Access Control
Sub categories
Showing Results for Access Control
-
Lifesafety Power
SKU: F8P-BOXED
Lifesafety Power F8P-BOXED Voltage-Based Lock Power Module
- Isolates lock power from controller circuits, preventing maglock dropout under load.
- Operates on 230 VAC; integrates into standard electrical enclosures via wall or DIN-rail.
- Supports multiple maglocks and electronic strikes from one regulated source per enclosure.
$60.00 $39.99 Save $20.01 -
Lifesafety Power
SKU: FPO250/250-2D82F8E2
Lifesafety Power FPO250/250-2D82F8E2 Sixteen Door Access Control
- Dual 12V/24V rails at 250W each power mixed-voltage door hardware from one enclosure.
- Supports up to 16 doors including EM locks, readers, RTE sensors, and strike plates.
- Independent rail design isolates faults — an overloaded 24V channel won't drop 12V egress locks.
$1,204.00 $790.99 Save $413.01 -
Lifesafety Power
SKU: FPO75-C4E1
Lifesafety Power FPO75-C4E1 4 Door Access Control 4 Lock Outputs
- Four individually fused 3A outputs isolate door circuits, preventing one fault from affecting others.
- 75W budget supports four EM locks or solenoid strikes at 12V or 24V without auxiliary boost.
- DIN-rail E1 enclosure mounts directly in access control cabinets, eliminating extra surface hardware.
$456.00 $299.99 Save $156.01 -
Lifesafety Power
SKU: FPO75/150-C4D8E1
Lifesafety Power FPO75/150-C4D8E1 Four Door Access Control 1224V
- Dual 12V and 24V rails power mixed-voltage locks and readers from one chassis.
- 75W budget supports four doors; single DIN-rail or wall-mount chassis cuts cabinet clutter.
- Continuous-duty passive cooling suits 24/7 access control without active fan maintenance.
$804.00 $528.99 Save $275.01 -
Lifesafety Power
SKU: R8-BOXED
Lifesafety Power R8-BOXED Lock output module 8 outputs
- Eight individually fused 12VDC/3A outputs isolate faults so one shorted lock can't take down adjacent doors.
- Per-output failsafe/fail-secure jumper selection lets you match egress or security requirements door by door.
- FAI supervision detects open circuits, shorts, and supply faults and propagates alerts to the host panel instantly.
$114.00 $74.99 Save $39.01 -
Lifesafety Power
SKU: RC150-C16
Lifesafety Power RC150-C16 rack mount DC lock control 12V@12A Or2
- 16 independently supervised outputs isolate faults without disrupting other lock circuits.
- Dual-voltage operation: 12VDC @ 12A or 24VDC @ 6A suits mixed door hardware installs.
- 19-inch rack-mount form factor centralizes lock power across multi-door enterprise deployments.
$909.00 $597.99 Save $311.01 -
Lifesafety Power
SKU: RGM-D8PZ1
Lifesafety Power Rgm-D8PZ1 Empty R2U Rackdrawer
- Mounts up to four Lenel access control panels on a removable backplate in 2U space.
- 19" EIA-compliant form factor (19W × 3.5H × 20.5D in.) fits standard rack rails.
- Integrated lockset and wire management arm reduce tampering risk and cable strain.
$1,337.00 $878.99 Save $458.01 -
Lifesafety Power
SKU: RGM-X-BOXED
Lifesafety Power RGM-X-BOXED Gemini Rack Drawer RGM-X 2U black
- Mounts in standard 19-inch racks, occupying only 2U of vertical space.
- Pull-out drawer design provides direct access to internal components during maintenance.
- Engineered for Lifesafety Power Gemini system frames; verify chassis compatibility before ordering.
$1,012.00 $664.99 Save $347.01 -
Napco
SKU: GEM-EZM8
Napco GEM-EZM8 Access Control Module
Distributed access processor for multi-door commercial systems with card and PIN
- GEM-EZM8 access control module for credential validation
- Card and PIN with Wiegand/Serial reader support
- Local door strike decisions in milliseconds
$225.61 $101.99 Save $123.62 -
Napco
SKU: GEM-K1CA
Napco GEM-K1CA Keypad Reader with Dual-Line Display
Menu-driven keypad reader with dual-line display for PIN-based access control
- GEM-K1CA keypad reader with 32-char backlit display
- Dual-line display for prompt + status messaging
- Direct-fit for Napco access control panels
$377.64 $376.99 Save $0.65 -
Napco
SKU: GEM-K1VPS
Napco GEM-K1VPS Backlit Alphanumeric Keypad Reader
Backlit alphanumeric LCD keypad for Napco GEM access control
- GEM-K1VPS keypad reader with backlit alphanumeric LCD
- Auto-sensing dim mode for variable lighting
- Custom prompts reduce user confusion and support calls
$468.23 $213.99 Save $254.24 -
Napco
SKU: GEM-K4RF
Napco GEM-K4RF Keypad Reader
Large-display PIN keypad reader for Napco control panel integration
- GEM-K4RF keypad reader with large backlit English display
- PIN entry for parking and exterior entry points
- Clear visibility in low-light environments
$222.99 $206.99 Save $16.00 -
Napco
SKU: GEM-P3200
Napco GEM-P3200 Keypad Reader
PIN keypad reader for Napco systems—no cards or biometrics needed
- GEM-P3200 keypad reader with PIN-only credential entry
- Numeric/alphanumeric code entry at door
- Centralized Napco panel code management
$451.89 $204.99 Save $246.90 -
Napco
SKU: GEM-P801
Napco GEM-P801 Keypad Reader
PIN keypad reader for Napco GEM access control systems
- GEM-P801 RP8 numeric keypad reader for door entry
- PIN credential entry with Napco GEM compatibility
- Multi-reader door access integration
$301.38 $300.99 Save $0.39 -
Napco
SKU: GEM-P816
Napco GEM-P816 Keypad Reader
PIN keypad reader for Napco access control systems
- GEM-P816 keypad reader with PIN entry capability
- Numeric/employee ID credential sequences
- Door-level access control for Napco systems
$240.19 $239.99 Save $0.20 -
Napco
SKU: GEM-P9600
Napco GEM-P9600 PIN Keypad Reader for Access Control
Numeric PIN keypad reader for Napco GEM access control systems
- GEM-P9600 PIN keypad reader with RS-232 serial
- Deterministic wired comms for access control
- Eliminates lost-card credential replacement overhead
$875.23 $394.99 Save $480.24
Access Control
Access control systems secure doors, manage credentials, and enforce entry policies across commercial facilities. Build a scalable deployment with the right combination of controllers, readers, credentials, and door hardware.
Plan Your Deployment
- Door count and expansion requirements
- Reader type (card, keypad, biometric) and credential format
- Fail-safe vs fail-secure hardware design
- Power, cabling, and network connectivity planning
- Multi-site governance and consistent standards













