IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
STI

SKU: STI-HTR150T

STI STI-HTR150T Radiant Heater with Thermostat 150W

150W radiant heater with thermostat for outdoor access control
- 150W output maintains enclosure temperature in cold-weather deployments
- Integrated thermostat automatically regulates heating without manual adjustment
- 9VDC operation integrates directly with security system power supplies
Special Order · Ships in 2-3 weeks

$442.18 $280.99 Save $161.19

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
STI

SKU: STI-SA5000-B

STI STI-SA5000-B Select-Alert Mini Controller

Compact controller for 32 users with HID and NFC support
- Manages up to 32 credentials across HID proximity and NFC 13.56MHz readers
- N.C. 12VDC 50mA dry contact strike output for electromagnetic locks
- 9VDC input with tamper alert—configurable 15, 30, or 60 second delays
In stock · Ships same business day

$90.43 $56.99 Save $33.44

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
STI

SKU: STI-SA5000-G

STI STI-SA5000-G Select-Alert Mini Controller

Compact networked lock controller with 9VDC power and TCP/IP connectivity
- TCP/IP Ethernet integration for direct LAN connection without protocol converters
- 9VDC input compatible with battery backup and existing low-voltage power supplies
- Mini form factor fits wall, pendant, corner, or rack mount in space-constrained sites
In stock · Ships same business day

$90.43 $54.99 Save $35.44

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
STI

SKU: STI-SA5500-B

STI STI-SA5500-B Select-Alert Siren/Strobe Controller

Dry contact relay controller for siren/strobe alerts with dual credential support
- Switches 12VDC siren and strobe devices at 50mA without separate relay module
- Accepts HID 125 kHz and NFC/13.56 MHz credentials from single controller
- Stores up to 32 user credentials locally for offline operation and reduced latency
In stock · Ships same business day

$83.78 $53.99 Save $29.79

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-SA5500-C

STI STI-SA5500-C Select-Alert Siren/Strobe Controller

Networked siren/strobe controller with dual protocols for access alerts
- TCP/IP and RS-232 connectivity integrates with HID systems up to 32 users
- Tamper detection via dry contact triggers 15–60 second alert sequences
- 9VDC operation across 32–120°F temperature range for indoor deployments
Special Order · Ships in 2-3 weeks

$83.78 $53.99 Save $29.79

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-SA5600-G

STI STI-SA5600-G Select-Alert Siren/Strobe Controller

TCP/IP siren/strobe controller for up to 32 concurrent users
- Centralized management of STI Select-Alert audio and visual devices
- Network-deployed with TCP/IP communication for remote monitoring
- Tamper detection via dry contact input; operates 32°F to 120°F
Special Order · Ships in 2-3 weeks

$79.86 $49.99 Save $29.87

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-SA5600-R

STI STI-SA5600-R Select-Alert Siren/Strobe Controller

TCP/IP controller for Select-Alert siren and strobe systems, 32 concurrent users
- Centralized management of audio/visual alerts across distributed zones via TCP/IP
- Supports up to 32 concurrent users on networked deployments from single 9VDC supply
- Built-in tamper detection with N.C. dry contact triggers alert on unit removal
Special Order · Ships in 2-3 weeks

$79.86 $50.99 Save $28.87

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-TSTAT543F

STI STI-TSTAT543F Dual Thermostat Fan Control & Alarm

Dual-zone thermostat with fan control and alarm for equipment enclosures
- Independent temperature monitoring on two zones with integrated fan outputs
- 9VDC operation integrates directly into security and HVAC control systems
- Alarm signaling channels alert on thermal events in server rooms and cabinets
Special Order · Ships in 2-3 weeks

$74.99

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-V34104

STI STI-V34104 4-Channel Voice Receiver

4-channel voice receiver for multi-door access control systems
- Four independent voice channels for simultaneous communication across zones
- 12VDC operation with jack-type power supply (STI-34105 sold separately)
- Integrates with STI access control and intercom system deployments
Special Order · Ships in 2-3 weeks

$126.90 $85.99 Save $40.91

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-V6400WIR4

STI STI-V6400WIR4 Wireless Exit Stopper with Voice Receiver

Wireless exit stopper with voice receiver for access control integration
- 9VDC operation with wireless communication and two-way voice interaction
- Compact 5.375" × 5.375" × 2" form factor fits standard door frame cutouts
- Includes 9V battery, visual beacon alarm, and 21-language label options
Special Order · Ships in 2-3 weeks

$287.01 $195.99 Save $91.02

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-1200A-FR

STI Stopper II® with 4" Deep Enclosed Back Box, French Label

NEMA 3R enclosed back box for outdoor access control, 4" depth
- Weatherproof neoprene construction rated NEMA 3R for exposed installations
- 24VDC powered with TCP/IP communication for standard access control networks
- French-labeled for international deployments, 4" depth fits standard wiring
Special Order · Ships in 2-3 weeks

$205.18 $130.99 Save $74.19

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-1150

STI Stopper II® with Horn Flush Mount (Indoor/Outdoor Rated), Fire ...

Flush-mount 9VDC electric strike with horn for fire-rated doors
- Integrated horn provides audible feedback during door strike actuation
- Indoor/outdoor rated design works in standard and fire-rated door frames
- 9VDC operation integrates directly with access control panel relay outputs
Special Order · Ships in 2-3 weeks

$140.99

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-1150-FR

STI Stopper II® with Horn Flush Mount (Indoor/Outdoor Rated), Frenc...

Flush-mount horn with TCP/IP networking for indoor/outdoor alerts
- TCP/IP networked audio signaling integrates with access control systems
- IP54-rated dome design withstands indoor and outdoor environments
- 9VDC operation for distributed facility notification deployments
Special Order · Ships in 2-3 weeks

$140.99

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-1150NR

STI Stopper II® with Horn Flush Mount (Indoor/Outdoor Rated), No Label

Horn flush mount strike, 9VDC, rated indoor/outdoor access control
- Flush mount design integrates into standard door frames for retrofit/new build
- 9VDC electromagnetic strike compatible with STI access control systems
- IP54-rated construction handles both interior and exterior installations
Special Order · Ships in 2-3 weeks

$140.99

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: SS2127PX-EN

STI Stopper® Station Push Button with Stopper® Station Shield, Mome...

Hardened push button with shield for 30VDC magnetic lock control
- Integrated protective shield guards against impact in high-traffic areas
- Compatible with TYPE 23 magnetic lock strikes for access control systems
- Compact 6.36" × 3.22" footprint mounts with standard 3/16" drill holes
Special Order · Ships in 2-3 weeks

$154.33 $105.99 Save $48.34

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: SS2329PO-EN

STI Stopper® Station Push Button with Stopper® Station Shield, Turn...

30VDC push button station with shield for magnetic lock activation
- Integrated operator shield protects against accidental contact during use
- Works with 30VDC magnetic lock strike systems for secure door control
- Compact 6.36" W × 3.22" H footprint includes mounting hardware and drill template
Special Order · Ships in 2-3 weeks

$96.80 $65.99 Save $30.81

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

STI STI-HTR150T Radiant Heater with Thermostat 150W

STI STI-SA5000-B Select-Alert Mini Controller

STI STI-SA5000-G Select-Alert Mini Controller

STI STI-SA5500-B Select-Alert Siren/Strobe Controller

STI STI-SA5500-C Select-Alert Siren/Strobe Controller

STI STI-SA5600-G Select-Alert Siren/Strobe Controller

STI STI-SA5600-R Select-Alert Siren/Strobe Controller

STI STI-TSTAT543F Dual Thermostat Fan Control & Alarm

STI STI-V34104 4-Channel Voice Receiver

STI STI-V6400WIR4 Wireless Exit Stopper with Voice Receiver

STI Stopper II® with 4" Deep Enclosed Back Box, French Label

STI Stopper II® with Horn Flush Mount (Indoor/Outdoor Rated), Fire ...

STI Stopper II® with Horn Flush Mount (Indoor/Outdoor Rated), Frenc...

STI Stopper II® with Horn Flush Mount (Indoor/Outdoor Rated), No Label

STI Stopper® Station Push Button with Stopper® Station Shield, Mome...

STI Stopper® Station Push Button with Stopper® Station Shield, Turn...

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading