Lifesafety Power · FPV4-R8E1

Lifesafety Power FPV4-R8E1 4A 8 Lock Outputs

Dedicated access control power supply rated for 4A total output distributed across 8 independent relay outputs

• 4A at 12VDC across 8 relay outputs supports up to eight mag locks independently.
• Per-output fusing and supervision enables granular door-level fault diagnostics.
• 75W, 120VAC input simplifies single-enclosure power management for multi-door installs.

Lifesafety Power · FPV6-B100E1

Lifesafety Power FPV6-B100E1 4A/12V 4A/24V

Compact power distribution module designed for modest-scale IP security deployments where you need simultaneous 12VDC and 24VDC rails—common in

• Dual-rail 12 VDC and 24 VDC outputs at 4 A each eliminate a second power supply.
• 48 W on 12 V and 96 W on 24 V rails support cameras, readers, and door strikes.
• Compact wall-mount form factor suits single-door and small-system access deployments.

Lifesafety Power · FPV6-D8E1

Lifesafety Power FPV6-D8E1 6A 8 Auxillary Outputs

6-ampere regulated power supply designed to centralize backup power distribution across multi-device security installations

• 6A regulated output prevents voltage droop when camera resets and door strikes overlap.
• 8 independently supervised outputs let you isolate faults per device without system-wide impact.
• Battery backup integration enables graceful degradation so access control stays active during outages.

Lifesafety Power · FPV6-E1

Lifesafety Power FPV6-E1 FPV6-E1

Supervised power distribution module designed for access control and security system installations where supervised output circuits are required

• Supervised outputs detect open circuits, shorts, and power faults per zone.
• Designed for DIN rail or panel-mount integration in commercial security builds.
• Supports multi-zone power distribution for access control and alarm systems.

Lifesafety Power · FPV6-R8E1

Lifesafety Power FPV6-R8E1 6A 8 Lock Outputs

6-ampere power supply purpose-built to distribute power across eight independent lock outputs — a direct fit for multi-door access control

• Eight independent lock outputs isolate faults, preventing a single failure from cascading.
• 6A total capacity supports up to eight electric locks, mag-locks, or door strikes.
• Dedicated per-output power routing eliminates voltage sag across neighboring doors.

Lifesafety Power · K1E4-DOOR-BOXED

Lifesafety Power K1E4-Door-Boxed K1E4-Door-Boxed

Power supply unit designed to support door control and access management in security installations

• Operates at 24VDC to match standard electrified lock and reader voltage requirements.
• Centralizes door power distribution, reducing wiring complexity in multi-door deployments.
• Dedicated supply isolates door control power from the access panel for cleaner fault isolation.

Lifesafety Power · RC250B-C16P

Lifesafety Power RC250B-C16P RC250B-C16P

16-output regulated power supply designed for distributed security system installations where multiple devices require independent, supervised DC

• 16 independent supervised outputs let you isolate faults without taking down the full system.
• 250W at 24VDC supports mixed loads across cameras, readers, and strike locks from one enclosure.
• 230VAC input suits international and commercial-grade electrical panels without a step-down transformer.

Lifesafety Power · RC75-C8

Lifesafety Power RC75-C8 75W Single Voltage 120VIN

75W single-voltage power supply rated for 120VAC input

• 75W output supports 4–6 PoE cameras (10–15W each) or mixed camera and door-strike loads.
• 120VAC single-voltage input eliminates selector switches, simplifying field installation and verification.
• Compact enclosure fits DIN rail or fixed cabinet mounting, reducing footprint in crowded closets.

Lifesafety Power · RD150B-16

Lifesafety Power RD150B-16 RD150B-16

16-output supervised power supply designed to distribute and monitor power across distributed access control, alarm, and security subsystems in

• 16 supervised outputs detect wiring faults or load disconnects per channel.
• 300W at 24VDC supports medium-to-large campus access control and alarm loads.
• Per-output supervision cuts troubleshooting time and reduces unplanned downtime.

Lifesafety Power · RGA-XZ1-BOXED

Lifesafety Power RGA-XZ1-BOXED Boxed Power Systems 120 VAC 50/60

Compact boxed power distribution system rated for 120VAC 50/60Hz operation

• Accepts 120VAC 50/60Hz mains input for standard North American cabinet installs.
• Boxed enclosure centralizes power distribution, reducing cable clutter in rack deployments.
• Single enclosure manages multiple downstream devices for surveillance and access control.

Lifesafety Power · RGA75-C8Z

Lifesafety Power RGA75-C8Z RGA75-C8Z

75W redundant power supply designed to eliminate single points of failure in security and access-control installations

• 75W redundant output sustains access control and security loads without interruption.
• Dual independent 120 VAC inputs auto-switch to eliminate single points of mains failure.
• Integrated battery supervision enables remote monitoring of backup battery health and charge.

Lifesafety Power · RGM75B-C8PZ

Lifesafety Power RGM75B-C8PZ RGM75B-C8PZ

75W redundant power supply designed for surveillance installations requiring uninterrupted DC distribution across multiple cameras and ancillary

Lifesafety Power · RGS250-4D8

Lifesafety Power RGS250-4D8 GEMINI RG Rackmont

Rackmount power distribution unit designed for security integrations that require centralized, reliable 24VDC power delivery across multiple outputs

• Delivers 250W at 24VDC for multi-camera or access control loads from one rack unit.
• Rackmount form factor consolidates DC power alongside NVRs, switches, and control panels.
• Centralized fused distribution reduces voltage sag across distributed 24VDC endpoints.

Lifesafety Power · RGXM150-C8D8P

Lifesafety Power RGXM150-C8D8P 150W Single Voltage 120 VAC 8 Rel

150W single-voltage power supply built for access control and surveillance system integration where you need hardwired relay outputs to drive locks

• 150W at 120 VAC input consolidates power for up to 8 relay and 8 auxiliary outputs.
• 8 dry-contact relay outputs drive door strikes, locks, or alarm devices without adapters.
• 12 VDC regulated output supports multi-point access control and surveillance loads cleanly.

Lifesafety Power · RGXM150B-C8D8PZ1

Lifesafety Power RGXM150B-C8D8PZ1 RGXM150B-C8D8PZ1

150-watt regulated power supply designed for distributed security installations where multiple devices require stable DC power from a single

• 150W regulated output maintains stable DC voltage across mixed-device security loads.
• Centralized power distribution eliminates individual supplies at each endpoint device.
• Regulated design prevents voltage sag on analog CCTV and access control circuits.

Lifesafety Power · SD16-BOXED

Lifesafety Power SD16-BOXED 16 output network managed output boar

16-output network-managed power distribution board designed to centralize and monitor power delivery across multi-device IP security deployments

• 16 independently monitored outputs enable per-outlet fault detection without panel inspection.
• Remote outlet switching reduces truck rolls on distributed camera and access control installs.
• Single managed interface consolidates power supervision across multi-device IP security networks.

Middle Atlantic · 10125CHA

Middle Atlantic 1-1/4IN TRD SZ Cond Assy - 10125CHA

Middle Atlantic · 1/2BNC3

Middle Atlantic 1/2IN. In. BNC (3) Port Ucp Pnl - 1/2BNC3

3-port BNC modular panel designed for clean integration into specific Middle Atlantic rack systems

Middle Atlantic · 1/2BNC5

Middle Atlantic 1/2IN. In. BNC Rgbhv(5)Port Ucp - 1/2BNC5

5-port modular panel designed to terminate BNC RGBHV connections within compatible Middle Atlantic enclosure systems

Middle Atlantic · 1/4X2

Middle Atlantic 1/4IN. In. (2) Port Ucp Pnl - 1/4X2

2-module capacity Unloaded Connector Panel (UCP) designed to house and organize various AV and network connectors within compatible Middle Atlantic

Middle Atlantic · 10CTCBK

Middle Atlantic 10-IN Surf Cover Assy BK - 10CTCBK

Black surface-style cover assembly designed for the Evolution 10CTC poke-thru device series

Middle Atlantic · 10CTCBZ

Middle Atlantic 10-IN Surf Cover Assy BZ - 10CTCBZ

Bronze-finish surface-style cover assembly designed for the Evolution 10CTC poke-thru device family

Middle Atlantic · 10AP

Middle Atlantic 10-INCH Abandonment Plate - 10AP

10-inch abandonment plate designed to blank off unused conduit or wire-management openings in rack enclosures and wall-box installations

Middle Atlantic · 10BLH

Middle Atlantic 10IN Black Conduit Hsng - 10BLH

10-inch black conduit housing designed for cable management and conduit routing in rack and enclosure installations

Middle Atlantic · 1010CHA

Middle Atlantic 1IN TRD SZ Cond FD Assy - 1010CHA

1-inch trade size conduit feed assembly designed to provide a clean, managed entry point for conduit runs entering rack enclosures or equipment

Middle Atlantic · 1075CHA

Middle Atlantic 3.4IN TRD SZ Cond FD Assy - 1075CHA

Conduit feed door assembly sized for 3.4-inch trough raceway systems

Middle Atlantic · 1043B

Middle Atlantic Abandon PLT Assy 3 1/2 - 1043B

Brass blanking plate designed to cover unused openings in service fittings

Middle Atlantic · 1043S

Middle Atlantic Abandon PLT Assy 3 1/2IN - 1043S

Stainless steel blanking plate designed to provide a finished appearance for unused openings in their in-floor service fittings

Middle Atlantic · 1044B

Middle Atlantic Abandon PLT Assy 3 1/2IN - 1044B

Brass blanking plate designed to cover unused openings in their in-floor service fitting systems

Middle Atlantic · 1044S

Middle Atlantic Abandon PLT Assy 3 1/2IN - 1044S

Stainless steel blanking plate designed to cover openings in in-floor distribution systems

Middle Atlantic · 1045B

Middle Atlantic Abandon PLT Assy 3 1/2IN - 1045B

Brass blanking plate designed to cap unused 3-1/2-inch service fitting openings in in-floor raceway and service fitting systems

Middle Atlantic · 1045S

Middle Atlantic Abandon PLT Assy 3 1/2IN - 1045S

3-1/2-inch stainless steel abandon plate assembly designed to cap unused or decommissioned in-floor service fitting openings in the 1045/525 series

Middle Atlantic · 1046B

Middle Atlantic Abandon PLT Assy 3 1/2IN - 1046B

Brass blanking plate designed to cover unused openings in L-Series rack systems

Middle Atlantic · 1046S

Middle Atlantic Abandon PLT Assy 3 1/2IN - 1046S

Stainless steel blanking plate assembly designed for the 1046/525-series in-floor service fitting system

Middle Atlantic · 1043BPO

Middle Atlantic Abandon PLT Only 3 1/2IN - 1043BPO

Brass blanking plate designed to cap unused openings in 1043 and 525 series in-floor service fitting assemblies

Middle Atlantic · 1043SPO

Middle Atlantic Abandon PLT Pnly 3 1/2IN - 1043SPO

Stainless steel blanking plate designed to cover unused openings in their in-floor service fitting systems