i-PRO MOBOTIX S16 Bundle Kit with Flex Cable

i-PRO MOBOTIX-S16-BUNDLE Modular Camera Bundle Kit with Flex Cable

Overview

The MOBOTIX-S16-BUNDLE pairs the MX-S16B modular camera platform with the MX-FLEX-OPT-CBL-3 flexible optical cable—a purpose-built kit for integrators deploying customized surveillance in constrained installations. The S16 platform supports interchangeable lens and sensor modules, allowing you to match optics and imaging profiles to specific site requirements without redesigning the entire deployment. PoE (802.3af, Class 3) powers the camera from standard network infrastructure, eliminating separate 12V runs. The flex cable accommodates tight corner bends and difficult-to-route pathways where rigid conduit or standard Ethernet creates installation friction. This is not a plug-and-play camera—it's a modular platform intended for system integrators who need to configure lens, sensor type, and analytics at commission time.

Compatibility

The MOBOTIX-S16-BUNDLE integrates with ONVIF-compliant VMS platforms (Milestone, Genetec, Axis Camera Station, and equivalents) for centralized management and multi-site scaling. The modular architecture supports lens modules and sensor configurations—confirm your specific lens and thermal or standard-sensor choice with the integrator configuration guide before ordering. The flex cable connects the camera head to network PoE switches via standard RJ-45 termination; verify your switch PoE budget supports Class 3 draw (up to 13W typical). Compatible with wall and ceiling mounts; verify bracket load rating for your final sensor and lens assembly weight.

Installation Notes

The MX-FLEX-OPT-CBL-3 flexible optical cable allows bends down to the cable's rated minimum radius—confirm the exact bend limit in the product documentation before routing through tight spaces. PoE power delivery via 802.3af requires a compliant switch port; non-PoE or power-limited switches will not activate the camera. Ensure your VMS supports ONVIF Profile S or equivalent for full feature set; older or proprietary-only systems may require adapter firmware. Wall or ceiling mounting requires appropriate brackets and fastening—not included in the bundle.