IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QWL506-W

i-PRO WV-QWL506-W Wall Mount Bracket for IP Cameras

White wall bracket with IR-optimized arm for i-PRO IP cameras
- Extended standoff arm eliminates IR reflection for clearer night vision
- Die-cast aluminum with powder-coat white finish rated -50°C to +65°C
- Four-screw mounting distributes load for stable, vibration-resistant installation
In stock · Ships same business day

$187.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QWL506M1-W

i-PRO WV-QWL506M1-W Wall Mount Bracket

Wall mount bracket for i-PRO dome and turret cameras, -50°C to +65°C
- Die-cast aluminum with powder-coated white finish and UV/corrosion resistance
- Extended arm design compatible with concrete, masonry, steel, and wood surfaces
- Outdoor-rated construction maintains stable positioning across temperature extremes
Special Order · Ships in 2-3 weeks

$130.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QWL506S-W

i-PRO WV-QWL506S-W Wall Mount Bracket

White wall mount bracket for i-PRO cameras, -50°C to +65°C rated
- Die-cast aluminum with ISO14993 salt-damage coating for coastal environments
- Four-screw configuration anchors securely to concrete, masonry, steel, or wood
- Optimized lens clearance eliminates IR reflection for clean night vision imaging
Special Order · Ships in 2-3 weeks

$310.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-SDA064G

i-PRO WV-SDA064G 64GB SDXC Memory Card for Surveillance

64GB SDXC card with V10 speed class for 24/7 surveillance recording
- 50 MB/s write speed sustains continuous 1080p capture without frame drops
- 3,000 rewrite cycles rated for round-the-clock duty in -25°C to +85°C range
- 100 MB/s read speed offloads full 64GB card to workstation in ~20 minutes
In stock · Ships same business day

$174.38 $137.99 Save $36.39

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-SDA128G

i-PRO WV-SDA128G 128GB SDXC Memory Card for Surveillance

128GB SDXC card with V30 speed class for continuous surveillance recording
- V30 Video Speed Class guarantees 30 MB/s sustained write for uninterrupted 24/7 recording
- 50 MB/s write speed handles 1080p and higher resolutions without frame drops
- 128GB capacity stores 4–8 weeks of continuous HD video for local edge storage
In stock · Ships same business day

$292.15 $230.99 Save $61.16

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-SDA256G

i-PRO WV-SDA256G 256GB SDXC Memory Card

256GB microSD for i-PRO cameras, rated for continuous 24/7 surveillance
- 256GB capacity with industrial-grade endurance for nonstop recording cycles
- Operates -25°C to +85°C in harsh environments without performance loss
- HTTPS encryption support safeguards recorded footage during transmission
Special Order · Ships in 2-3 weeks

$531.99 $419.99 Save $112.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-SDA512G

i-PRO WV-SDA512G 512GB Industrial SDXC Memory Card

512GB industrial SDXC for 24/7 surveillance loop recording
- 512GB capacity supports 14–30 days continuous 4K recording per camera
- Industrial-rated endurance for continuous FIFO loop writes, not consumer cards
- Operates -25°C to +85°C with HTTPS encryption for i-PRO cameras
In stock · Ships same business day

$973.51 $767.99 Save $205.52

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-SDB032G

i-PRO WV-SDB032G 32GB microSDHC Memory Card for Surveillance

32GB microSDHC for i-PRO cameras; Class 10/U1/V10 surveillance storage
- 50 MB/s write speed sustains 24/7 recording without thermal throttling
- 100 MB/s read, 3,000 P/E cycles rated for 150–300 TB total writes
- Operates -25°C to +85°C; 3D TLC NAND built for indoor and outdoor use
In stock · Ships same business day

$105.76 $83.99 Save $21.77

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-SDB064G

i-PRO WV-SDB064G 64GB microSDXC Memory Card

64GB microSDXC for i-PRO cameras—local edge recording without network dependency
- Class 10, U1, V10 with 50 MB/s write speed handles continuous video without frame drops
- 100 MB/s read speed for quick footage offload during incident review and investigation
- Operates -25°C to +85°C; 3D TLC NAND rated for 3,000 rewrite cycles in outdoor deployments
In stock · Ships same business day

$162.32 $127.99 Save $34.33

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-SDB128G

i-PRO WV-SDB128G 128GB microSDXC Memory Card

128GB microSDXC for i-PRO cameras with V30 write speed and -25°C to +85°C range
- V30 video speed class maintains 30 MB/s write for uninterrupted surveillance recording
- 3000 rewrite cycle endurance rating supports continuous 24/7 camera operation
- UHS U3 with 100 MB/s read / 50 MB/s write speeds for reliable data transfer
Special Order · Ships in 2-3 weeks

$279.97 $220.99 Save $58.98

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-SDB256G

i-PRO WV-SDB256G 256GB microSDXC Memory Card

256GB microSDXC for i-PRO surveillance cameras with 24/7 recording
- Industrial-grade endurance rated for continuous 24/7 video recording
- Operates -25°C to +85°C in extreme temperature environments
- Surveillance-tuned sustained writes prevent frame drops on edge storage
Special Order · Ships in 2-3 weeks

$518.03 $408.99 Save $109.04

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-SUD6FRL1

i-PRO WV-SUD6FRL1 Natural Silver IR LED Unit

External IR LED unit for i-PRO WV-SUD638 with 150m range
- 150-meter infrared illumination for low-light perimeter surveillance
- PoE powered with IP67/NEMA 4X and IK10 vandal resistance
- Natural Silver LED with infrared-only operation, no visible light
Special Order · Ships in 2-3 weeks

$1,501.21 $1,183.99 Save $317.22

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WVCW6SA

i-PRO WVCW6SA Smoke Dome Cover

Smoke dome cover with IK10 vandal protection and IP66 sealing
- UV-stabilized polycarbonate maintains H.264 video quality while concealing lens
- IK10 impact rated construction withstands harsh environments and vandalism attempts
- IP66 and NEMA 4X sealing protects optical assembly from dust and moisture
Special Order · Ships in 2-3 weeks

$21.99

Add to Cart
The item has been added
Compare

Out of stock
Kantech

SKU: KT-4-MOD-WIFI

Kantech KT-4-MOD-WIFI Access Control WiFi Module

WiFi expansion module for KT-4 access control systems
- Direct integration with existing KT-4 hardware; no core system replacement needed
- Compatible with Entrapass v8+ VMS for remote management and monitoring
- Eliminates hardwired network runs in retrofit and difficult-to-wire installations
Special Order · Ships in 2-3 weeks

$271.00 $200.99 Save $70.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Kantech

SKU: KT-PS4085

Kantech KT-PS4085 12VDC 1.5A Power Supply

12VDC 1.5A regulated supply for distributed access control systems
- 12VDC regulated output at 1.5A maintains stable voltage across long cable runs
- 16.5 VAC 40 VA transformer input fits retrofit installations with existing power
- Compatible with 12V 7Ah battery backup for uninterrupted access during outages
In stock · Ships same business day

$120.00 $118.99 Save $1.01

Add to Cart
The item has been added
Compare

Out of stock
Kantech

SKU: KTES-PS-NA

Kantech KTES-PS-NA 19VDC 3.15A Power Supply

19VDC 3.15A regulated power supply for Kantech access control
- 59.85W output powers KTES-US and KTES-CDN control modules
- 100–240V AC input handles global voltage standards without adapters
- Compact unit mounts in control panels with included 3-pin power cord
Special Order · Ships in 2-3 weeks

$244.00 $180.99 Save $63.01

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

i-PRO WV-QWL506-W Wall Mount Bracket for IP Cameras

i-PRO WV-QWL506M1-W Wall Mount Bracket

i-PRO WV-QWL506S-W Wall Mount Bracket

i-PRO WV-SDA064G 64GB SDXC Memory Card for Surveillance

i-PRO WV-SDA128G 128GB SDXC Memory Card for Surveillance

i-PRO WV-SDA256G 256GB SDXC Memory Card

i-PRO WV-SDA512G 512GB Industrial SDXC Memory Card

i-PRO WV-SDB032G 32GB microSDHC Memory Card for Surveillance

i-PRO WV-SDB064G 64GB microSDXC Memory Card

i-PRO WV-SDB128G 128GB microSDXC Memory Card

i-PRO WV-SDB256G 256GB microSDXC Memory Card

i-PRO WV-SUD6FRL1 Natural Silver IR LED Unit

i-PRO WVCW6SA Smoke Dome Cover

Kantech KT-4-MOD-WIFI Access Control WiFi Module

Kantech KT-PS4085 12VDC 1.5A Power Supply

Kantech KTES-PS-NA 19VDC 3.15A Power Supply

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service