Honeywell

SKU: IS2535

Honeywell IS2535 PIR Motion Detector

Wired 2D handheld scanner for warehouse and retail barcode capture

• 2D scan engine reads QR, Data Matrix, and UPC/EAN in a single pass.
• Wired USB/serial connection removes battery dependency for fixed workstations.
• Operates from 14°F to 131°F, supporting non-climate-controlled facility use.

Honeywell

SKU: ISCAN1-REPAIR

Honeywell ISCAN1-REPAIR Flat Rate Repair Service

• Flat-rate pricing per device eliminates unpredictable labor and parts invoices.
• Honeywell factory repair uses genuine parts, ensuring consistent repair quality.
• Streamlined intake requires MPN, serial number, and fault description to start claim.

Honeywell

SKU: ISCAN2-REPAIR

Honeywell ISCAN2-REPAIR Flat Rate Repair Service

• Flat-rate pricing eliminates unpredictable diagnostic and labor charges per repair.
• Service covers evaluation, repair, and return—keeping Honeywell scanner fleets operational.
• Predictable repair costs simplify maintenance budgeting across multi-device deployments.

Honeywell

SKU: L7000

Honeywell L7000 LYNX Touch Wireless Alarm Control Panel

Wi-Fi handheld 2D scanner with 7" touchscreen for warehouse ops

• 2D scan engine reads both 1D and 2D barcodes in a single pass, reducing device count.
• Built-in Wi-Fi enables real-time WMS data sync, eliminating batch-upload workflows.
• 7-inch color touchscreen supports intuitive operator navigation in warehouse lighting.

Honeywell

SKU: LTE-IA

Honeywell LTE-IA AlarmNet LTE Communicator for AT&T

Dual-path AT&T LTE communicator for VISTA panels with 256-bit encryption

• Dual-path LTE + internet delivery ensures signal continuity if either path fails.
• 256-bit AES encryption secures alarm and supervisory traffic across both comm paths.
• Connects via 4-wire ECP bus; supports VISTA-15P, 20P, 128BPT, and 250BPT panels.

Honeywell

SKU: LTE-IV

Honeywell LTE-IV AlarmNet LTE Communicator for Verizon

Verizon 4G LTE dual-path communicator for VISTA alarm panels

• Dual-path LTE + internet delivers redundant signaling that meets UL/ULC commercial requirements.
• 256-bit AES encryption secures all alarm, supervisory, and status traffic over Verizon 4G LTE Cat 1.
• Connects via 4-wire ECP bus to VISTA-15P, -20P, -128BPT, and -250BPT without additional adapters.

Honeywell

SKU: LTE-L57A

Honeywell LTE-L57A AT&T 4G LTE Communicator for LYNX Touch

AT&T 4G LTE cellular module for LYNX Touch panels with internal antenna

• Installs internally via bridge connector—no external enclosure or separate power supply needed.
• Five AT&T LTE bands (2, 4, 5, 12, 13) reduce coverage dead zones across varied deployments.
• 256-bit AES encryption satisfies standard monitoring requirements for L5200, L5210, and L7000 panels.

Honeywell

SKU: LTE-L57V

Honeywell LTE-L57V LYNX LTE Communicator for Verizon

Verizon 4G LTE module for LYNX Touch panels with 256-bit encryption

• Multi-band Verizon 4G LTE (Bands 2/4/5/12/13) maintains signal in rural and fringe sites.
• 256-bit AES encryption secures every alarm transmission between panel and monitoring center.
• Internal bridge connector installs in the L5200, L5210, or L7000 without external cables or antennas.

Honeywell

SKU: LTE-XA

Honeywell LTE-XA LTE-X Communicator for AT&T

Dual LTE + Wi-Fi cellular communicator with 256-bit encryption for AT&T

• Dual LTE + Wi-Fi paths eliminate single-point-of-failure in alarm signal delivery.
• 256-bit AES encryption secures all transmitted alarm data end-to-end.
• Compact form factor fits panel-mount or wall-mount installs with minimal footprint.

Honeywell

SKU: LTE-XV

Honeywell LTE-XV LTE-X Communicator for Verizon

LTE cellular communicator with Wi-Fi backup for Verizon networks

• LTE-X cellular communicator for Verizon network
• Wi-Fi backup for areas without LTE coverage
• 256-bit AES encryption for security comms

Honeywell

SKU: MPA2C3

Honeywell MPA2C3 Wired Mobile Computer for Access Control

Hardwired mobile computer for Honeywell MPA2 access control setup

• Hardwired Ethernet connection eliminates RF interference during on-site panel work.
• Mobile form factor lets one technician move panel-to-panel without a laptop or bag.
• Purpose-built for Honeywell MPA2 platforms, enabling direct on-site configuration.

Honeywell

SKU: MPA2C3-4

Honeywell MPA2C3-4 4-Door Access Controller

4-door wired controller with hardwired Ethernet for reliable access management

• Manages up to four doors from a single controller, reducing panel count and wiring runs.
• Hardwired Ethernet connectivity eliminates RF interference and ensures deterministic door response.
• Centralized credential management lets you issue, revoke, and audit access across all four doors.

Honeywell

SKU: MPA2MPXPSU

Honeywell MPA2MPXPSU 2-Door Access Control System

Wired 2-door access control with 125KHz proximity cards and hardwired reliability

• Hardwired control bus eliminates RF interference for deterministic door response.
• Controls two independent entry points from a single wired control platform.
• Wired architecture ensures continuous availability without wireless fallback dependency.

Honeywell

SKU: MPA4MPSU

Honeywell MPA4MPSU 4-Door Access Control Controller

Wired 4-door controller with iMX.6 processor and real-time audit logging

• Controls up to 4 doors from one enclosure, reducing panel count and wiring runs.
• iMX.6 ARM processor handles credential lookup and door logic without external hardware.
• Onboard RTC timestamps every access event and denial for accurate audit trail logs.

Honeywell

SKU: MPA4MPXPSU

Honeywell MPA4MPXPSU 4-Door Access Control System

4-door wired access controller with relay outputs for electric locks

• Controls four independent door zones from one controller, reducing per-door unit clutter.
• Hardwired topology eliminates RF interference for reliable lock control in shielded facilities.
• Relay outputs support electric strikes, magnetic locks, and motorized mechanisms per door.

Honeywell

SKU: ODP8P35SPEC

Honeywell ODP8P35SPEC DESFire EV2 8K 35bit Security Credential

DESFire EV2 smart card with 8K memory for enterprise access control

• DESFire EV2 protocol delivers mutual authentication and encrypted data transfer at 13.56 MHz.
• 8K onboard memory supports multi-application credential deployments on a single card.
• ISO/IEC 14443 Type A interface ensures compatibility with standard NFC contactless readers.