Camden

SKU: CV-7600

Camden CV-7600 MIFARE Reader with BLE Smartphone Credentials

• Reads DESFire, MIFARE, HID, and NFC/13.56 MHz cards for phased credential migration.
• BLE smartphone credential support reduces physical card issuance and replacement overhead.
• Dual OSDP and Wiegand output ensures compatibility with modern and legacy access controllers.

Camden

SKU: CV-7820

Camden CV-7820 Proximity Reader Single Gang

Single gang 125kHz proximity reader with 8-inch read range

• 8-inch read range fits standard door access control installations
• OSDP and Wiegand protocols integrate with existing access systems
• 16VDC operation in single gang form factor for retrofit deployments

Camden

SKU: CV-CSE-B

Camden CV-CSE-B 125kHz Proximity Card Reader (100-Pack)

• Dual OSDP/Wiegand output integrates with legacy and modern access control panels.
• Supports up to 250,000 users and 4 doors, scaling to enterprise facility deployments.
• 100-unit bulk pack at 16VDC simplifies large rollouts using standard commercial power supplies.

Camden

SKU: CV-ISH-B

Camden CV-ISH-B HID Format ISO Proximity Card Reader

• Supports up to 250,000 credentials, scaling across multi-facility enterprise deployments.
• OSDP and Wiegand outputs integrate with both legacy panels and modern networked controllers.
• Single reader manages up to 4 door strike circuits, reducing interface hardware requirements.

Camden

SKU: CV-KTA

Camden CV-KTA 125kHz Proximity Key Tag (25-Pack)

• AWID-format encoding ensures compatibility with HID and HID-compatible 125kHz readers.
• Passive operation eliminates batteries, reducing credential lifecycle overhead at scale.
• 25-pack bulk quantity covers a typical departmental rollout in a single procurement order.

Camden

SKU: CV-KTE

Camden CV-KTE 125kHz Proximity Tag (25-Pack)

• 125kHz HID-standard format works with installed North American reader bases—no firmware changes.
• Dual Wiegand and OSDP support lets one credential stock serve legacy and modern panels alike.
• Passive, read-only tags need zero battery maintenance and resist UID reprogramming attacks.

Camden

SKU: CV-KTH

Camden CV-KTH HID Proximity Reader Tag (25-Pack)

• 125kHz HID-format credential works with legacy and current proximity readers, no replacement needed.
• Dual OSDP and Wiegand support lets these tags integrate into mixed-protocol access control panels.
• 25-unit bulk pack at 16VDC simplifies mid-scale deployments across 10–15 doors on existing wiring.

Camden

SKU: CV-WRX4

Camden CV-WRX4 Four Channel Wiegand Receiver

• Supports four independent Wiegand channels, eliminating extra multiplexing hardware.
• DIP-switch selectable Wiegand 26 or 37 per channel enables mixed-protocol deployments.
• 9–21VDC input at 14mA idle fits battery-backed and PoE-adjacent power budgets.

Camden

SKU: CV-WTX2

Camden CV-WTX2 Two-Button Proximity Key Fob Reader

• Dual OSDP and Wiegand output eliminates protocol translators on mixed-controller deployments.
• HID 125kHz prox support preserves existing card and fob credential bases during retrofits.
• 16VDC operation and wall/rack mounting options fit standard reader runs without recabling.

Camden

SKU: CV-WTX2-H26

Camden CV-WTX2-H26 Two-Channel Wiegand Proximity Reader

• Dual Wiegand and OSDP outputs let one device serve both legacy and modern controllers.
• Reads HID 125kHz and AWID 34-bit credentials, preserving existing card and key tag stock.
• Two-channel architecture cuts panel port usage and simplifies wiring in multi-door clusters.

Camden

SKU: CV-WTX2H

Camden CV-WTX2H Two Channel Wiegand Proximity Reader

Dual-channel 125kHz proximity reader with Wiegand and OSDP output

• Two independent reader channels for multi-door access control setups
• Reads HID 125kHz proximity cards and fobs on 16VDC power
• Wiegand and OSDP protocol support for retrofit and new installations

Camden

SKU: CV-WTX2H-H26

Camden CV-WTX2H-H26 Dual-Channel Wiegand Proximity Reader

• Dual Wiegand/OSDP outputs let one reader serve legacy and modern panels simultaneously.
• IP67-rated housing and −35°C to +66°C range support outdoor and harsh-environment installs.
• Reads HID 37-bit and AWID 34-bit 125kHz credentials, preserving existing card ecosystems.

Camden

SKU: CV-WTX4H

Camden CV-WTX4H Four Channel Wiegand Key Fob Reader

Four-channel 125kHz proximity reader with Wiegand and OSDP output

• Four independent channels handle multiple credential streams or door zones
• HID 125kHz proximity credentials with Wiegand + OSDP protocol support
• Panel or surface mount at 16VDC for retrofit and new installations

Camden

SKU: CV-WTX4H-H26

Camden CV-WTX4H-H26 Four Channel Wiegand Proximity Reader

Four-channel proximity reader for multi-door access control systems

• Four independent channels support simultaneous multi-door deployment
• OSDP and Wiegand protocols integrate with existing access control systems
• Reads HID 125kHz proximity credentials at 16VDC operation

Camden

SKU: CV-WTX4H-H26SE

Camden CV-WTX4H-H26SE Four-Channel Wiegand Proximity Reader

Four-channel proximity reader for Wiegand and OSDP access control

• Reads 125kHz HID proximity cards and HID iCLASS SE smart cards
• Dual protocol output via Wiegand and OSDP for system integration
• Operates at 16VDC for standard power infrastructure compatibility

Camden

SKU: CX-1000/74

Camden CX-1000/74 Electric Strike Lock

Network electric strike, 24VDC fail-secure, TCP/IP control

• TCP/IP integration for centralized access control across multiple doors
• Fail-secure locking mode holds strike in locked position during power loss
• 24VDC operation with wall, ceiling, or pole mount for flexible installation