IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
i-PRO

SKU: WV-QCN500S-W

i-PRO WV-QCN500S-W Corner Mount Bracket

90-degree corner bracket for i-PRO cameras in tight spaces
- Dual-surface aluminum mount distributes weight across both walls
- ISO 14993 salt-damage prevention rated for coastal environments
- Operates -50°C to +60°C with corrosion-resistant powder coating
Special Order · Ships in 2-3 weeks

$200.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QDC100C-W

i-PRO WV-QDC100C-W Clear Dome Cover

Clear dome cover with anti-reflective coating for i-PRO cameras
- UV-stabilized polycarbonate resists yellowing and brittleness for 7–10 years
- Anti-reflective coating reduces glare and improves contrast in bright scenes
- IP66 environmental sealing protects camera optics across −10°C to +55°C range
In stock · Ships same business day

$163.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QDC101C

i-PRO WV-QDC101C Clear Dome Cover

Clear dome cover for i-PRO network cameras, -30°C to +50°C rated
- UV-stabilized polycarbonate with anti-reflective coating preserves image clarity
- IR compatible with no optical degradation for night vision performance
- Hook-mounted design fits i-PRO dome cameras with straightforward installation
Special Order · Ships in 2-3 weeks

$29.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QDC102C

i-PRO WV-QDC102C Clear Dome Cover for S6130

Clear dome cover for i-PRO S6130 with UV-stabilized optics
- UV-stabilized polycarbonate resists yellowing over years of outdoor use
- Anti-reflective coating maximizes light transmission for consistent image clarity
- Tool-free installation protects optical assembly from dust and moisture
Special Order · Ships in 2-3 weeks

$48.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QDC200C

i-PRO WV-QDC200C Clear Dome Cover

Clear dome cover for i-PRO network cameras with UV and dust protection
- UV-stabilized polycarbonate resists yellowing and maintains optical clarity
- Anti-reflective coating reduces glare and internal reflections for image quality
- Dust and moisture sealed design with tool-free installation
Special Order · Ships in 2-3 weeks

$72.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QDC500S

i-PRO WV-QDC500S Smoke Dome Cover

Smoke dome cover for i-PRO cameras with IR and WDR
- Shields lens and body from dust, debris, and environmental contaminants
- Ceiling-mount dome form factor compatible with built-in IR cameras
- Smoke-tinted design maintains sight lines while protecting optics
Special Order · Ships in 2-3 weeks

$58.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QDC501C

i-PRO WV-QDC501C Clear Dome Cover

Clear dome cover for i-PRO cameras, indoor/outdoor with IR night vision
- Clear optical polycarbonate preserves video quality and camera field of view
- IR-compatible design supports night vision surveillance in low-light conditions
- Direct replacement accessory for i-PRO dome camera systems with HTTPS encryption
Special Order · Ships in 2-3 weeks

$131.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QDC501G

i-PRO WV-QDC501G Smoke Dome Cover

Smoke dome cover with IR night vision for discrete i-PRO installations
- Infrared-enabled night vision maintains 24/7 surveillance in low-light conditions
- Smoke-tinted optics integrate discreetly while shielding from dust and environment
- HTTPS encryption secures video feeds across your network infrastructure
Special Order · Ships in 2-3 weeks

$132.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QDC502C

i-PRO WV-QDC502C Clear Dome Cover

Clear polycarbonate dome cover for i-PRO cameras with environmental protection
- Clear polycarbonate construction maintains optical clarity while blocking dust and debris
- Compatible with i-PRO dome camera models and supports WDR functionality
- Outdoor-rated protection extends camera lifespan in harsh indoor and outdoor environments
Special Order · Ships in 2-3 weeks

$116.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QDC502G

i-PRO WV-QDC502G Smoke Dome Cover

Smoke dome cover for i-PRO cameras in harsh environments
- Mitigates smoke, steam, and particulate buildup on lens surfaces
- Compatible with i-PRO WDR-enabled dome cameras for high-contrast scenes
- White dome form factor with HTTPS encryption support for secure deployment
In stock · Ships same business day

$397.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QDC504C

i-PRO WV-QDC504C Clear Dome Cover for S25XX/X25XX

Clear polycarbonate dome cover for i-PRO S25XX/X25XX cameras
- 42 mm optically clear polycarbonate dome maintains video quality without distortion
- Operates -50°C to +60°C for arctic to desert deployments
- Lightweight 74 g design protects optics from dust, moisture, and impact
Special Order · Ships in 2-3 weeks

$72.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QDC505C

i-PRO WV-QDC505C Clear Dome Cover

Clear dome cover for i-PRO network cameras, -30°C to +50°C rated
- UV-stabilized polycarbonate with anti-reflective coating maintains clarity
- Tool-free installation seals against dust, moisture, and contaminants
- Precision-molded construction preserves full image quality and light transmission
Special Order · Ships in 2-3 weeks

$24.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QDC508C

i-PRO WV-QDC508C Clear Dome Cover

Optical-grade dome cover for i-PRO cameras, -50°C to +60°C
- UV-stabilized polycarbonate resists yellowing and hazing over time
- Anti-reflective coating minimizes glare and internal reflections
- Tool-free installation for quick field replacement and maintenance
Special Order · Ships in 2-3 weeks

$267.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QDC508CN

i-PRO WV-QDC508CN Clear Dome Cover with ClearSight Coating

Clear dome replacement with anti-glare and water-repellent coating for S66XX/X66XX
- ClearSight dual coating cuts glare and beads water away in rain or high humidity
- Optical-grade polycarbonate precision-molded for S66XX and X66XX fixed dome cameras
- Rated -50°C to +60°C; mounts on ceiling or wall in outdoor environments
In stock · Ships same business day

$242.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QDC509CN

i-PRO WV-QDC509CN Clear Sight Dome Cover

Clear replacement dome cover for i-PRO network cameras with UV protection
- Anti-reflective polycarbonate construction maximizes light transmission and image clarity
- UV-stabilized material resists yellowing; environmental sealing blocks dust and moisture
- Tool-free installation design for quick replacement on compatible i-PRO dome models
Special Order · Ships in 2-3 weeks

$151.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QED100C-W

i-PRO WV-QED100C-W Clear Embedded Ceiling Mount Bracket

Recessed ceiling bracket with clear dome housing for discrete i-PRO camera integration
- Flush-mount embedded design keeps cabling and connectors concealed within ceiling cavity
- Compatible with i-PRO dome and turret models supporting audio, night vision, and day/night
- White housing rated for indoor commercial environments with standard HVAC temperature and humidity
In stock · Ships same business day

$285.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

i-PRO WV-QCN500S-W Corner Mount Bracket

i-PRO WV-QDC100C-W Clear Dome Cover

i-PRO WV-QDC101C Clear Dome Cover

i-PRO WV-QDC102C Clear Dome Cover for S6130

i-PRO WV-QDC200C Clear Dome Cover

i-PRO WV-QDC500S Smoke Dome Cover

i-PRO WV-QDC501C Clear Dome Cover

i-PRO WV-QDC501G Smoke Dome Cover

i-PRO WV-QDC502C Clear Dome Cover

i-PRO WV-QDC502G Smoke Dome Cover

i-PRO WV-QDC504C Clear Dome Cover for S25XX/X25XX

i-PRO WV-QDC505C Clear Dome Cover

i-PRO WV-QDC508C Clear Dome Cover

i-PRO WV-QDC508CN Clear Dome Cover with ClearSight Coating

i-PRO WV-QDC509CN Clear Sight Dome Cover

i-PRO WV-QED100C-W Clear Embedded Ceiling Mount Bracket

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service