Ubiquiti UACC-OFC-M2-LULU-15M OM4 Fiber Patch Cable 15m
The Ubiquiti UACC-OFC-M2-LULU-15M is a 15-meter indoor OM4 multi-mode fiber patch cable built for high-speed optical backbone deployments. This duplex LC UPC fiber patch cable supports 10 Gigabit, 40 Gigabit, and 100 Gigabit Ethernet, making it suitable for data center, campus, and enterprise network environments where reliable optical connectivity is non-negotiable.
Key Features
- OM4 Multi-Mode Fiber Standard: OM4 backbone fiber handles up to 100G Ethernet over the distances typical in campus and data center runs—far beyond what older OM3 or OM2 can deliver. If you're building or refreshing a fiber backbone that needs to support current and near-future bandwidth demands without re-cabling, this is your baseline standard.
- LC UPC Connector Termination: LC UPC connectors on both ends integrate seamlessly with standard optical patch panels, switch ports, and third-party equipment using LC UPC termination. Avoid surprises with connector mismatch by confirming your equipment uses LC UPC (not LC APC or other variants) before ordering.
- 15-Meter Cable Length: The 15m run length bridges moderate distances—typical inter-floor backbone runs, equipment room to distant patch panel, or across a server row without excessive slack. If your run is significantly longer (50m+), plan for repeaters or additional equipment; if shorter, consider buying exact-length to reduce clutter and cable management complexity.
- Duplex Configuration: Two fiber strands in one cable jacket means bidirectional communication on a single physical run. This reduces the need for dual separate cables in space-constrained racks or conduit.
- Indoor Rated Jacket: Designed for controlled indoor environments (offices, data centers, equipment rooms). Do not use outdoors or in wet/temperature-extreme environments—use outdoor-rated cable for external runs or conduit installations in uncontrolled spaces.
- 10G, 40G, and 100G Capable: A single cable supports legacy 10G infrastructure, mid-range 40G deployments, and future-proof 100G Ethernet. This flexibility means the cable won't become obsolete as your network scales, reducing total cost of ownership across equipment lifecycle refreshes.
Integration & Compatibility
The UACC-OFC-M2-LULU-15M integrates with network infrastructure equipment featuring LC UPC optical ports—including Ubiquiti optical modules, data center switches, and third-party optical termination equipment. The OM4 standard ensures compatibility with existing multi-mode fiber backbone deployments. Verify your patch panels, equipment, and in-wall or conduit fiber plant support OM4 and LC UPC before deployment.
For integrators planning cabling infrastructure layouts, consider cable length runs, future bandwidth expansion, and physical routing through conduit or overhead trays. The 1.5 lb weight is negligible for ceiling or wall routing but should be factored into bundle weight when stacking multiple patch cables.
When to Choose a Different Model
If you need longer runs (50m+), investigate Ubiquiti's longer-length OM4 variants or OS2 single-mode fiber options for distance-insensitive, higher-capacity deployments. If your equipment uses LC APC connectors or ST/SC termination, you will need a different cable—confirming connector type before purchase is non-negotiable.
Frequently Asked Questions
Q: Is the UACC-OFC-M2-LULU-15M suitable for outdoor or conduit runs?
A: No. This cable is rated for indoor use only. Outdoor or conduit installations require outdoor-rated fiber cable with UV-resistant and temperature-stable jackets. Contact the manufacturer or your distributor for outdoor OM4 variants.
Q: What is the difference between OM4 and OM3 fiber?
A: OM4 supports higher bandwidth over longer distances than OM3. OM4 is rated for 100G Ethernet; OM3 is typically capped at 40G. If your infrastructure is OM3, the UACC-OFC-M2-LULU-15M will work but you won't realize the full 100G capability unless your backbone is upgraded to OM4 throughout.
Q: Can I use the UACC-OFC-M2-LULU-15M (often searched as UACC OFC M2 LULU 15M) with equipment using LC APC connectors?
A: No. LC APC and LC UPC are not compatible—they have different polish angles and will not mate securely. Verify your equipment uses LC UPC before purchase.
Q: What is the maximum distance for 100G Ethernet over this cable?
A: OM4 supports 100G Ethernet up to 150 meters. The 15m length on the UACC-OFC-M2-LULU-15M is well within this range, so you can deploy 100G without distance concerns for this run.
Q: Does this cable come with connectors installed, or do I need to terminate it myself?
A: The UACC-OFC-M2-LULU-15M ships fully terminated with LC UPC connectors already installed on both ends. No field termination or splicing is required—it's ready to patch immediately upon arrival.
Ted PerryPerspective based on aggregated and affiliated engineering team experience.
The Ubiquiti UACC-OFC-M2-LULU-15M is a purpose-built patch cable for integrators deploying 10G, 40G, or 100G multi-mode fiber backbones. OM4 is the right standard if you're building infrastructure that needs to absorb bandwidth growth without wholesale re-cabling in 3–5 years. The 15m length and pre-terminated LC UPC connectors eliminate field termination risk and reduce commissioning time on site.
Technical Highlights:
- OM4 Multi-Mode Fiber: Supports 100G Ethernet across the distances typical in campus and data center deployments (up to 150m per standard). OM3 cable running the same distance maxes out at 40G, so the OM4 standard is a genuine future-proofing investment.
- Pre-Terminated LC UPC Connectors: Ships ready to deploy—no field termination, no splicing, no guesswork on connector polish angle. Reduces installation labor and eliminates a common source of optical signal loss on site.
- 15m Run Length: Bridges moderate backbone distances (server rows to patch panels, inter-floor runs, equipment room spans). Longer runs need additional cable lengths or repeaters; shorter runs can be ordered as exact-length variants if you find slack management critical in dense racks.
Deployment Considerations:
- Confirm all termination equipment (patch panels, optical module ports, transceiver modules) uses LC UPC connectors before ordering. LC APC and LC UPC are not interchangeable.
- Indoor jacket only—do not use outdoors or in uncontrolled temperature environments. Outdoor backbone runs require UV-resistant cable variants.
- OM4 works backward-compatible with OM3 equipment, but you won't gain 100G performance unless the entire backbone is OM4 end-to-end.
Deploy the UACC-OFC-M2-LULU-15M when you're building or refreshing a multi-mode fiber backbone in a data center, campus facility, or enterprise environment where 100G Ethernet readiness is required now or in the immediate 3–5 year window. If your equipment base is exclusively 1G or 10G with no near-term upgrade path, OM3 is still adequate—but OM4 eliminates the need to re-cable when bandwidth demands accelerate.
