Panduit F92ERB1LNSNM008 8m LC/APC SM Fiber Patch Cord

Panduit F92ERB1LNSNM008 Opti-Core OS2 Single-Mode Fiber Patch Cord

The Panduit F92ERB1LNSNM008 Opti-Core fiber patch cord delivers 8-meter single-mode connectivity with LC/APC to duplex LC termination for high-bandwidth data networks, IP surveillance backbones, and fiber distribution systems. OS2-rated 9/125µm glass supports distances up to 10km at 10Gb/s and 40km at 1Gb/s, making this cord suitable for campus fiber links, datacenter interconnects, and long-haul security system transmission where copper falls short. The LC/APC angled physical contact connector on one end reduces back reflection below -60dB — critical for preventing signal degradation in dense wavelength-division multiplexing (DWDM) systems, high-speed storage networks, and sensitive analog video-over-fiber links. Standard duplex LC termination on the opposite end provides backward compatibility with legacy patch panels and transceiver modules that lack APC polish.

Key Features

• OS2 single-mode 9/125µm fiber supports 10Gb/s to 10km, 1Gb/s to 40km
• LC/APC angled connector minimizes back reflection for DWDM and high-speed links
• 1.6mm cable diameter — 20% thinner than standard 2mm cordage for tighter bend radius and dense patch-panel routing
• OFNR riser-rated jacket meets NEC Article 770 for vertical cable runs between floors
• Yellow PVC jacket follows TIA-598-C color standard for single-mode identification
• Standard insertion loss specification for predictable link budgets
• Duplex LC termination on second end for compatibility with SFP/SFP+ modules
• 8-meter (26.2 ft) length spans rack rows, equipment rooms, or short building risers

Single-mode OS2 fiber is the backbone choice for installations where distance or bandwidth exceed Cat6A limitations. At 8 meters this cord bridges fiber switches, media converters, IP camera NVR uplinks, or building entry points to fiber patch panels. The 9µm core diameter and 1310nm/1550nm wavelength compatibility future-proof the link for 25G/40G/100G upgrades without cable replacement — critical for projects with 10+ year lifecycles. LC/APC's 8° angled endface physically directs reflected light into the cladding rather than back down the core, yielding return loss better than -60dB compared to -50dB for standard UPC polish. In practice this matters for coherent optical systems, RF-over-fiber distributions, and any DWDM deployment where back reflection accumulates across multiple splices and connectors.

The 1.6mm reduced-diameter construction uses tight-buffered 900µm fiber inside a compact PVC jacket. You gain 20% smaller bend radius compared to 2mm cordage — significant when dressing cables behind shallow patch panels or routing through crowded cable managers in 2-post racks. OFNR (Optical Fiber Nonconductive Riser) flammability rating meets NEC 770.154(A) requirements for vertical runs between floors without conduit, provided you stay within the same building. For inter-building runs or plenum air-handling spaces you need OFNP rating instead; this cord is explicitly riser-only. Yellow jacket color follows TIA-598-C Annex A convention: yellow always indicates single-mode fiber, preventing the tech from accidentally cross-connecting multimode OM3/OM4 (aqua) and single-mode (yellow) in the same rack — a mistake that kills the link.

The duplex LC termination on the non-APC end offers flexibility: connect both APC sides for a full low-reflection link, or use the APC end at the DWDM/CWDM multiplexer (where back reflection matters most) and the UPC end at a standard network switch SFP port (where UPC is often factory-installed). Standard insertion loss spec (typically ≤0.3dB but check Panduit datasheet for the tested value) ensures the cord contributes minimally to your link budget. At 8 meters you're well within single-mode attenuation limits even for 40km-rated optics. Panduit Opti-Core cordage ships with protective dust caps on all connectors and includes alignment keys molded into the LC housing to prevent insertion damage. The cord arrives in a 10-unit carton for project quantities; individual unit packaging protects each cord during staging and prevents tangling on the install cart.

This cord fits installations governed by EN 60332-1-2 vertical flame propagation standards (common in EU-funded projects) and meets Panduit's ISO 9001 manufacturing quality system. For projects requiring bend-insensitive fiber (G.657.A2/B3 for tight 7.5mm radius routing) or armored jackets for outside-plant pulls, verify those requirements with your fiber link budget before specifying; this is a standard G.652.D indoor riser cord optimized for typical equipment-room and IDF installations where you have controlled pathways and moderate bend stress.