Unitech · 4090-900011G

Unitech RFID UHF - 4090-900011G

When inventory accuracy and asset tracking directly impact your client's bottom line, passive RFID reading becomes a critical integration point

• UHF RFID tag — passive 860-960 MHz operation
• Multi-tag simultaneous reading speeds inventory capture
• No battery — reduces total cost of asset tagging

Unitech · 4090-900008G

Unitech RFID UHF LABEL_BOOK_230MM_5MM_IMPINJ - 4090-900008G

100-pack of 230mm RFID UHF label stock pre-printed with Impinj Monza 4E inlays

• UHF RFID label book — 100 pack with Impinj Monza 4E inlays
• 230 mm label stock for scaled RFID encoding workflows
• Pre-printed inlays for warehouse asset tagging

Unitech · 4090-900015G

Unitech RFID UHF Label_wood - 4090-900015G

Tracking wood pallets, lumber stacks, and wooden crates in warehouses and yards demands RFID tags engineered to handle rough surfaces and outdoor

• UHF RFID label with wood-surface adhesive formulation
• 20+ ft read distance with standard UHF readers
• Bond integrity through moisture fluctuations in lumber yards

Unitech · 4090-900007G

Unitech RFID UHF TAG_METAL_70MM_20MM_3.8MM_ALIEN - 4090-900007G

Asset tracking on metal surfaces presents unique RF challenges that standard RFID tags can't overcome

• UHF RFID metal-mount tag — 70 x 20 x 3.8 mm with Alien chipset
• Integrated spacer eliminates detuning on metal surfaces
• EPC Gen2 protocol for tool and IT asset tracking

Unitech · RP200-42A830G-AZ3-NB

Unitech RP200-42A830G-AZ3-NB 2D Wired Handheld Barcode Scanner

2D wired barcode scanner with IP65 rating for warehouse use

• 2D scan engine reads linear, 2D, and Data Matrix in one device
• IP65 dust-tight build resistant to water spray on the warehouse floor
• Wired 2D handheld scanner with 200mAh battery for fixed use

Unitech · RP200-42AA30G-AZ3-NB

Unitech RP200-42AA30G-AZ3-NB 2D Handheld Barcode Scanner

Wired 2D handheld scanner reads 1D and 2D barcodes in warehouse and retail

• 2D scan engine reads 1D and 2D symbologies including QR, PDF417
• Eliminates separate 1D and 2D scanners in mixed-use environments
• IP65 wired 2D handheld scanner with 200mAh battery

Unitech · 1550-900077G

Unitech RS232 Cable 59" RJ45 to DB9F Straight - 1550-900077G

59-inch RS232 serial cable bridging RJ45 Ethernet connectors to DB9 female serial ports

• 59-inch RS232 cable — RJ45 to DB9F for MS250 scanners
• Connects Unitech presentation scanners to legacy serial hosts
• Straight-through wiring for direct host port termination

Unitech · 3114-5801141

Unitech RS232 Cable 64" RJ45 to DB9F Straight - 3114-5801141

Unitech RS232 serial cable, 64 inches in length, terminated with an RJ45 connector on the scanner end and a DB9 female connector on the host end, in

• 64-inch RS232 cable — RJ45 to DB9F for Unitech scanners
• Straight-through wiring for serial host connection
• Shielded cable for clean signal in noisy environments

Unitech · 401701G

Unitech RT112 Screen Protector Single - 401701G

Single screen protector designed for the RT112 handheld mobile scanner

• Single screen protector for the Unitech RT112 handheld
• Shields display from scratches, dust, and impact damage
• Drop-in fit for field scanning operation cycles

Unitech · 400120-Z010

Unitech Stand FOR PEN Scanner Desktop Stand MS100 - 400120-Z010

Desktop stand designed to hold Unitech MS100 and MS120 pen scanners in a stationary position during operations

• Desktop stand for Unitech MS100 and MS120 pen scanners
• Holds scanner stationary during operations
• Frees operator's hands during repeated scanning tasks

Unitech · 1979-900003G

Unitech Stylus with Coil Strap for EA602 and HT730 - 1979-900003G

Replacement stylus with integrated coil strap designed for Unitech EA602 and HT730 handheld mobile computers

• Stylus with coil-strap tether for EA602 and HT730
• Coil tether keeps stylus attached to the device chassis
• Restores precise touch input on field handhelds

Unitech · 5000-900073G

Unitech TB110-Cradle Full Function - 5000-900073G

Full-function cradle designed for TB110-series mobile computers

• Full-function cradle for the Unitech TB110 mobile computer
• Charging plus data synchronization in a single mount
• Eliminates manual cable connect on shift handoff

Unitech · 5100-900032G

Unitech TB170 4-slot battery charger - 5100-900032G

Desktop 4-slot battery charger built to support fleet operations running continuous handheld scanning across multiple shifts

• 4-slot desktop battery charger for Unitech TB170 fleets
• Charges four TB170 batteries in parallel for shift rotation
• Compact 1.43 lb chassis for warehouse charging stations

Unitech · 1400-900068G

Unitech TB170 battery 7.68V 4300mAh - 1400-900068G

• 7.68V 4,300 mAh Li-ion battery for Unitech TB170
• Restores runtime after 12-24 months of charge cycle wear
• Drop-in replacement cell — direct fit on TB170 chassis

Unitech · 3210-900037G

Unitech TB170 Brief Case Handle - 3210-900037G

Brief case handle accessory for the TB170 protective carry case

• Brief case handle accessory for TB170 protective case
• Comfortable handheld carry for Unitech TB170 transport
• Attaches to integrated mounting points on the case

Unitech · 1979-900007G

Unitech TB170 EETI Digitizer Pen B-type - 1979-900007G

Replacement EETI digitizer pen (B-type) for the Unitech TB170 mobile computer

• EETI digitizer pen (B-type) for the Unitech TB170 tablet
• Precise input for signature capture and form completion
• Drop-in replacement when original pen is lost or worn

Unitech · 5200-900015G

Unitech TB170 KickStand (included plate) - 5200-900015G

Fixed KickStand mount with integrated attachment plate designed to hold Unitech mobile computers and barcode scanners in a stable, hands-free position

• KickStand mount with plate for Unitech TB170 mobile computer
• Hands-free position for charging and inspection workflows
• Includes attachment plate for secure device retention

Unitech · 5000-900101G

Unitech TB170 Office Dock - 5000-900101G

Cradle dock designed for the TB170 mobile computer

• Office dock cradle for the Unitech TB170 mobile computer
• Stationary charging and docking at base station
• Drop-in dock for end-of-shift device handoff workflows

Unitech · 3210-900034G

Unitech TB170 Shoulder Strap - 3210-900034G

Shoulder strap attachment for the TB170 mobile terminal

• Shoulder strap attachment for Unitech TB170 mobile terminal
• Distributes device weight across shoulder for long use
• Converts handheld terminal into wearable carry config

Unitech · 4070-900015G

Unitech TB170 Snap Mount (including plate) - 4070-900015G

Snap mount assembly built specifically for the TB170 mobile computer

• Snap mount with plate for the Unitech TB170 mobile computer
• Keyed quick-release snap for rapid device attachment
• Drop-in snap-and-plate kit for fixed-mount deployments

Unitech · 5000-900102G

Unitech TB170 Vehicle Dock - 5000-900102G

Stationary charging and communication cradle for Unitech mobile computers deployed in vehicle cabs, dock stations, and warehouse workstations

• Vehicle dock for the Unitech TB170 mobile computer
• Charging and data sync for vehicle-cab deployments
• Drop-in dock for warehouse and delivery van installs

Unitech · 4080-085003G

Unitech TB85 2D Engine (SE4107) Module - 4080-085003G

2D scan engine module (SE4107 variant) designed as an embedded imaging solution for Unitech mobile computers and data collection platforms requiring

• 2D scan engine module (SE4107) for Unitech TB85
• 1D and 2D barcode capture for embedded mobile platforms
• Drop-in scan engine for Unitech mobile computer service

Unitech · 401536G

Unitech TB85 Glass Screen Protector - 401536G

Glass screen protector engineered for the TB85 mobile computer

• Glass screen protector for the Unitech TB85 mobile computer
• Shields 5-inch display from scratches and crack damage
• Drop-in tempered glass for repeated contact wear

Unitech · 5500-900084G

Unitech TB85 GUN Grip With 2D Imager N6703 - 5500-900084G

Purpose-built GUN-grip accessory for the TB85 mobile computer, integrating a 2D imager (N6703) that adds QR code, Data Matrix, and traditional 1D

• Gun grip with integrated N6703 2D imager for TB85
• Adds QR, Data Matrix, and 1D capture to TB85 mobile computer
• Pistol-grip form for warehouse and field scanning

Unitech · TB85-Q1LFUMDG-Z3

Unitech TB85-Q1LFUMDG-Z3 2D Wi-Fi Handheld Scanner

Cordless 2D scanner with Wi-Fi, IP67 ruggedness, full-shift 8200mAh battery

• 2D scan engine reads 1D, QR, Data Matrix, and PDF417 barcodes
• IP67 ingress rating with 8200mAh battery for full-shift use
• Wi-Fi connectivity for warehouse handheld scanner deployment

Unitech · 1550-905923G

Unitech TS100 USB Cable - 1550-905923G

200cm (6.5 feet) interface cable designed to connect Unitech TS100 series handheld scanners to host systems or docking stations

• 200 cm (6.5 ft) USB interface cable for Unitech TS100
• RJ45 connector at the scanner end, USB at the host end
• Drop-in cable for TS100 handheld scanner deployments

Unitech · 5500-900015G-1

Unitech Unit ACC BAT Door FOR Extdlife Battery - 5500-900015G-1

Replacement battery compartment door designed for Unitech handheld scanners configured with extended-life battery modules

• Replacement battery door for Unitech extended-life modules
• Drop-in door for handheld scanners with extended batteries
• Restores compartment seal after thread or latch wear

Unitech · 5500-900013G-1

Unitech Unit ACC Hand Strap With Stylus Holder - 5500-900013G-1

Unitech accessory hand strap with an integrated stylus holder, compatible with Unitech rugged mobile computers and handheld scanners

• Hand strap with integrated stylus holder for Unitech handhelds
• Keeps stylus accessible during continuous scan workflows
• Adjustable for varied operator hand sizes and grip styles

Unitech · 5000-900009G

Unitech Unit ACC USB Spare BAT Char USB CAB - 5000-900009G

USB charging cable designed as a field-deployment spare for the MS852B 2D wireless barcode scanner

• USB charging cable for the Unitech MS852B wireless scanner
• Connects to grip-mounted charge contacts on the device
• Drop-in field spare for charging dock deployments

Unitech · 1550-905908G

Unitech USB 3.0 Type C Cable for PA760 and HT730 - 1550-905908G

USB 3.0 Type C cable built for the PA760 and HT730 mobile computers

• USB 3.0 Type-C cable for Unitech PA760 and HT730
• USB 3.0 data rates for firmware updates and sync
• Power delivery plus high-speed data on one cable

Unitech · 1550-900057G

Unitech USB Charging / Communication Cable 82" - 1550-900057G

N 82-inch (6.8-foot) USB Type A cable engineered for Unitech MS910 and MS912 mobile computers

• 82-inch USB-A cable for Unitech MS910 and MS912 handhelds
• Extended reach for warehouse and field charging routes
• Charge plus data sync on a single USB connection

Unitech · 5500-900098G

Unitech USB Dongle_2.4GHZ for MS836B/MS838B. - 5500-900098G

• 2.4 GHz USB dongle for Unitech MS836B and MS838B scanners
• Converts wired scanner to wireless via USB 2.0 or 3.0 host port
• Drop-in wireless adapter for legacy USB scanner integration

Unitech · 3210-900026G

Unitech WD200 Wrist Holder Kit (Bracket Strap Pad) - 3210-900026G

Wrist holder kit designed to mount the WD200 handheld scanner to the operator's wrist during inventory capture workflows

• Wrist holder kit for the Unitech WD200 wearable scanner
• Includes bracket, adjustable strap, and comfort pad
• Body-worn carry for hands-free inventory capture

Unitech · 5100-900030G

Unitech WD200P 4-SLOT Charging Cradle Power - 5100-900030G

4-bay charging cradle purpose-built for Unitech WD200 series mobile computers

• 4-bay charging cradle for Unitech WD200 mobile computer fleet
• Charges four handhelds simultaneously between shifts
• Drop-in dock for warehouse, retail, and field-service use

Unitech · 5100-900043G

Unitech WD200P Wrist Holder pad(10 pieces per - 5100-900043G

10-pack of replacement cushion pads for the WD200P wrist strap assembly

• Replacement cushion pad 10-pack for WD200P wrist strap
• Absorbs pressure during extended hand-mounted scanning
• Drop-in comfort pad for warehouse and retail use

Unitech · 5100-900044G

Unitech WD200P Wrist Holder strap(10 pieces per - 5100-900044G

Pack of ten WD200P wrist holder straps designed to secure Unitech mobile computers during active use

• Replacement wrist strap 10-pack for WD200P wrist mount
• Secures handheld scanners to operator wrists in field use
• Bulk pack for fleet maintenance and replacement