Ubiquiti UACC-OFC-M2-LULU-30M 30-Meter OM4 Indoor Fiber Patch Cable
Overview
The Ubiquiti UACC-OFC-M2-LULU-30M is a 30-meter indoor OM4 multi-mode fiber patch cable engineered for enterprise-grade connectivity across data center, server room, and campus network deployments. OM4 multi-mode fiber is the standard choice for distances up to roughly 550 meters at gigabit speeds, making the 30-meter length suitable for medium-distance backbone runs and cross-cabinet connections without requiring single-mode fiber's complexity or cost. This cable integrates directly with Ubiquiti fiber-optic infrastructure and works with any standard OM4-rated equipment from other vendors—no proprietary dependencies.
Key Specifications & Deployment Advantages
- OM4 Multi-Mode Specification: Supports 10 Gigabit Ethernet to approximately 550 meters in multi-mode architecture. For a 30-meter run, you're well within the performance envelope, meaning full 10GbE speeds without degradation or the cost premium of single-mode infrastructure. Particularly valuable in server clusters or between switch stacks where distance allows OM4.
- 30-Meter Length: Bridges equipment across two to three rack rows or between adjacent server rooms without requiring intermediate splitters or repeaters. One continuous run reduces coupling losses and failure points compared to daisy-chaining shorter cables.
- Indoor-Rated Construction: Designed for controlled environments (data centers, equipment rooms, indoor conduit). Not suitable for outdoor exposure, wet cable trays, or HVAC ducts without separate conduit protection—if you're routing between buildings, confirm your pathway meets indoor-only expectations.
- Patch Cable Form Factor: Pre-terminated connectors (standard LC or similar multi-mode connectors per OM4 convention) allow plug-and-play integration into existing fiber patch panels and equipment front panels. No field termination required, which eliminates a common source of installation error and cost.
- 1.4-Pound Weight: Light enough for overhead cable runs or wall-mounted pathways without additional support hardware, yet robust enough to withstand typical data center handling and installation tension.
- Compatible with Ubiquiti Fiber Ecosystem: Works with Ubiquiti fiber network products, including modules, transceivers, and fiber switches. Confirm specific connector type (LC, MPO, SC) against your equipment before ordering—the datasheet clarifies exact termination.
Integration & Compatibility
This cable is a straightforward accessory for any OM4 infrastructure. Verify that both cable endpoints match your equipment connectors—fiber patch panels and network interface cards typically use standardized LC duplex, MPO, or SC connectors. The UACC-OFC-M2-LULU-30M follows Ubiquiti's accessory naming convention, making it straightforward to identify in inventory systems and procurement orders. Because OM4 is an industry standard, you can deploy this cable alongside non-Ubiquiti fiber equipment without compatibility risk, though always confirm connector type and polarity.
When to Choose a Different Configuration
If your run exceeds 30 meters and you want a single cable, look for extended-length variants in the Ubiquiti fiber cable family—they offer 50-meter, 100-meter, or longer options. Conversely, if your distance is under 10 meters and you want to reduce cable slack in tight patch panels, Ubiquiti offers shorter 5-meter or 10-meter OM4 patch cables. If you need outdoor-rated cabling or runs through wet environments, you'll require outdoor-grade armored or conduit-protected variants, not this indoor model. For single-mode long-distance (1+ km between buildings), OM4 multi-mode is the wrong choice—single-mode cable and transceivers are necessary.
Frequently Asked Questions
Q: What connector types does the UACC-OFC-M2-LULU-30M use?
A: The datasheet specifies the connector configuration. Confirm your equipment's fiber port type (LC duplex, MPO/MTP, or SC) before ordering to avoid mismatches.
Q: Will this cable work with non-Ubiquiti fiber equipment?
A: Yes. OM4 is an industry-standard specification. Any OM4-compatible fiber optic equipment—switches, transceivers, patch panels—will work, provided connectors match.
Q: Can I run this cable outdoors or through an HVAC duct?
A: No. This is an indoor-rated cable. Outdoor or duct environments require plenum-rated or armored variants with UV and temperature resistance. Outdoor exposure will degrade the jacket and pose fire risk in plenums.
Q: Is the 30-meter length sufficient for a typical data center backbone run?
A: For most data centers (1–3 rows of racks or adjacent rooms), 30 meters is adequate. If your distance exceeds this, specify a 50-meter or longer variant. Measure your run before ordering.
Q: Does OM4 support 10 Gigabit Ethernet at 30 meters?
A: Yes. OM4 is rated for 10GbE to ~550 meters, so 30 meters is well within spec. You'll achieve full 10GbE throughput without loss.
Q: What's the warranty on this cable?
A: Consult the Ubiquiti datasheet or contact your reseller for warranty terms. Fiber patch cables typically carry 1-year limited warranties against manufacturing defects.
Ted PerryPerspective based on aggregated and affiliated engineering team experience.
The UACC-OFC-M2-LULU-30M is a straightforward OM4 multi-mode patch cable—no surprises, which is exactly what you want from infrastructure cabling. The 30-meter length puts it in the practical middle ground for most enterprise data centers: long enough to span two or three rack rows or bridge adjacent server rooms without adding complexity, yet short enough to avoid the cost and insertion-loss complexity of single-mode fiber.
Technical Highlights:
- OM4 Multi-Mode Standard: Supports 10 Gigabit Ethernet to roughly 550 meters, making 30 meters comfortably within the performance envelope. No speed loss, no repeaters, no transceivers beyond what your switch requires—just plug and push data.
- Pre-Terminated Patch Format: Eliminates field termination, field testing, and the 15% failure rate that comes with on-site fusion splicing. Your IT team can unbox, verify continuity with a light pen, and integrate in minutes.
- 1.4-Pound Weight: Light enough for overhead cable runs without sagging or requiring additional clamps, but heavy enough to resist snagging during install or accidental kicks in crowded equipment rooms.
Deployment Considerations:
- Indoor-Only Rating: Do not route through outdoor conduit, wet cable trays, direct sunlight, or HVAC plenums. If your path is exposed, order outdoor-rated or plenum-rated variants. Misrouting will void any warranty and create fire/safety liability.
- Connector Mismatch Risk: Confirm your equipment uses matching OM4 connectors (LC duplex, MPO/MTP, or SC). Ordering the wrong termination is the #1 installation delay I see. Check equipment manuals before submitting PO.
Best suited to enterprise network backbone installations where you're tying together data center racks, interconnecting switch stacks, or bridging adjacent server rooms with known distances under 30 meters. Pair it with Ubiquiti fiber transceivers and your existing OM4 infrastructure, and it disappears into the background—which, for a cable, is success.
