Vertiv LV3020P-001 IP KVM Extender Transmitter, Dual VGA, USB, Audio
Overview
The LV3020P-001 is the transmitter unit for the Vertiv Avocent LV3000 series IP KVM extender system, designed to sit at the source machine and push dual VGA video, USB keyboard/mouse, and audio over a standard IP network to a remote receiver. If you're deploying KVM extension in a control room, broadcast facility, or server room where operators need full workstation access from a distance, this is the local-end component that makes it work — LV3020P-001 connects directly to the host PC via two 15-pin D-Type VGA ports and two USB Type B ports, then forwards signals across the LAN to the paired receiver unit.
Compatibility
This transmitter is specifically designed for use with the Vertiv Avocent LV3000 series KVM extender system and pairs with the corresponding LV3000-series receiver unit. Video output supports resolutions up to 1920x1200 at 60Hz (including 1080p), which covers the full range of standard VGA-connected workstations and dual-monitor setups. USB hub support covers both USB 1.1 and USB 2.0 peripherals — keyboards, mice, and basic HID devices are all supported, though high-bandwidth USB 3.0 devices are outside the spec. Power is supplied via a single 5V supply (included), so no separate power infrastructure is required at the transmitter end. For broader KVM switch and extender options, see the full category.
Installation Notes
The LV3020P-001 operates within a 32° to 104°F (0° to 40°C) ambient temperature range — standard for a climate-controlled equipment room but not suitable for uncontrolled industrial or outdoor environments. Physical footprint is compact at 6.4 x 3 x 2 inches, fitting easily on a desktop or shelf mount behind the source workstation. Unit carries CE, FCC, and UL agency approvals, confirming it meets baseline electrical safety and emissions standards for North American and European deployments. Connect VGA outputs from the host system to the two 15-pin D-Type ports, USB from host to the two Type B ports, apply 5V power, and configure the IP network path to the receiver per the LV3000 series setup guide.
