Lifesafety Power

SKU: FPO150-B100C8D8PE6M1

Lifesafety Power FPO150-B100C8D8PE6M1 FPO150-B100C8D8PE6M1

• Dual AC inputs eliminate single-point-of-failure risk on mains power.
• Supervised outputs report load-circuit faults directly to the control panel.
• 150W capacity supports access control, CCTV, and alarm circuits simultaneously.

Lifesafety Power

SKU: FPO150-B100C8E4M

Lifesafety Power FPO150-B100C8E4M FPO150-B100C8E4M

Lifesafety Power

SKU: FPO150-B100C8P2D8PE6M/P8-A

Lifesafety Power FPO150-B100C8P2D8PE6M/P8-A FPO150-B100C8P2D8PE6M

• 150W regulated output supports mid-to-large camera arrays and mixed access control loads.
• 8 independent output channels allow isolated rail assignment for devices with varied voltage needs.
• Integrated battery backup and supervision circuitry ensures failover and fault alerting in 24/7 deployments.

Lifesafety Power

SKU: FPO150-B100C8P2D8PE6M/P8-C

Lifesafety Power FPO150-B100C8P2D8PE6M/P8-C FPO150-B100C8P2D8PE6M

• 150W modular architecture supports multi-output security and access control deployments.
• Field-configurable output modules adapt to changing circuit requirements without full replacement.
• Individual circuit protection allows channel reconfiguration without powering down the supply.

Lifesafety Power

SKU: FPO150-B100C8PD8PE2

Lifesafety Power FPO150-B100C8PD8PE2 150W Dvps 12/24 8 Lock Contr

• Dual 12VDC and 24VDC rails in one enclosure eliminate separate supplies for mixed-voltage deployments.
• Eight supervised, power-limited outputs at 2.5A each isolate circuits so one fault won't collapse the bus.
• 150W total capacity with 4A per rail supports simultaneous lock, reader, and control circuit loading.

Lifesafety Power

SKU: FPO150-B100C8PD8PE4A

Lifesafety Power FPO150-B100C8PD8PE4A 8DR AMAG specific with 8 au

• Eight discrete 2.5A outputs eliminate daisy-chaining across multi-door AMAG deployments.
• Dedicated 12V and 24V rails at 4A each power readers and strikes on independent circuits.
• Class 2 certified 150W supply ships in an E4 enclosure ready for 19-inch or wall-mount rack.

Lifesafety Power

SKU: FPO150-B100C8PD8PE4M

Lifesafety Power FPO150-B100C8PD8PE4M FPO150-B100C8PD8PE4M

• Delivers 150W total with simultaneous 4A at 12V and 4A at 24V outputs.
• Supports 8 door lock circuits and 8 Class 2-rated auxiliary outputs at 2.5A each.
• E4M enclosure with Mercury backplate suits constrained security closets and cabinets.

Lifesafety Power

SKU: FPO150-B100C8PD8PE4M1

Lifesafety Power FPO150-B100C8PD8PE4M1 FPO150-B100C8PD8PE4M1

• 150W regulated output consolidates power for cameras, readers, and door strikes.
• Eight independently fused channels limit fault propagation across connected devices.
• PD supervision monitors per-channel power delivery for proactive fault detection.

Lifesafety Power

SKU: FPO150-B100C8PD8PE4V1

Lifesafety Power FPO150-B100C8PD8PE4V1 FPO150-B100C8PD8PE4V1

• 150W access control power supply for door locks and latches
• Multi-zone power distribution for facility deployments
• Equipment cabinet enclosure for protected install

Lifesafety Power

SKU: FPO150-B100C8PD8PE6V

Lifesafety Power FPO150-B100C8PD8PE6V FPO150-B100C8PD8PE6V

• 150W regulated output supports multiple DC devices from a single centralized supply.
• Eliminates individual wall supplies, reducing installation labor on multi-device builds.
• Compatible with 12VDC and 24VDC readers, door strikes, and motion sensors.

Lifesafety Power

SKU: FPO150-B100C8PE2M

Lifesafety Power FPO150-B100C8PE2M 150W Dual Voltage 120 VAC 8

• Delivers 150W across 8 relay lock outputs for multi-zone door hardware control.
• 120 VAC input integrates directly with standard building power—no step-down required.
• Relay-driven outputs support door strikes, mag-locks, and fail-safe latches in one supply.

Lifesafety Power

SKU: FPO150-B100C8PE4M1

Lifesafety Power FPO150-B100C8PE4M1 FPO150-B100C8PE4M1

• 150W managed supply centralizes power for 4–8 camera circuits in one unit.
• Per-channel fault isolation prevents a single load failure from taking down adjacent circuits.
• Accepts AC 110–240V input, suitable for standard commercial building infrastructure.

Lifesafety Power

SKU: FPO150-B100E1

Lifesafety Power FPO150-B100E1 FPO150-B100E1

• Delivers 4A at 12V and 4A at 24V simultaneously from a single 150W supply.
• Eliminates separate power feeds for mixed 12V sensors and 24V access control devices.
• E1 enclosure fits standard wall-mount or rack installs in control rooms and closets.

Lifesafety Power

SKU: FPO150-B150C8D8PE4M

Lifesafety Power FPO150-B150C8D8PE4M 150W selectable 12/24V 12A

• 150W supply runs up to 12A at 12V or 6A at 24V for multi-door deployments.
• 8 individually fused auxiliary outputs allow independent circuit protection per door.
• Integrated fire alarm interface supports fail-safe and fail-secure lock switching.

Lifesafety Power

SKU: FPO150-B150C8D8PE4M1

Lifesafety Power FPO150-B150C8D8PE4M1 150W Dual Voltage 120 VAC

• 150W at 120 VAC input supports mid-sized multi-door access control deployments.
• 8 relay lock outputs drive EM locks and REX devices across independent door circuits.
• 8 auxiliary outputs power sensors and ancillary devices without a separate supply.

Lifesafety Power

SKU: FPO150-BOXED

Lifesafety Power FPO150-BOXED FPO150-BOXED

• 150W rated output handles mixed loads—cameras, readers, and door strikes in one zone.
• 12 VDC output suits standard access control readers and low-voltage security cameras.
• Factory-boxed enclosure eliminates on-site assembly, reducing installation labor at remote sites.