ATEN
SKU: VW784
Overview
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Overview
Questions about this product? Free pre-sales support from a senior specialist — product questions, compatibility checks, BOM quotes, price confirmation — typically answered within one business day. Need camera placement or system design work? Engineering time is $175 per hour (qty 1 = 1 hour). Hardware buyers get up to one hour ($175) credited back on their order.
The VW754 is a streaming input expansion board for ATEN VW Series video wall processors, adding a dedicated network video source channel without requiring a separate decoder appliance. Drop it into a VW Series chassis and it pulls H.265 or H.264 streams over RTSP at up to 3840×2160@60Hz (4:2:0) — giving you native 4K source capacity on the video wall without upscaling from a lower-resolution input. ONVIF support means IP cameras from most enterprise surveillance manufacturers integrate directly, making this board a practical bridge between an existing VMS infrastructure and a control-room display wall. The single Gigabit RJ45 interface keeps cabling simple and handles the throughput a 4K@60 stream demands without a dedicated fiber drop.
The VW754 is designed for ATEN VW Series video wall processors that accept input expansion boards — verify your specific chassis model supports input board slots before ordering. It decodes streams delivered over RTSP using H.265 or H.264 compression, and accepts ONVIF-compliant sources, which covers the majority of current IP camera and encoder products from enterprise surveillance vendors. Maximum input resolution is 3840×2160 at 60Hz in 4:2:0 color format — confirm your source encoder and VW chassis both support 4K@60 passthrough if that frame rate is a deployment requirement.
Install into the target VW Series chassis input board slot per the chassis installation guide. Connect the Gigabit RJ45 to a switch port on the same network segment as your RTSP source devices — the interface supports 10/100/1000 Mbps auto-negotiation. Maintain ambient humidity below 80% RH non-condensing at the rack location. Current firmware is v1.1.101 (released 2026-04-15); apply before commissioning to ensure stream compatibility with current ONVIF camera firmware revisions. No additional power supply is required — the board draws power from the host chassis.
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Looking for more ATEN products? Shop the full ATEN catalog →
Support services and planning resources for commercial surveillance, access control, and infrastructure deployments.
Fixed scope • Fixed price