
$28.00 $27.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$28.00 $27.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-2C82D8E4

Lifesafety Power FPO150-2C82D8E4 16 lock 16 auxiliary outputsfus
- 16 dedicated lock outputs and 16 auxiliary outputs consolidate multi-door power in one module.
- Each channel is individually fused at 3A, isolating faults so one short won't drop other circuits.
- Supports mag locks, solenoids, strikes, sirens, and relay loads within the 3A per-channel limit.
$1,044.00 $685.99 Save $358.01

Add to Cart
The item has been added
Free shipping over $499

$1,044.00 $685.99 Save $358.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-2D8E1

Lifesafety Power FPO150-2D8E1 FPO150-2D8E1
- 16 independent 3A fused outputs isolate faults so a single short won't cascade.
- Distributes regulated 12V or 24V at 150W to locks, readers, and sensors.
- E1 enclosure suits electrical closets and control rooms in access-control deployments.
$602.00 $395.99 Save $206.01

Add to Cart
The item has been added
Free shipping over $499

$602.00 $395.99 Save $206.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-2D8E4V1

Lifesafety Power FPO150-2D8E4V1 FPO150-2D8E4V1
- 150W at 12V DC sustains cameras and access control during mains failure.
- 16 fused auxiliary outputs isolate faults per circuit, preventing system-wide outages.
- E4V1 steel enclosure (24"H × 20"W × 4.5"D) fits standard commercial cabinet footprints.
$1,081.00 $710.99 Save $370.01

Add to Cart
The item has been added
Free shipping over $499

$1,081.00 $710.99 Save $370.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-2D8E6S

Lifesafety Power FPO150-2D8E6S 150W Single Voltage 120 VAC 16 Au
- 150W at 120 VAC input powers 16 auxiliary outputs from a single hardwired source.
- Supports 12 VDC and 24 VDC low-voltage devices including cameras, locks, and readers.
- Consolidates branch power distribution, eliminating sub-panels at each device location.
$1,419.00 $932.99 Save $486.01

Add to Cart
The item has been added
Free shipping over $499

$1,419.00 $932.99 Save $486.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-2D8PE6M1

Lifesafety Power FPO150-2D8PE6M1 150W Single Voltage 120 VAC 16
- 150W at 24 VDC consolidates power for up to 16 auxiliary devices in one unit.
- Single 120 VAC input simplifies wiring in rack or cabinet deployments.
- Supports cameras, access readers, intercoms, and sensors drawing 24 VDC.
$1,687.00 $1,108.99 Save $578.01

Add to Cart
The item has been added
Free shipping over $499

$1,687.00 $1,108.99 Save $578.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B1002C82D8E4

Lifesafety Power FPO150-B1002C82D8E4 16 Lock 16 Auxiliary Output
- 16 independently fused 3A lock outputs prevent a single fault from dropping the full supply.
- Dual voltage rails (12V/4A and 24V/4A) support mixed-voltage lock and device loads in one enclosure.
- 16 auxiliary outputs at 3A each power readers, REX buttons, and strobes alongside lock circuits.
$1,105.00 $725.99 Save $379.01

Add to Cart
The item has been added
Free shipping over $499

$1,105.00 $725.99 Save $379.01

Add to quote Compare
Compare

Add to Cart The item has been added
Lifesafety Power

SKU: FPO150-B1002D8E4M

Lifesafety Power FPO150-B1002D8E4M 150W Dual Voltage 120 VAC 16
- Single 120 VAC hard-wired source distributes power across 16 auxiliary outputs.
- Dual voltage output supports 12 VDC and 24 VDC devices from one cabinet-mounted unit.
- 75W rated supply eliminates daisy-chained transformers in access control installations.
$948.00 $622.99 Save $325.01

Add to Cart
The item has been added
Free shipping over $499

$948.00 $622.99 Save $325.01

Add to cart Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B1002D8PM8NLCE6M

Lifesafety Power FPO150-B1002D8PM8NLCE6M 150W Dual Voltage 120
- 150W at 120VAC input supports mixed lock and reader loads from one enclosure.
- Dual 12V/24V DC selectable output eliminates the need for a separate voltage converter.
- 8 managed lock outputs keep strike and mag-lock circuits isolated from auxiliary loads.
$2,065.00 $1,356.99 Save $708.01

Add to Cart
The item has been added
Free shipping over $499

$2,065.00 $1,356.99 Save $708.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C4P2D8PE1

Lifesafety Power FPO150-B100C4P2D8PE1 Standard Power Systems150W
- 150W regulated DC output centralizes power for cameras, locks, and readers.
- Four relay lock outputs support electromagnetic and electronic door control.
- 16 auxiliary outputs integrate sensors, strobes, and status indicators.
$682.00 $447.99 Save $234.01

Add to Cart
The item has been added
Free shipping over $499

$682.00 $447.99 Save $234.01

Add to quote Compare
Compare

Add to Cart The item has been added
Lifesafety Power

SKU: FPO150-B100C82D8PE4M/T8-A

Lifesafety Power FPO150-B100C82D8PE4M/T8-A 8DR E4M 150W 4A/12V
- 150W redundant supply delivers 4A at 12V and 4A at 24V across 8 isolated outputs.
- Dual-voltage design powers legacy 12V cameras and 24V access control from one unit.
- Eight separate output channels eliminate daisy-chain voltage sag across locks and readers.
$1,850.00 $1,215.99 Save $634.01

Add to Cart
The item has been added
Free shipping over $499

$1,850.00 $1,215.99 Save $634.01

Add to cart Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C82D8PE4M/T8-C

Lifesafety Power FPO150-B100C82D8PE4M/T8-C PreWired Mercury 8DR
- Delivers 4A at 12V and 4A at 24V simultaneously to power up to 8 door locks.
- Factory-prewired MR52 harnesses eliminate field termination and reduce install errors.
- 16 auxiliary outputs support relays, REX buttons, LEDs, and door sensors.
$1,850.00 $1,215.99 Save $634.01

Add to Cart
The item has been added
Free shipping over $499

$1,850.00 $1,215.99 Save $634.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C82D8PE4M1/T8-A

Lifesafety Power FPO150-B100C82D8PE4M1/T8-A 8DR E4M 150W 4A/12V
- Eight isolated 12V/24V rails prevent a single-device fault from collapsing system power.
- 150W envelope supports mixed mag locks, readers, and aux relays at 4A per rail.
- Ships pre-wired with tie-wrap harness, reducing bench time and installation wiring errors.
$2,076.00 $1,363.99 Save $712.01

Add to Cart
The item has been added
Free shipping over $499

$2,076.00 $1,363.99 Save $712.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C82D8PE4M1/T8-C

Lifesafety Power FPO150-B100C82D8PE4M1/T8-C 8DR E4M 150W 4A/12V
- 150W supply delivers 4A at 12V, powering up to 8 simultaneous lock solenoids.
- Factory pre-wired 8-door relay outputs reduce installation time in multi-door deployments.
- Switchable 12V/24V output supports both fail-safe and fail-secure lock circuit types.
$2,076.00 $1,363.99 Save $712.01

Add to Cart
The item has been added
Free shipping over $499

$2,076.00 $1,363.99 Save $712.01

Add to quote Compare
Compare

Add to Cart The item has been added
Lifesafety Power

SKU: FPO150-B100C82D8PE6M/T8-A

Lifesafety Power FPO150-B100C82D8PE6M/T8-A 8DR E6M 150W 4A/12V&4A
- Dual-rail 12V/24V DC output powers mixed-voltage devices from a single 150W chassis.
- Eight independent outputs let you distribute mag locks, strikes, and strobes without daisy-chaining.
- 120V AC mains input; each output rail is capped at 4A to prevent thermal overload.
$2,422.00 $1,590.99 Save $831.01

Add to Cart
The item has been added
Free shipping over $499

$2,422.00 $1,590.99 Save $831.01

Add to cart Add to quote Compare

Accessories

Surveillance accessories support reliable system deployment, from mounting hardware and enclosures to power components and installation materials. Select the right supporting equipment to ensure durability, safety, and long-term performance.

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Deployment Guide PoE Planning

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Sub categories

Showing Results for Accessories

Accessories

Deployment Considerations

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading