IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Speco Technologies

SKU: INTCM

Speco Technologies INTCM Corner Mount

Corner mount bracket for Speco cameras indoors and outdoors
- Compatible with HTINB, HT70, VL50, VL70, and DNV series cameras
- White corner bracket designed for stable indoor and outdoor deployment
- Optimizes camera positioning in corner-mounted surveillance configurations
Special Order · Ships in 2-3 weeks

$28.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: INTCM1

Speco Technologies INTCM1 Grey Corner Mount- Compatible with INTW

Corner mount for INTWM1 camera systems in retail and commercial spaces
- Grey powder-coated finish designed for discrete corner positioning on walls and ceilings
- Compatible with INTWM1-based Speco surveillance camera systems for flexible deployment
- Indoor corner mount extends camera placement options in retail, commercial, and institutional settings
Special Order · Ships in 2-3 weeks

$39.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: INTCMW

Speco Technologies INTCMW White Corner Mount

White corner mount for 20+ Speco dome and turret cameras
- Fits HTINB, HT7048, HT7049, VL7038, VL7039, IRVF, 5100–5915, DNV series
- Mechanical fastening for permanent indoor and outdoor installations
- Compact corner design for discrete placement in standard environments
Special Order · Ships in 2-3 weeks

$30.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: INTJBSW

Speco Technologies INTJBSW White Square Junction Box- See Website

White square junction box for Speco IP camera cable management
- Square form factor mounts indoors on walls or ceilings for compact installations
- Centralizes camera wiring, power, and network connections in one routing point
- Compatible with Speco Technologies IP camera systems for integrated deployments
Special Order · Ships in 2-3 weeks

$73.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: INTPM

Speco Technologies INTPM Pendant Mount for various cameras

Pendant ceiling mount for Speco indoor surveillance cameras
- Suspended ceiling installation for HTIND, 7200/5300 series, and DNV cameras
- White housing designed for commercial and institutional indoor spaces
- Secure bracket attachment with flexible positioning on drop ceilings
Special Order · Ships in 2-3 weeks

$164.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: INTWM1

Speco Technologies INTWM1 Wall mount compatible w/ CVCJBD1/CVCJBD

Wall mount for CVCJBD1/CVCJBD2 cameras, indoor and outdoor
- White surface-mount bracket designed for CVCJBD1 and CVCJBD2 models
- Rated for both indoor and outdoor wall installations
- Compatible with Speco CVCJBD camera series for flexible deployments
Special Order · Ships in 2-3 weeks

$56.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: INTWMT

Speco Technologies INTWMT Wall Mount for HT7246T1

Wall mount for Speco HT7246T1 indoor fixed camera positioning
- Designed specifically for HT7246T1 camera compatibility and secure installation
- Indoor fixed positioning with white housing and compact 10.62 x 6.25 x 4.0 in form
- Lightweight 2.6 lb mount for straightforward wall-based deployment in commercial spaces
Special Order · Ships in 2-3 weeks

$86.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: INTWMW

Speco Technologies INTWMW White Wall Mount

White wall mount for Speco indoor dome cameras
- Compatible with 16+ Speco dome models including HTIND8, HTIND9, HTIND10
- White powder-coated finish blends with interior walls for discrete mounting
- Straightforward mechanical installation for offices, retail, and lobbies
Special Order · Ships in 2-3 weeks

$54.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Speco Technologies

SKU: JB2

Speco Technologies JB2 Speco JB2 Alternate Junction Box

Centralized junction box for organized power and signal routing
- Consolidates multiple camera feeds and power connections in one box
- Indoor-rated white housing designed for clean cable management
- Simplifies multi-camera system wiring with single aggregation point
In stock · Ships same business day

$62.50 $22.99 Save $39.51

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: JB2G

Speco Technologies JB2G Large Junction Box Speco Blue- Fxed Lens

Large junction box for mixed Speco camera types with PoE/12VDC
- Supports bullet, turret, and dome fixed-lens cameras in one termination point
- Tool-free RJ45 and power distribution with grey powder-coated steel housing
- Indoor/outdoor rated with multiple camera termination points and standard connectors
Special Order · Ships in 2-3 weeks

$62.50 $22.99 Save $39.51

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Speco Technologies

SKU: JB3

Speco Technologies JB3 Multi-Camera Junction Box

Hub consolidates power and video for O-series Speco cameras
- PoE distribution connects multiple cameras to single downstream feed
- Reduces cable runs and conduit load with hub-and-spoke topology
- Mounts indoors at junction or protected backplate locations
In stock · Ships same business day

$56.00 $29.99 Save $26.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Speco Technologies

SKU: JB3G

Speco Technologies JB3G Junction Box for Blue Series Cameras

Junction box for Speco Blue series cameras with RJ-45, BNC, and 12VDC
- Wall or surface mount design consolidates power, video, and control in one enclosure
- Dark gray powder-coated finish resists UV fading and corrosion in outdoor or harsh environments
- Built specifically for Blue series cameras—connector types engineered to match exact specifications
In stock · Ships same business day

$56.00 $22.99 Save $33.01

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: KVMHD1

Speco Technologies KVMHD1 HDMI Extender via Ethernet with KVM con

4K HDMI extender with KVM control over single Ethernet to 230 feet
- 4K UHD (3840×2160) video + keyboard/mouse control via Cat5e or higher
- Extends HDMI source up to 230 feet on one Ethernet cable, no extra runs
- DC 5V powered; wired connection eliminates wireless interference in control rooms
Special Order · Ships in 2-3 weeks

$101.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: LCMT1

Speco Technologies LCMT1 Long Corner Mount for O84S

Long corner mount for Speco O84S cameras, wall or structural installation
- Purpose-built for O84S models with extended reach for optimal corner positioning
- Rated for indoor and outdoor surveillance applications on structural surfaces
- White finish, 43.3" length fits compact footprint in retail and facility deployments
Special Order · Ships in 2-3 weeks

$89.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Speco Technologies

SKU: LPMT1

Speco Technologies LPMT1 Long Pole Mount for O84S

Long pole mount for Speco O84S outdoor surveillance cameras
- Designed for O84S camera compatibility with standard pole installation
- Outdoor-rated white mount supports elevated fixed surveillance positioning
- Pole mount accessory for secure camera mounting in outdoor deployments
In stock · Ships same business day

$685.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: LWMT1

Speco Technologies LWMT1 Long Wall Mount for O84S

Long wall mount for Speco O84S cameras, indoor/outdoor use
- Designed specifically for O84S camera compatibility and secure mounting
- Includes mount assembly and all necessary hardware for wall installation
- Supports both indoor and outdoor wall-mounted surveillance deployments
Special Order · Ships in 2-3 weeks

$86.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Speco Technologies INTCM Corner Mount

Speco Technologies INTCM1 Grey Corner Mount- Compatible with INTW

Speco Technologies INTCMW White Corner Mount

Speco Technologies INTJBSW White Square Junction Box- See Website

Speco Technologies INTPM Pendant Mount for various cameras

Speco Technologies INTWM1 Wall mount compatible w/ CVCJBD1/CVCJBD

Speco Technologies INTWMT Wall Mount for HT7246T1

Speco Technologies INTWMW White Wall Mount

Speco Technologies JB2 Speco JB2 Alternate Junction Box

Speco Technologies JB2G Large Junction Box Speco Blue- Fxed Lens

Speco Technologies JB3 Multi-Camera Junction Box

Speco Technologies JB3G Junction Box for Blue Series Cameras

Speco Technologies KVMHD1 HDMI Extender via Ethernet with KVM con

Speco Technologies LCMT1 Long Corner Mount for O84S

Speco Technologies LPMT1 Long Pole Mount for O84S

Speco Technologies LWMT1 Long Wall Mount for O84S

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service