IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
i-PRO

SKU: M-PTZ-CNR

i-PRO M-PTZ-CNR PTZ Dome Corner Mount

90-degree corner mount for i-PRO PTZ domes with dual-wall stability
- Aluminum bracket with powder coat finish and dual-surface attachment for load distribution
- Optimizes PTZ camera positioning at wall junctions for corridor and hallway coverage
- 4.12 lbs with enhanced pull-out resistance for outdoor and high-security installations
Special Order · Ships in 2-3 weeks

$39.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: M-PTZ-JB

i-PRO M-PTZ-JB PTZ Junction Box

Aluminum junction box for PTZ camera cable management, indoor/outdoor
- 12-inch aluminum alloy resists corrosion in outdoor and harsh environments
- Compact 11.7" × 9.6" × 5" footprint fits tight installation spaces
- 5.51 lbs lightweight design minimizes load on camera mounts
In stock · Ships same business day

$228.10 $172.99 Save $55.11

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: M-PTZ-PENDANT

i-PRO M-PTZ-PENDANT Aluminum PTZ Dome Mount

Aluminum pendant mount for PTZ domes in obstructed ceiling spaces
- 1.48 lbs aluminum alloy construction minimizes structural load on ceilings
- Internal cable routing for power and network keeps wiring concealed
- Corrosion-resistant finish rated for indoor and covered outdoor use
In stock · Ships same business day

$46.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: M-PTZ-PENDANT-EX-L

i-PRO M-PTZ-PENDANT-EX-L PTZ Dome Pendant Mount Extension

Aluminum pendant extension tube for high-ceiling PTZ dome mounting
- Extends vertical drop distance for PTZ cameras in warehouses and atriums
- Internal cable routing protects power and network lines from weather damage
- Lightweight 2.05 lb aluminum alloy resists corrosion indoors and outdoors
In stock · Ships same business day

$46.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: M-PTZ-PM

i-PRO M-PTZ-PM Pole Mount Adapter

Pole mount adapter for PTZ domes; die-cast aluminum, round/square posts
- Die-cast aluminum with powder coating resists corrosion and UV degradation
- Optimal lens clearance prevents IR reflection during night operation
- Even weight distribution eliminates drift on vertical pole installations
In stock · Ships same business day

$44.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: M-PTZ-WM

i-PRO M-PTZ-WM PTZ Dome Wall Mount Bracket

Wall bracket for i-PRO PTZ domes with offset mount for IR clarity
- Die-cast aluminum with powder-coated white finish resists UV and salt spray
- Offset design prevents IR reflection washout on exterior wall installations
- Mounts to concrete, masonry, steel, and wood-frame substrates; 1.74 lbs
In stock · Ships same business day

$44.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: M-WM-JB-MINI-V2

i-PRO M-WM-JB-MINI-V2 Wall Mount with Junction Box

Wall mount with integrated junction box for i-PRO dome cameras
- Die-cast aluminum with powder-coat white finish resists corrosion outdoors
- Built-in junction box consolidates power and signal connections at mount
- Anchors to concrete, masonry, steel, and wood-frame surfaces without adapters
In stock · Ships same business day

$71.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: M-WM-T-V2

i-PRO M-WM-T-V2 Fixed Dome Wall Mount

Die-cast aluminum wall mount for i-PRO dome cameras
- Powder-coated aluminum resists corrosion and UV degradation outdoors
- Mounts to concrete, masonry, steel, and wood-frame construction
- Extended arm maintains lens clearance and IR performance at 1.85 lbs
Special Order · Ships in 2-3 weeks

$75.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: MC-MT15

i-PRO MC-MT15 Wall Mount Bracket for Multi-Technology Reader

Die-cast aluminum wall and pole mount for i-PRO readers
- UV and corrosion-resistant powder-coat finish for outdoor use
- Wall and pole configurations with included pole-mount adapter
- Compatible with concrete, masonry, steel, and wood surfaces
Special Order · Ships in 2-3 weeks

$420.00 $360.99 Save $59.01

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: MOBOTIX-S16-BUNDLE

i-PRO MOBOTIX S16 Bundle Kit with Flex Cable

Modular 6MP camera kit with flex optical cable for custom integrations
- Interchangeable lens and sensor modules let you configure for retail, access control, or perimeter monitoring
- PoE powered with flexible optical cable included for installations in tight or congested spaces
- IP66 rated with wall/ceiling mount options and ONVIF compliance for standard VMS systems
Special Order · Ships in 2-3 weeks

$1,068.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: MR-BAT-8C

i-PRO MR-BAT-8C Battery Backup Unit for MR-8C

Battery backup for i-PRO MR-8C mobile NVR during power sags and engine cranking
- Seamless power transition protects against voltage drops and recording interruptions
- Runtime allows controlled shutdown to prevent video buffer loss and database corruption
- Mounting kit included for secure installation in vehicle surveillance systems
Special Order · Ships in 2-3 weeks

$1,800.00 $1,418.99 Save $381.01

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: MR-POWER-5P

i-PRO MR-POWER-5P 120W AC Adaptor

120W AC adaptor with 5-pin Phoenix connector for i-PRO MR-8C NVRs
- 120W DC output supports dual network video recorder operation
- 5-pin Phoenix connector prevents accidental disconnection in field deployments
- AC input compatible with standard North American power infrastructure
Special Order · Ships in 2-3 weeks

$160.00 $126.99 Save $33.01

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: PPRM35AW B1

i-PRO PPRM35AW B1 Parapet Mount

Parapet mount for roofline camera installation with 1-1/2 NPT thread
- 1-1/2 NPT ANSI male thread connection secures i-PRO WV-QSR5XXF1 series
- Weather-resistant design rated for permanent outdoor roofline deployment
- B stock availability for cost-effective elevated surface surveillance setups
Special Order · Ships in 2-3 weeks

$470.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: PPRM35AW B2

i-PRO PPRM35AW B2 Parapet Mount

Parapet mount for rooftop surveillance on WV-QSR5XXF1 series cameras
- 1-1/2 NPT ANSI male thread connection for standard camera interfaces
- Outdoor-rated white mount designed for elevated rooftop and wall-edge positioning
- B stock condition—fully functional and ready to deploy
Special Order · Ships in 2-3 weeks

$470.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: PPRM35AW

i-PRO PPRM35AW White Parapet Mount Bracket

White parapet wall mount bracket for rooftop camera installations
- 22 lb outdoor-rated steel construction resists wind load and thermal cycling
- White powder coat finish dissipates heat, reducing thermal drift on exposed roofs
- Purpose-built for i-PRO surveillance cameras on building-edge perimeter walls
In stock · Ships same business day

$684.81 $539.99 Save $144.82

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: PUM9

i-PRO PUM9 Silver Ceiling and Wall Mount Bracket

Silver ceiling and wall mount bracket for i-PRO cameras
- Dual mounting flexibility supports both ceiling and wall installation
- Corrosion-resistant silver finish with rigid mechanical support structure
- Rated IK10 impact resistance for stable indoor surveillance deployment
Special Order · Ships in 2-3 weeks

$20.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

i-PRO M-PTZ-CNR PTZ Dome Corner Mount

i-PRO M-PTZ-JB PTZ Junction Box

i-PRO M-PTZ-PENDANT Aluminum PTZ Dome Mount

i-PRO M-PTZ-PENDANT-EX-L PTZ Dome Pendant Mount Extension

i-PRO M-PTZ-PM Pole Mount Adapter

i-PRO M-PTZ-WM PTZ Dome Wall Mount Bracket

i-PRO M-WM-JB-MINI-V2 Wall Mount with Junction Box

i-PRO M-WM-T-V2 Fixed Dome Wall Mount

i-PRO MC-MT15 Wall Mount Bracket for Multi-Technology Reader

i-PRO MOBOTIX S16 Bundle Kit with Flex Cable

i-PRO MR-BAT-8C Battery Backup Unit for MR-8C

i-PRO MR-POWER-5P 120W AC Adaptor

i-PRO PPRM35AW B1 Parapet Mount

i-PRO PPRM35AW B2 Parapet Mount

i-PRO PPRM35AW White Parapet Mount Bracket

i-PRO PUM9 Silver Ceiling and Wall Mount Bracket

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading