IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Axis

SKU: 01677-001

Axis DIN PS24 480W Power Supply - 01677-001

480W DIN rail supply with dual 12/24 VDC for multi-camera systems
- 480W capacity powers multiple Axis IP cameras and NVRs simultaneously
- Dual voltage outputs (12 VDC and 24 VDC) eliminate need for converters
- DIN rail mount fits standard surveillance cabinet enclosures
In stock · Ships same business day

$346.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5507-101

Axis F8211 Pinhole Trim Ring 10 pcs - 5507-101

Pinhole trim rings for covert F1025 sensor deployments, 10-pack
- Pack of 10 units for multi-location surveillance installations
- Flush-mount design hides cameras behind thin wall surfaces
- IP68-rated for wall, ceiling, and recessed mounting points
In stock · Ships same business day

$69.06 $66.99 Save $2.07

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 01631-001

Axis F92A01 Height Strip Housing Silver - 01631-001

Discreet height strip housing for covert pin hole camera mounting
- Silver aluminum construction fits multiple Axis sensor units (F1025, FA1125, F1004, P1264, P1265)
- Includes metric and imperial height strips for flexible measurement and installation
- Compact form factor designed for eye-level surveillance in retail and entrance security
Special Order · Ships in 2-3 weeks

$115.45 $111.99 Save $3.46

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02401-001

Axis Q60-E PTZ Hard-Coated Smoked Dome - 02401-001

Hard-coated smoked dome for Axis Q60-E PTZ cameras
- Hard-coated polycarbonate resists scratches and impact in high-contact areas
- Smoked tint obscures lens direction while maintaining optical clarity
- Designed for Q60-E PTZ series; includes mounting hardware and guide
In stock · Ships same business day

$80.40 $77.99 Save $2.41

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01817-001

Axis Q61 Hydrophilic Clear Dome - 01817-001

Hydrophilic dome for AXIS Q61 IR cameras—water sheets away in rain
- Hydrophilic coating spreads water into thin film, maintaining image clarity during wet conditions
- Self-cleaning action; rain carries away dust and salt spray, reducing manual maintenance
- Clear optical path transmits visible and 850nm IR light without signal loss
In stock · Ships same business day

$190.71 $184.99 Save $5.72

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5505-041

Axis T8353 Microphone Wall Mount Bracket - 5505-041

Clear plastic wall mount bracket for AXIS T8353A microphone
- Compatible with AXIS T8353A microphone for dedicated audio capture
- Mounts on walls, ceilings, and hard surfaces with adjustable positioning
- Clear plastic design stays discreet while quick installation saves setup time
Special Order · Ships in 2-3 weeks

$22.67 $21.99 Save $0.68

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5032-531

Axis T8353A 3.5mm Omnidirectional Microphone - 5032-531

Omnidirectional 3.5mm microphone for Axis cameras and encoders
- 360° omnidirectional pickup captures audio from all directions simultaneously
- Simple 3.5mm jack connection to any compatible Axis network product
- Natural, neutral audio reproduction for accurate incident documentation
In stock · Ships same business day

$509.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 01216-001

Axis T90D25 White LED PoE Illuminator - 01216-001

White-LED PoE illuminator with 4 lens options, 25–110m range
- Four interchangeable lenses (10°–80°) adapt beam width to narrow or wide coverage
- PoE+ powered with no additional cabling; IP66/NEMA 4X for dust and moisture
- IK09 aluminum housing rated –50°C to +50°C for extreme climates
Special Order · Ships in 2-3 weeks

$519.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5503-194

Axis T91A03 DIN Rail Clip B - 5503-194

Steel DIN rail clip for Axis surveillance equipment on 35mm rails
- Mounts Axis cameras and encoders to standard 35mm DIN rail systems
- Steel construction with black finish resists corrosion in industrial setups
- Includes mounting plate and fastening hardware; no additional parts needed
Special Order · Ships in 2-3 weeks

$22.67 $21.99 Save $0.68

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5017-051

Axis T91A05 1.5" NPS Pendant Camera Holder - 5017-051

Pendant mount for 1.5" NPS/NPT pipe with universal tripod socket
- Threads directly onto 1.5" NPS and NPT piping without wall anchors
- Universal 1/4"-20 tripod socket fits most Axis and third-party cameras
- Industrial-grade construction in pendant-drop configuration for overhead mounting
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5507-461

Axis T91B51 Angled Ceiling Mount - 5507-461

Ceiling mount for sloped surfaces up to 45° on parking structures and atriums
- Compensates for angles up to 45° without adapter plates or bracket stacking
- 1.5" NPS thread fits all Axis pendant kits and T91A05 camera holders
- Integrated ball joint allows rotational adjustment and impact absorption post-install
In stock · Ships same business day

$151.54 $146.99 Save $4.55

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5901-301

Axis T94A01C Attachment Kit - 5901-301

Mechanical mount for Q61 + Q6000-E MkII PTZ camera pairing
- Secure attachment integrates AXIS Q61 with Q6000-E MkII for coordinated coverage
- Complete kit includes all hardware needed for multi-camera PTZ deployment
- White form factor maintains camera alignment in large-scale surveillance setups
Special Order · Ships in 2-3 weeks

$132.98 $128.99 Save $3.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01159-001

Axis T94B02D Pendant Kit White 10-Pack - 01159-001

White pendant mounts for Axis dome cameras, 1.5" NPS threaded, 10-pack
- Fits AXIS M20, M31-LV/-LVE, M30-V/-WV, and Companion dome series
- 1.5" NPS threaded pipe compatibility with standard suspended ceiling rods
- White powder-coat finish resists corrosion in indoor institutional settings
In stock · Ships same business day

$250.51 $242.99 Save $7.52

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5901-331

Axis T94J01A Wall Mount for Positioning Cameras - 5901-331

Aluminum wall mount for Axis positioning cameras, indoor/outdoor
- Aluminum construction handles thermal cycling and weather without deflection
- Back, side, or bottom cable entry adapts to your conduit layout
- IK10 impact rating and 3/4" conduit adapter compatibility for rigid installs
In stock · Ships same business day

$233.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5507-601

Axis T94R01B Corner Bracket Mount - 5507-601

Corner bracket mount for fixed dome and bullet cameras
- Powder-coated aluminum construction resists corrosion indoors/outdoors
- Compatible with AXIS T91E61 Wall Mount and small fixed dome cameras
- Standard hole pattern integrates with single gang junction boxes
In stock · Ships same business day

$80.40 $77.99 Save $2.41

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01516-001

Axis T94R01P Wall Mount for D2050-VE - 01516-001

Wall mount for D2050-VE radar with tiltable arm and integrated conduit box
- Tiltable mounting arm adjusts detection angle for optimal perimeter coverage
- Includes T94R01P conduit back box and 260mm cable kit for complete installation
- Weather-resistant construction rated for outdoor perimeter security deployments
In stock · Ships same business day

$151.54 $146.99 Save $4.55

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Axis DIN PS24 480W Power Supply - 01677-001

Axis F8211 Pinhole Trim Ring 10 pcs - 5507-101

Axis F92A01 Height Strip Housing Silver - 01631-001

Axis Q60-E PTZ Hard-Coated Smoked Dome - 02401-001

Axis Q61 Hydrophilic Clear Dome - 01817-001

Axis T8353 Microphone Wall Mount Bracket - 5505-041

Axis T8353A 3.5mm Omnidirectional Microphone - 5032-531

Axis T90D25 White LED PoE Illuminator - 01216-001

Axis T91A03 DIN Rail Clip B - 5503-194

Axis T91A05 1.5" NPS Pendant Camera Holder - 5017-051

Axis T91B51 Angled Ceiling Mount - 5507-461

Axis T94A01C Attachment Kit - 5901-301

Axis T94B02D Pendant Kit White 10-Pack - 01159-001

Axis T94J01A Wall Mount for Positioning Cameras - 5901-331

Axis T94R01B Corner Bracket Mount - 5507-601

Axis T94R01P Wall Mount for D2050-VE - 01516-001

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading