Lifesafety Power

SKU: FPO75-D8E4S

Lifesafety Power FPO75-D8E4S FPO75-D8E4S

• 75W total output powers cameras, readers, locks, and aux devices from one supply.
• Multiple independent output channels let you balance load distribution across circuits.
• Centralized sourcing eliminates per-endpoint adapters, simplifying conduit runs.

Lifesafety Power

SKU: FPO75-D8PE1

Lifesafety Power FPO75-D8PE1 FPO75-D8PE1

• 8 independent Class 2 outputs, each fused at 2.5A, prevent cascade failures.
• 75W capacity delivers 6A at 12VDC or 3A at 24VDC from a single supply point.
• E1 enclosure suits indoor control rooms, closets, and equipment cabinet installs.

Lifesafety Power

SKU: FPO75-D8PE2VM/P

Lifesafety Power FPO75-D8PE2VM/P FPO75-D8PE2VM/P

• Delivers 6A at 12VDC or 3A at 24VDC across eight Class II power-limited outputs.
• 20"H × 16"W × 4.5"D enclosure mounts in standard electrical closets or cabinets.
• Centralizes auxiliary power for card readers, electric locks, and sensor loops.

Lifesafety Power

SKU: FPO75-D8PE4B

Lifesafety Power FPO75-D8PE4B FPO75-D8PE4B

• 75W DIN-rail supply delivers 8 independently supervised outputs for multi-zone deployments.
• Per-output supervision enables individual circuit fault isolation across mixed device types.
• Supports 12VDC or 24VDC input rails to fit existing facility power infrastructure.

Lifesafety Power

SKU: FPO75-D8PE6M

Lifesafety Power FPO75-D8PE6M FPO75-D8PE6M

• 75W regulated DC output sustains cameras and access readers during mains failure.
• Multi-output terminal design allows modular power distribution across several endpoints.
• Compact form factor supports wall-mount or rack installation in network closets and IDF rooms.

Lifesafety Power

SKU: FPO75-D8PNLCE4M

Lifesafety Power FPO75-D8PNLCE4M 75W Single Voltage 120 VAC

• 75W single-voltage output centralizes power for multiple low-current security loads.
• 120VAC input aligns with standard dedicated AC circuits, reducing distribution complexity.
• Single-voltage design cuts transformer overhead and lowers installation labor on uniform rails.

Lifesafety Power

SKU: FPO75/150-2C82D8E8M

Lifesafety Power FPO75/150-2C82D8E8M FPO75/150-2C82D8E8M

Lifesafety Power

SKU: FPO75/150-2C8P2D8PE4M1

Lifesafety Power FPO75/150-2C8P2D8PE4M1 FPO75/150-2C8P2D8PE4M1

• Redundant dual-channel architecture eliminates single points of failure in critical deployments.
• 75W primary / 150W combined output supports parallel load-balancing across multiple device zones.
• Eight isolated power circuits across 2 distribution boards enable flexible per-zone circuit assignment.

Lifesafety Power

SKU: FPO75/150-C4C82D8PE4M1

Lifesafety Power FPO75/150-C4C82D8PE4M1 16 Door

• Supports up to 16 doors from a single 12V DC power distribution module.
• Consolidates lock, reader, and ancillary device power to reduce panel clutter.
• Fits small-to-mid-sized access control installs with room for moderate expansion.

Lifesafety Power

SKU: FPO75/150-C4C82D8PE8M1

Lifesafety Power FPO75/150-C4C82D8PE8M1 FPO75/150-C4C82D8PE8M1

• 75W redundant output eliminates single points of failure in camera and access control systems.
• Automatic switchover between dual AC inputs requires no manual intervention or system restart.
• Configuration code C4C82D8PE8M1 defines output voltage, terminal layout, and supervision protocol.

Lifesafety Power

SKU: FPO75/150-C4PD8PE1

Lifesafety Power FPO75/150-C4PD8PE1 FPO75/150-C4PD8PE1

• Dual independent output rails isolate loads, preventing a single fault from dropping all circuits.
• Redundant architecture supports 99.5%+ uptime deployments for NVRs, access panels, and alarms.
• Separate circuit inputs allow phase or UPS isolation, maximizing protection against power events.

Lifesafety Power

SKU: FPO75/150-C4PD8PE2

Lifesafety Power FPO75/150-C4PD8PE2 FPO75/150-C4PD8PE2

Lifesafety Power

SKU: FPO75/150-C8D8E2

Lifesafety Power FPO75/150-C8D8E2 FPO75/150-C8D8E2

• Delivers 75W at 12V or 150W at 24V to match your downstream device requirements.
• Eight fused 3A auxiliary outputs distribute power to multiple locks or control boards.
• Compact E2 enclosure mounts in server rooms, electrical closets, or equipment racks.

Lifesafety Power

SKU: FPO75/150-C8D8E4

Lifesafety Power FPO75/150-C8D8E4 FPO75/150-C8D8E4

• Dual-output design powers multiple security devices from a single field-installed unit.
• Centralized power supervision simplifies monitoring of cameras, readers, and alarm loads.
• Standard hand-tool installation reduces deployment time in warehouse and enterprise sites.

Lifesafety Power

SKU: FPO75/150-C8D8E4A

Lifesafety Power FPO75/150-C8D8E4A FPO75/150-C8D8E4A

• 225W total output powers simultaneous 12V and 24V rails for multi-door deployments.
• 8 onboard DIN relay modules control up to 8 independent door strike or lock zones.
• Steel E4A enclosure (24×20×4.5 in) supports surface-mount or 19-inch rack integration.

Lifesafety Power

SKU: FPO75/150-C8D8E4S

Lifesafety Power FPO75/150-C8D8E4S FPO75/150-C8D8E4S

• Delivers 225W total across dual 12V and 24V outputs from a single enclosure.
• E4S form factor (24×20×4.5 in) mounts to 19-inch racks or wall surfaces.
• Supports mixed-voltage loads — IP cameras on 12V, access readers on 24V.