IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Speco Technologies

SKU: PBMRK2

Speco Technologies PBMRK2 Rack Mount Pair

Two-unit 19-inch rack mount pair for standard EIA-310 cabinets
- Fits Speco and third-party equipment in a single 19-inch rack enclosure
- Pair configuration supports dual-rail mounting for larger networked devices
- Stabilizes equipment in server rooms and network closets with fixed positioning
In stock · Ships same business day

$49.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Speco Technologies

SKU: PMT1

Speco Technologies PMT1 Pole Mount for Compact Cameras

Pole mount for 7 Speco compact cameras; fits 1.5–2.5 inch poles
- Secures O4VLD5, O4VLB5, O4B6M, O8B6M, O4VB6, O4B7M, O4T7 models
- Outdoor and semi-outdoor rated; eliminates custom fabrication labor
- Lightweight at 2.65 lbs; white finish; standard utility pole compatible
In stock · Ships same business day

$85.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: PMT1G

Speco Technologies PMT1G Pole Mount for Dark Grey Speco Blue Mode

Pole mount for dark grey Speco Blue series cameras, outdoor rated
- Field-installable pole mount designed for elevated outdoor surveillance
- Dark grey finish matches Speco Blue camera housing for clean aesthetics
- Weighs 2.78 lbs with compact 5.0 x 6.5 x 3.2 in footprint
Special Order · Ships in 2-3 weeks

$69.00 $31.99 Save $37.01

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: PMT3

Speco Technologies PMT3 Pole mount for O4BXLP1M

Pole mount for Speco O4BXLP1M outdoor camera installations
- Designed specifically for O4BXLP1M camera compatibility and secure pole mounting
- Field-proven construction rated for outdoor fixed positioning and weather exposure
- White finish pole mount assembly for standard exterior security deployments
Special Order · Ships in 2-3 weeks

$28.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: PNDMT

Speco Technologies PNDMT Pendant Mount for HT7246T1

Pendant ceiling mount for Speco HT7246T1 suspended installations
- Direct mount to HT7246T1 with no adapters or modifications needed
- Compatible with drop ceiling and hard ceiling environments
- White housing, 2.35 lbs weight for discrete pendant deployment
Special Order · Ships in 2-3 weeks

$236.80 $93.99 Save $142.81

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Speco Technologies

SKU: POEINJ60

Speco Technologies POEINJ60 60W PoE Injector

60W midspan PoE injector for cameras and access control without switch upgrade
- 60W continuous output supports multiple PoE/PoE+ devices or single high-power endpoint
- Gigabit pass-through (10/100/1000 Mbps) maintains full data rates on input and output
- 802.3af and 802.3at compatible; installs inline with zero configuration required
In stock · Ships same business day

$111.80 $44.99 Save $66.81

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: POL28DW

Speco Technologies POL28DW Pole Mount

Pole mount bracket for dome cameras in outdoor retail and perimeter surveillance
- Weather-resistant construction rated for outdoor environments on standard poles
- Compatible with Speco and third-party dome cameras for flexible deployments
- Stable mounting platform for retail, parking, and perimeter security applications
Special Order · Ships in 2-3 weeks

$41.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: PSDC24

Speco Technologies PSDC24 12VDC @ 2A Power Supply UL Listed

Compact 12VDC @ 2A regulated power supply, UL listed for security systems
- 12VDC @ 2A output powers cameras, DVRs, and access control devices
- UL listed with cabinet-mount form factor for indoor security installations
- Standard DC barrel connector integrates with existing surveillance equipment
Special Order · Ships in 2-3 weeks

$42.80 $18.99 Save $23.81

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: PSR4C

Speco Technologies PSR4C 4 Amp Regulated 12VDC Power Supply with

12VDC 4-amp regulated power supply for security cameras and access control
- 4 amps continuous output with regulated DC for voltage stability
- Includes cigarette lighter adapter for flexible indoor deployment
- Compatible with cameras, DVRs, alarm panels, and access control devices
Special Order · Ships in 2-3 weeks

$56.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: PSW4

Speco Technologies PSW4 24VAC 50VA Power Supply

24VAC 50VA power supply for surveillance cameras and access control
- 50VA output supports multiple standard-power cameras in one installation
- 24VAC regulated output compatible with Speco and third-party devices
- Compact indoor unit (4.0 x 3.0 x 3.0 in) for centralized power distribution
Special Order · Ships in 2-3 weeks

$88.80 $31.99 Save $56.81

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Speco Technologies

SKU: PSW5

Speco Technologies PSW5 1 Amp 12VDC Regulated Power Supply

12VDC regulated supply for access control and encoders without voltage sag
- 1 Amp 12VDC output keeps devices stable across long cable runs
- 100–240 VAC input works globally; compact indoor form factor
- Positioned near endpoints eliminates single-point-of-failure power topology
In stock · Ships same business day

$39.50 $22.99 Save $16.51

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: PVM27

Speco Technologies PVM27 27-inch Public View Monitor with 5MP IP

27" monitor with 5MP IP + 2MP TVI dual cameras and 1TB microSD
- 5MP IP camera with 2MP TVI sensor for dual-stream recording redundancy
- True WDR + automatic day/night mode handles mixed lighting without manual adjustment
- H.265/H.264 compression with up to 1TB microSD storage reduces bandwidth and costs
Special Order · Ships in 2-3 weeks

$3,385.00 $1,488.99 Save $1,896.01

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: PVMMT75

Speco Technologies PVMMT75 VESA 75 Mount for PVM10 and O5DH

VESA 75 bracket mount for PVM10 and O5DH display monitors
- Metal construction bracket secures monitors to VESA 75 standard mounting
- Designed specifically for Speco PVM10 and O5DH monitor compatibility
- White finish bracket for control room and surveillance installations
Special Order · Ships in 2-3 weeks

$75.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Speco Technologies

SKU: SB11M

Speco Technologies SB11M 1024-Channel Enterprise NVR

1024-channel enterprise NVR for unified multi-site IP video management
- Handles 1024 concurrent IP camera streams with H.264, H.265, MJPEG simultaneously
- ONVIF Profile S, T, G compliance works with any standards-conformant camera
- Scalable NAS and direct-attached storage for continuous 24/7 recording across sites
In stock · Ships same business day

$7,970.50 $3,167.99 Save $4,802.51

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: SBPM2CLT

Speco Technologies SBPM2CLT Speco Blue Parapet Mount Adapter to 1

Parapet mount adapter converts 1" NPT to ceiling mount for Speco Blue
- Converts 1" NPT connections to standard ceiling mount configurations
- Compatible with Speco Blue Series cameras for perimeter surveillance
- Rated for indoor and outdoor parapet and ledge installations
Special Order · Ships in 2-3 weeks

$16.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Speco Technologies

SKU: SO-O4D6WM

Speco Technologies SO-O4D6WM Wall Mount Bracket for Dome Cameras

Wall mount bracket for Speco dome cameras in fixed surveillance
- Compatible with O4D7M, O8D7M, VLDT6M, H8D6M dome and turret models
- Cable routing behind bracket assembly keeps connections hidden and protected
- Fasteners included; installs on drywall, concrete, and metal studs indoors/out
In stock · Ships same business day

$85.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Speco Technologies PBMRK2 Rack Mount Pair

Speco Technologies PMT1 Pole Mount for Compact Cameras

Speco Technologies PMT1G Pole Mount for Dark Grey Speco Blue Mode

Speco Technologies PMT3 Pole mount for O4BXLP1M

Speco Technologies PNDMT Pendant Mount for HT7246T1

Speco Technologies POEINJ60 60W PoE Injector

Speco Technologies POL28DW Pole Mount

Speco Technologies PSDC24 12VDC @ 2A Power Supply UL Listed

Speco Technologies PSR4C 4 Amp Regulated 12VDC Power Supply with

Speco Technologies PSW4 24VAC 50VA Power Supply

Speco Technologies PSW5 1 Amp 12VDC Regulated Power Supply

Speco Technologies PVM27 27-inch Public View Monitor with 5MP IP

Speco Technologies PVMMT75 VESA 75 Mount for PVM10 and O5DH

Speco Technologies SB11M 1024-Channel Enterprise NVR

Speco Technologies SBPM2CLT Speco Blue Parapet Mount Adapter to 1

Speco Technologies SO-O4D6WM Wall Mount Bracket for Dome Cameras

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading