IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Hanwha

SKU: SCL-30

Hanwha SCL-30 3M Extension Cable Remote Head Lens

3-meter remote head lens extension cable for PNM-9000QB and XNB-6002
- Separates lens and camera body up to 3 meters without signal loss
- Plug-and-play installation; no configuration or additional hardware needed
- Works indoors and secure outdoor environments; IP66 and IK10 rated
In stock · Ships same business day

$95.00 $63.99 Save $31.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SHB-4200

Hanwha SHB-4200 Indoor/Outdoor Fixed Camera Housing

IP66 aluminum housing for fixed cameras indoors and outdoors
- IP66 weather sealing blocks dust and water ingress in harsh conditions
- Aluminum construction with corrosion resistance for long-term outdoor use
- Universal compatibility works with various surveillance camera models
Special Order · Ships in 2-3 weeks

$90.00 $60.99 Save $29.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SHB-4200H

Hanwha SHB-4200H IP66 Fixed Camera Housing with Climate Control

IP66 aluminum housing with integrated heater/blower for outdoor cameras
- IP66 weatherproofing shields cameras from dust, rain, and salt spray
- Aluminum construction resists corrosion in coastal and industrial settings
- Integrated climate control maintains sensor performance across temperature extremes
In stock · Ships same business day

$140.00 $93.99 Save $46.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SHB-4300H1

Hanwha SHB-4300H1 Indoor/Outdoor Fixed Camera Housing

IP66 aluminum fixed housing rated -58°F to +122°F for indoor/outdoor
- IP66 sealed design blocks dust and water in harsh outdoor conditions
- Aluminum construction withstands extreme temperatures from arctic to tropical
- Fixed mounting accommodates multiple camera models with simple installation
Special Order · Ships in 2-3 weeks

$349.00 $234.99 Save $114.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SHB-4301HP

Hanwha SHB-4301HP Indoor/Outdoor Camera Housing

IP66 aluminum housing with PoE+ and thermal management for outdoor cameras
- IP66 protection against dust and water for exposed outdoor installations
- Integrated heater, blower, and defroster prevent fogging in extreme temperatures
- PoE+ powered via Ethernet—no separate power supply required
Special Order · Ships in 2-3 weeks

$450.00 $301.99 Save $148.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SHB-9000H

Hanwha SHB-9000H Indoor/Outdoor Fixed Camera Housing

IP66 aluminum housing with thermal control for outdoor surveillance
- IP66 rated—blocks dust and water jets for roofline and perimeter mounting
- Thermostat fan + integrated heater prevent lens condensation year-round
- Tool-free mounting and neutral finish fit Hanwha and third-party cameras
In stock · Ships same business day

$2,925.00 $1,961.99 Save $963.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SHB-V-3200HPR

Hanwha SHB-V-3200HPR Aluminum Camera Housing

IP66 aluminum housing with IK10 impact resistance for coastal surveillance
- Integrated 6W IR illuminator and 5W demisting fan for -10°C to +60°C operation
- Salt fog tested to 1000 hours; PoE Class 3 (12.95W) with flexible power distribution
- 118×75mm clear glass window and side-opening design for quick camera installation
Special Order · Ships in 2-3 weeks

$1,100.00 $712.99 Save $387.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SHB-V-DBHWGC

Hanwha SHB-V-DBHWGC Pole Mount

Steel pole mount for 210–225mm poles with 25kg load capacity
- Fits standard poles 210–225mm diameter (8.3–8.8in) with 25kg static load
- Steel construction with corrosion resistance for outdoor deployments
- Lightweight 1.2kg design minimizes stress on pole structure
Special Order · Ships in 2-3 weeks

$200.00 $129.99 Save $70.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SHB-V-WCPA

Hanwha SHB-V-WCPA Conduit Adapter Plate

Die-cast aluminum conduit adapter for Hanwha dome, bullet, and PTZ cameras
- TR20 screw mount works with SHB-V-DBHWGC pole mounts and SHB-V-3200HPR enclosures
- Lightweight 450g aluminum construction resists corrosion in outdoor installations
- White finish integrates discreetly with conduit-based surveillance infrastructure
Special Order · Ships in 2-3 weeks

$80.00 $53.99 Save $26.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SHD-1100FPW

Hanwha SHD-1100FPW Plenum In-Ceiling Mount

Plenum-rated flush ceiling mount for Hanwha 5MP domes
- Fits 10–70 mm suspended ceiling tiles with 1.5 kg load capacity
- Polycarbonate and aluminum construction in RAL 9003 white finish
- Compatible with QND-C8013R and QND-C8023R dome cameras
In stock · Ships same business day

$100.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SHD-1100FW

Hanwha SHD-1100FW In-Ceiling Mount

Flush in-ceiling mount for Hanwha mini dome cameras, 10–60mm tiles
- Polycarbonate white housing integrates seamlessly into suspended ceilings
- Compatible with QNV-C8011R, QNV-C8012, QNV-C9011R mini vandal domes
- Supports 0.6kg camera load with 3kg maximum ceiling board capacity
Special Order · Ships in 2-3 weeks

$80.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SHD-1101FW

Hanwha SHD-1101FW In-Ceiling Mount

Flush in-ceiling mount for Hanwha dome cameras, supports 10–60 mm ceilings
- Compatible with QND-C8013R and QND-C8023R dome cameras
- White polycarbonate construction fits standard drywall and suspended ceilings
- Ø140 mm ceiling hole with 0.6 kg camera load capacity
Special Order · Ships in 2-3 weeks

$80.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SHD-1198FW

Hanwha SHD-1198FW Ceiling Flush Mount

White ceiling flush mount for 9 Hanwha HCD and QND cameras
- Low-profile polycarbonate design sits flush with ceiling surface
- Compatible with HCD-7070R, HCD-6080R, QND-6070R, QND-7080R, and 5 others
- Complete mounting hardware included for straightforward installation
In stock · Ships same business day

$79.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SHD-1200FPW

Hanwha SHD-1200FPW Plenum Flush Mount

Flush-mount ceiling bracket for Hanwha turrets, ø160mm opening
- Aluminum body with white powder coat fits drop ceilings 10–70mm thick
- Compatible with QNV-C8011R, QNV-C9011R, and QNV-C8012 cameras
- M20 and M25 conduit options for flexible wiring configurations
In stock · Ships same business day

$76.00 $56.99 Save $19.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SHD-1200FW

Hanwha SHD-1200FW In-Ceiling Flush Mount

Flush ceiling mount for Hanwha QNV-C8013R/C8023R 5MP domes
- ø140 mm hole fits standard tile and drywall up to 60 mm thick
- White polycarbonate construction blends with ceiling finishes
- Supports up to 0.6 kg camera load with 3 kg ceiling capacity
Special Order · Ships in 2-3 weeks

$80.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SHD-1201FPW

Hanwha SHD-1201FPW Plenum In-Ceiling Mount

Plenum-rated flush in-ceiling mount for drop-ceiling camera installations
- Fits tile thickness 10–70 mm with 2 kg camera load capacity
- Dual conduit holes (½" M20 and ¾" M25) for flexible cable routing
- Compatible with QNV-C8013R and QNV-C8023R vandal dome cameras
Special Order · Ships in 2-3 weeks

$100.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Hanwha SCL-30 3M Extension Cable Remote Head Lens

Hanwha SHB-4200 Indoor/Outdoor Fixed Camera Housing

Hanwha SHB-4200H IP66 Fixed Camera Housing with Climate Control

Hanwha SHB-4300H1 Indoor/Outdoor Fixed Camera Housing

Hanwha SHB-4301HP Indoor/Outdoor Camera Housing

Hanwha SHB-9000H Indoor/Outdoor Fixed Camera Housing

Hanwha SHB-V-3200HPR Aluminum Camera Housing

Hanwha SHB-V-DBHWGC Pole Mount

Hanwha SHB-V-WCPA Conduit Adapter Plate

Hanwha SHD-1100FPW Plenum In-Ceiling Mount

Hanwha SHD-1100FW In-Ceiling Mount

Hanwha SHD-1101FW In-Ceiling Mount

Hanwha SHD-1198FW Ceiling Flush Mount

Hanwha SHD-1200FPW Plenum Flush Mount

Hanwha SHD-1200FW In-Ceiling Flush Mount

Hanwha SHD-1201FPW Plenum In-Ceiling Mount

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading