IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Hanwha

SKU: SBO-100B1

Hanwha SBO-100B1 Aluminum Backbox for Bullet Cameras

Aluminum backbox for Hanwha bullet cameras with outdoor weather resistance
- Corrosion-resistant aluminum construction for coastal and high-humidity environments
- Custom-fit design for Hanwha bullet cameras eliminates shimming and misalignment
- Wall, pole, and corner-mount hardware included for flexible installation
In stock · Ships same business day

$49.00 $32.99 Save $16.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBV-A14B

Hanwha SBV-A14B Polycarbonate Back Box for A Series Cameras

White polycarbonate back box for Hanwha A Series cameras
- Fits standard US electrical gang boxes—no custom drilling or framing
- 5.67" diameter, 2.01" depth for compact wall-mounted installations
- UV-resistant polycarbonate won't rust or corrode in indoor/outdoor areas
In stock · Ships same business day

$34.99 $23.99 Save $11.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: PC140-DM45

Hikvision PC140-DM45 Pendant Cap Mount

Pendant mount for Hikvision dome cameras—suspend from overhead structures
- Suspends cameras from ceiling joists, pipes, or grid systems where wall/ceiling mounting isn't feasible
- Quick-attach design integrates directly with Hikvision dome camera series without adapters
- Color-coordinated finish and durable engineered materials blend with dome housing
In stock · Ships same business day

$39.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02025-001

Axis TP3603 Conduit Back Box ½" ¾" - 02025-001

Weatherproof conduit back box for Axis IP cameras indoors and out
- ½" and ¾" conduit entries for code-compliant cable management
- Weatherproof construction protects connections from rain and dust
- Houses relay boards and terminals alongside camera bracket mounting
In stock · Ships same business day

$69.06 $66.99 Save $2.07

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
2N

SKU: 01351-001

2N IP Force Gooseneck Stand - 01351-001

Gooseneck stand for 2N IP Force/Safety intercoms at vehicle checkpoints
- High-grade metal construction resists UV and corrosion in outdoor environments
- Gooseneck arm positions intercom at driver eye-level for clear communication
- Fixed floor-mount base provides stable platform for checkpoint and toll booth use
In stock · Ships same business day

$362.21 $351.99 Save $10.22

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5801-471

Axis A8105-E Clear Dome Cover Replacement 5 pcs - 5801-471

Clear dome replacement covers for AXIS A8105-E door stations, pack of 5
- Clear polycarbonate construction maintains optical clarity for unobstructed video
- Vandal-resistant design protects against tampering and impact damage
- Five covers per pack for spare inventory and multi-door installations
Special Order · Ships in 2-3 weeks

$41.23 $39.99 Save $1.24

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-215HMW

Hanwha SBP-215HMW White Cap Adapter

White cap adapter for Hanwha cameras with heat-reflective finish
- Weatherproof plastic construction protects against rain, snow, and UV
- White finish reflects solar heat to reduce thermal buildup on camera
- Tool-free quick-attach mounting with included hardware and instructions
In stock · Ships same business day

$40.00 $26.99 Save $13.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-168HM

Hanwha SBP-168HM Ceiling Mount Cap Adapter for XNP-6120H

Ceiling mount adapter for XNP-6120H with IP66 weather sealing
- XNP-6120H exclusive fit—verify camera model before ordering
- IP66 rated for dust and water resistance in covered outdoor locations
- Operates -20°C to 50°C; weather-resistant materials resist corrosion
In stock · Ships same business day

$79.00 $59.99 Save $19.01

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5505-031

Axis 5505-031 1M Multicable A I/O Audio Power

1M multicable consolidates 12VDC power, audio, and alarm I/O
- Single cable integrates power, audio, and alarm I/O connectivity
- 1-meter length ideal for flexible indoor and outdoor camera placement
- Multi-connector design compatible with Axis surveillance cameras and devices
Special Order · Ships in 2-3 weeks

$103.08 $99.99 Save $3.09

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5507-401

Axis T94B01P Conduit Back Box Accessory - 5507-401

Conduit back box for M3044/M3045/M3046 compact domes with ½" ACI
- ½" NPT and M20 pipe compatibility fits standard building infrastructure
- Integrated 1/4"-20 tripod thread mounts camera directly to box
- ½" ACI interface routes cables through conduit cleanly and protected
In stock · Ships same business day

$34.01 $32.99 Save $1.02

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302PM

Hanwha SBP-302PM Pole Mount for Bullet Cameras

Pole mount for Hanwha bullet cameras on 80mm+ posts with angle adjust
- Stainless steel straps resist corrosion in outdoor parking lots and building entrances
- Dark gray finish blends into infrastructure without visual clutter
- Adjustable tilt positioning lets you dial in coverage angles after installation
In stock · Ships same business day

$79.00 $59.99 Save $19.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5901-391

Axis P55-E Screw Kit for Wall Mounts - 5901-391

Bayonet screw kit for P55-E PTZ cameras on T91G61/T91L61 mounts
- Quick-connect bayonet screws with securing locks prevent vibration loosening
- Three springs dampen thermal cycles and mechanical fatigue during pan-tilt duty
- Precision-fit hardware for P55-E Series eliminates over-tightening risk
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: CB135

Hikvision CB135 Wire Intake Box for Dome Camera

Sealed wire intake box for dome cameras in wet and coastal environments
- IP66-rated aluminum alloy housing keeps moisture away from connectors
- Direct-mount design for DS-2CD23x5/7G1 and DS-2TD1217 dome series
- Anodized construction resists corrosion in salt-air and high-humidity sites
In stock · Ships same business day

$30.00 $21.99 Save $8.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02992-001

Axis Camera Station Pro - 02992-001

Pro VMS license for mixed Axis and third-party cameras, 1-year term
- Live multi-camera viewing and recording search across Axis IP cameras, encoders, ONVIF devices
- AcuSense deep learning analytics: people counting, intrusion detection, loitering alerts
- Access control integration, metadata export, on-premises or cloud deployment options
In stock · Ships same business day

$53.60 $51.99 Save $1.61

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01798-001

Axis TP3901 Microphone Kit Accessory - 01798-001

Integrated microphone kit for AXIS P32-LV cameras with synchronized audio
- Microphone with protective white casing matches Axis camera aesthetics
- Powers directly from camera connection—no separate audio supply needed
- Pairs video and audio recording for incident documentation and liability
In stock · Ships same business day

$56.69 $54.99 Save $1.70

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-HCF

Hanwha SBP-HCF 1.5" Coupler

1.5" dual female coupler for surveillance component connections
- Dual female threads connect 1.5" threaded surveillance components end-to-end
- Ivory finish blends with standard security equipment installations
- High-quality durable construction eliminates need for intermediate adapters
Special Order · Ships in 2-3 weeks

$15.00 $10.99 Save $4.01

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Hanwha SBO-100B1 Aluminum Backbox for Bullet Cameras

Hanwha SBV-A14B Polycarbonate Back Box for A Series Cameras

Hikvision PC140-DM45 Pendant Cap Mount

Axis TP3603 Conduit Back Box ½" ¾" - 02025-001

2N IP Force Gooseneck Stand - 01351-001

Axis A8105-E Clear Dome Cover Replacement 5 pcs - 5801-471

Hanwha SBP-215HMW White Cap Adapter

Hanwha SBP-168HM Ceiling Mount Cap Adapter for XNP-6120H

Axis 5505-031 1M Multicable A I/O Audio Power

Axis T94B01P Conduit Back Box Accessory - 5507-401

Hanwha SBP-302PM Pole Mount for Bullet Cameras

Axis P55-E Screw Kit for Wall Mounts - 5901-391

Hikvision CB135 Wire Intake Box for Dome Camera

Axis Camera Station Pro - 02992-001

Axis TP3901 Microphone Kit Accessory - 01798-001

Hanwha SBP-HCF 1.5" Coupler

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading