Ubiquiti UACC-OFC-M2-LULU-10M OM4 Fiber Patch Cable 10M
Overview
The UACC-OFC-M2-LULU-10M is a 10-meter indoor OM4 multimode fiber patch cable configured with duplex LC UPC connectors. This cable is engineered for high-density fiber backbone and equipment interconnect applications in enterprise networking, data center, and telecommunications infrastructure where low-loss, low-latency signal transmission is non-negotiable. OM4 multimode fiber supports high-speed data transmission across the moderate distances typical of campus and data center environments — making it a solid fit for core switch-to-router links, storage fabric interconnects, and rack-to-rack backbone runs where distances stay under 150 meters at 10 Gbps.
Key Features
- OM4 Multimode Fiber: Rated for 10 Gigabit Ethernet across up to 150 meters, OM4 delivers the speed and reach your data center or campus backbone needs without the cost of single-mode fiber and associated transceivers. This matters if you're building out a new core or refreshing existing links — OM4 future-proofs you for 40 and 100 Gbps runs over shorter distances.
- Duplex LC UPC Connectors: The dual LC UPC termination means you get two fiber strands (send and receive) in a compact, industry-standard form factor. LC connectors are the de facto standard in modern data center patch panels and equipment, so compatibility with existing infrastructure is guaranteed. The UPC (Ultra Physical Contact) polish delivers low back-reflection losses — important when you're stacking dozens of links in a high-density enclosure.
- 10-Meter Length: At 10 meters, this cable is purpose-built for intermediate horizontal distances within equipment rooms, between adjacent racks, or from a main distribution frame to a secondary frame. It's long enough to avoid strain and short enough to minimize modal dispersion and insertion loss — you won't be left chasing signal quality over unnecessary distance.
- Indoor-Rated Jacket: The standard indoor plenum or non-plenum jacket is suitable for telecommunications closets, server racks, and network distribution frames where exposure to direct sunlight, moisture, and temperature extremes is not a concern. If you need outdoor or harsh-environment routing, a different cable type (such as outdoor armored or ruggedized variants) is required.
- Ubiquiti Ecosystem Integration: This patch cable is designed for integration with Ubiquiti IP cameras, network switches, and other fiber-equipped infrastructure. It also works seamlessly with third-party equipment featuring LC UPC duplex fiber ports, making it a vendor-neutral choice for multi-vendor deployments.
- Low-Loss Performance: OM4 fiber is manufactured to tight tolerances that minimize insertion loss and maintain signal fidelity across high-speed links. In a data center where you may be connecting core switches or storage arrays, even a fraction of a dB matters — poor patch cables can cascade into link flaps or bit-error rate spikes.
Integration & Compatibility
The UACC-OFC-M2-LULU-10M integrates with any network equipment or network switches featuring duplex LC UPC fiber ports. This includes Ubiquiti switching and routing platforms, as well as third-party enterprise-grade gear from vendors like Cisco, Arista, Juniper, and others. The cable supports the full range of multimode protocols: Gigabit Ethernet (1GbE), 10 Gigabit Ethernet (10GbE), 40 Gigabit Ethernet (40GbE), and 100 Gigabit Ethernet (100GbE) over shorter distances. Refer to your equipment's specifications and the fiber network planning guide to confirm distance and speed compatibility for your specific link.
When to Choose a Different Model
If you need single-mode fiber for long-distance backbone links exceeding 150 meters, or if your equipment uses SC, ST, or other connector types, you'll need a different cable. Ubiquiti and other manufacturers offer single-mode variants and alternate connector options — consult the compatibility matrix for your core switch or router to determine the correct specification.
Frequently Asked Questions
Q: Can I use the UACC-OFC-M2-LULU-10M outdoors?
A: No. This cable is rated for indoor deployment only. Outdoor and direct-sunlight exposure require outdoor-rated fiber cable with UV-resistant jackets and armoring.
Q: What is the maximum transmission distance for the UACC-OFC-M2-LULU-10M?
A: OM4 multimode fiber supports 10 Gigabit Ethernet transmission up to 150 meters. For longer distances, single-mode fiber is required.
Q: Is the UACC-OFC-M2-LULU-10M compatible with non-Ubiquiti equipment?
A: Yes. The duplex LC UPC connectors are industry-standard. The cable will integrate with any equipment featuring LC UPC fiber ports, including switches and routers from Cisco, Arista, Juniper, and other vendors.
Q: What is the difference between UPC and APC connectors?
A: UPC (Ultra Physical Contact) connectors have a flat polish and lower back-reflection losses suitable for most data center applications. APC (Angled Physical Contact) connectors have an 8-degree angle and are used in long-distance single-mode deployments where back-reflection must be minimized further. For your multimode data center links, UPC is the correct choice.
Q: Does the cable include strain relief or a boot?
A: The UACC-OFC-M2-LULU-10M ships with standard LC UPC connectors and industrial-grade strain relief typical of enterprise-grade patch cables. Exact mechanical details are best confirmed with the product datasheet or by contacting the vendor.
Ted PerryPerspective based on aggregated and affiliated engineering team experience.
The UACC-OFC-M2-LULU-10M is a straightforward, no-frills fiber patch cable designed for one job: moving traffic across your data center backbone or campus fiber plant at 10 Gbps or better without signal degradation. OM4 multimode fiber paired with standard LC UPC connectors gets you industry-standard performance at a fraction of the cost and complexity of single-mode solutions — and for distances under 150 meters, you don't need anything more.
Technical Highlights:
- OM4 Multimode Specification: Certified for 10 Gigabit Ethernet across 150 meters, with headroom for 40 Gbps and 100 Gbps over shorter runs (25 and 10 meters respectively). That means your 10 GbE core links won't be starved for bandwidth, and if you refresh your equipment later, the cable is already future-proofed for higher speeds.
- LC UPC Duplex Termination: The two-fiber duplex LC UPC connector is the de facto standard in modern data centers. Low back-reflection losses (typically -50 dB or better) mean you won't introduce unnecessary signal noise into your links — critical when you have dozens of cables bundled in a single patch panel.
- 10-Meter Length at Optimal Distance: Long enough to route between racks without strain, short enough to avoid modal dispersion penalties. This is the sweet spot for horizontal interconnects; longer runs invite unnecessary attenuation, and shorter runs waste money on cable you don't need.
Deployment Considerations:
- Indoor-rated jacket only — no UV or moisture protection. If your cable path crosses a loading dock, rooftop, or outdoor conduit, you need outdoor or armored variants instead.
- Duplex LC connectors are common in enterprise switching but less common in some telco and carrier equipment. Verify your termination requirements before ordering — a wrong connector type is a wasted shipment.
- OM4 is the right choice for campus and data center backbones under 150 meters. If you're running links longer than that (e.g., between buildings more than 150 meters apart), switch to single-mode fiber and appropriate transceivers; multimode will fail you at that distance.
Deploy the UACC-OFC-M2-LULU-10M in high-speed data center switching fabrics, core-to-aggregation links, and campus backbone runs where Gigabit and multi-gigabit Ethernet is the standard and distances stay short. This is a no-surprises cable — it does exactly what OM4 multimode fiber is supposed to do, no more, no less.
