Accessories
Showing Results for Accessories
-
Pelco
SKU: VS-L6Q-MUC-S
Pelco L6Q Multi Unit Single Desktop Charger - VS-L6Q-MUC-S
- Charges the L6Q's 12 Ah internal battery pack via 120V AC or 12V DC input.
- M12 connector interface supports battery rotation across multiple L6Q LPR units.
- Desktop form factor needs no mounting hardware — ships with bracket and band straps.
$300.00 $222.99 Save $77.01The item has been added -
Pelco
SKU: VS-L6Q-POLE-PWR-TAP-35FT
Pelco L6Q Pole Power Tap; 100-277V to - VS-L6Q-POLE-PWR-TAP-35FT
- 35-foot cable run reaches pole-mounted L6Q cameras from ground-level AC feeds.
- Accepts 100–277V AC input, supporting both 120V and 277V commercial circuits.
- M12 connector integrates directly with the L6Q's 12 Ah swappable battery rail.
$875.00 $649.99 Save $225.01The item has been added -
Pelco
SKU: VS-L6Q-SFT-CASE
Pelco L6Q Rapid-Deployment Carry Case - VS-L6Q-SFT-CASE
- IP67-rated enclosure protects the L6Q during transport and outdoor deployments.
- Integrated ball-joint bracket enables tool-free angle adjustment on pole or rack mounts.
- Paintable shroud and M12 wiring support fast, site-matched installation in minutes.
$150.00 $149.99 Save $0.01The item has been added -
Pelco
SKU: VS-L6Q-40WSP
Pelco L6Q Solar Panel Only - VS-L6Q-40WSP
- IP67-rated panel withstands rain, snow, and temps from -40°C to 60°C.
- 40W, 12V DC output eliminates AC infrastructure for remote LPR deployments.
- Pole or rack mounts via included bracket and band straps for fast setup.
$800.00 $594.99 Save $205.01The item has been added -
Pelco
SKU: EG3Z3915TCSMPWIR-MSI
Pelco LENS iCS 3.9-10mm f1.5 1/1.8 - EG3Z3915TCSMPWIR-MSI
- f1.5 aperture maintains usable detail in low-light corridors and loading docks.
- 3.9–10mm varifocal range lets you set exact FOV at install without swapping lenses.
- Designed for 1/1.8" sensors; verify mount type before ordering to avoid vignetting.
$399.00 $300.99 Save $98.01The item has been added -
Pelco
SKU: MBXWRE
Pelco MBXWRE NDAA Compliant Key for MAXIMUS MBX
- 550 mm (22 in) stainless steel shaft delivers leverage to open MBX enclosures safely.
- NDAA-compliant genuine Pelco part ensures regulatory conformance on government deployments.
- Designed exclusively for MAXIMUS MBX enclosures, eliminating compatibility guesswork on site.
$70.91 $69.99 Save $0.92The item has been added -
Pelco
SKU: FTRVL-FRSTLOCAL
Pelco Ndaa Compliant Ftrvl-Frstlocal - First Day Of Travel By Car
- NDAA-compliant across Bullet, Dome, and Box form factors for federal deployments.
- ONVIF Profile G integration simplifies VMS onboarding across supported Sarix camera lines.
- Day/Night imaging with analytics overlay support reduces post-install configuration effort.
$945.00 $729.99 Save $215.01The item has been added -
Pelco
SKU: INT-OCCUPANCY
Pelco NDAA Compliant Occupancy Solution For - INT-OCCUPANCY
- NDAA-compliant occupancy counting integrates natively with VideoXpert Pro v3.11.x+.
- IN/OUT line crossing analytics deliver real-time and historical occupancy data.
- Includes Config app, standalone Dashboard, and VxOpsCenter plugin for full workflow fit.
$856.80 $612.99 Save $243.81The item has been added -
Pelco
SKU: FLDSUP-CONFIG
Pelco Ndaa Compliant One Day Onsite (8HRS) - FLDSUP-CONFIG
- Pelco one-day (8hr) onsite VMS configuration service
- NDAA-compliant professional services engagement
- Bridges hardware install to operational VMS deployment
$3,500.00 $2,748.99 Save $751.01The item has been added -
Pelco
SKU: FLDSUP-TSHOOT
Pelco Ndaa Compliant One Day Onsite (8HRS) - FLDSUP-TSHOOT
- Eight hours of factory-trained Pelco engineer time delivered directly to your site.
- NDAA-compliant engagement satisfies DoD and critical-infrastructure supply-chain requirements.
- Supports ONVIF and major VMS platforms including Milestone, Genetec, Exacq, and Salient.
$3,500.00 $2,500.99 Save $999.01The item has been added -
Pelco
SKU: FLDSUP-AUDIT
Pelco Ndaa Compliant One Day Onsite (8HRS) System - FLDSUP-AUDIT
- Full 8-hour onsite audit validates Pelco VMS config against manufacturer specs.
- Covers network, power, cooling, and diagnostics with a documented findings report.
- NDAA-compliant service supports pre-install readiness or post-install verification.
$3,500.00 $2,500.99 Save $999.01The item has been added -
Pelco
SKU: RMTSUP-CONFIG
Pelco NDAA Compliant One Day Remote (8Hrs) - RMTSUP-CONFIG
- NDAA-compliant design clears procurement in federally restricted environments.
- 8-hour remote session window enables structured, time-bounded modem maintenance.
- Supports full AT command set (ATD, ATE, ATL, ATQ, ATX, ATZ) on 326X series modems.
$3,500.00 $2,500.99 Save $999.01The item has been added -
Pelco
SKU: TRNF-VXPRO
Pelco Ndaa Compliant Trnf-Vxpro - Vx Pro Inst Adm Op In Fld 8 Ppl
- Onsite instruction for up to 8 staff covers VX Pro install, admin, and operation.
- Training uses your live deployment, reducing config errors before project handoff.
- NDAA Section 889 compliant service, cleared for federal and municipal installations.
$892.50 $637.99 Save $254.51The item has been added -
Pelco
SKU: VAX-AVGSPED-STD
Pelco NDAA Compliant Vaxtor Avrage Speed - VAX-AVGSPED-STD
- NDAA Section 889 compliant for federal and government camera deployments.
- Per-camera perpetual license integrates with Pelco VideoXpert and Vaxtor Analytics Engine.
- Zone-based average speed enforcement across multiple detection points covers corridors single-point radar misses.
$1,813.35 $1,295.99 Save $517.36The item has been added -
Pelco
SKU: VAX-AVGSPED-BAS
Pelco NDAA Compliant Vaxtor Avrage Speed Basic - VAX-AVGSPED-BAS
- NDAA Section 889 compliant — clears federal and government-funded project procurement.
- Per-camera perpetual license integrates with Pelco VideoXpert and Vaxtor Analytics Engine.
- Zone-based average speed calc eliminates point-slowdown behavior across multi-lane roads.
$725.55 $518.99 Save $206.56The item has been added -
Pelco
SKU: VAX-AVGSPED-PRO
Pelco NDAA Compliant Vaxtor Avrage Speed Pro - VAX-AVGSPED-PRO
- Calculates speed over distance between zones, catching speeders who brake at fixed points.
- NDAA Section 889 compliant, qualifying it for federal and government-regulated deployments.
- Perpetual per-camera license integrates with Pelco VideoXpert and Vaxtor Analytics Engine.
$3,627.75 $2,591.99 Save $1,035.76The item has been added
Accessories
Warehouse data capture accessories support the daily operation of barcode scanners, mobile computers, RFID readers, and industrial label printers. From charging docks and batteries to mounting systems and communication cables, these components ensure reliable performance across high-volume warehouse and distribution environments.
Deployment Considerations
- Charging infrastructure for multi-shift operations
- Spare battery planning for uninterrupted workflows
- Vehicle mounts and workstation docks
- Connectivity cables and interface modules
- Device protection and environmental durability