Ubiquiti UACC-OFC-S2-LULU-5M 5-Meter Fiber Patch Cable
Overview
The UACC-OFC-S2-LULU-5M is a lightweight fiber patch cable engineered for high-speed network backbones and access layer deployments. This 5-meter cable is rated for 100G-capable connectivity, making it suitable for linking Ubiquiti fiber-enabled switches, routers, and network appliances across data centers, enterprise campuses, and edge deployments. The lightweight construction reduces cable management overhead—important when you're handling dozens of fiber runs through cable trays and conduit.
Key Features
- 5-Meter Length: Bridges medium-distance fiber runs without requiring splicing or excessive slack; reduces cost compared to longer spools while avoiding the expense of multiple shorter cables for standard 5m rack-to-rack distances.
- 100G-Rated Capacity: Designed to handle 100 Gigabit Ethernet speeds, so you won't hit bandwidth limits as traffic grows; future-proofs your network against capacity scaling without replacement.
- Lightweight Design: Lower weight and smaller bend radius than traditional fiber patch cables means easier routing through crowded cable management systems and reduced strain on patch panels during installation and maintenance.
- Ubiquiti Ecosystem Compatibility: Direct integration with Ubiquiti fiber-enabled equipment eliminates compatibility guessing; port types and connector standards align with UniFi switching and routing appliances.
- Indoor and Structured Cabling Rated: Suitable for temperature-controlled data center and office environments; meets fire and safety codes for indoor plenum installations where building codes require flame-retardant cabling.
Integration and Compatibility
The UACC-OFC-S2-LULU-5M (often searched as UACC OFC S2 LULU 5M) connects directly to Ubiquiti fiber-enabled switches, routers, and appliances. Before deployment, confirm port type compatibility with your target equipment—verify that both ends of your patch run support the same connector standard (typically LC or similar Ubiquiti-standard fiber connectors). This cable is designed for structured cabling environments where environmental stability is maintained, so avoid outdoor or exposed applications; for exterior fiber runs, choose outdoor-rated variants with UV and moisture protection.
Deployment Context
Use the UACC-OFC-S2-LULU-5M for fixed rack-to-rack or cabinet-to-cabinet connections within a single facility. Common scenarios include linking fiber-enabled access points to central switches, connecting redundant WAN uplinks, or building 100G backbone segments between data center zones. The 5-meter length suits standard 19-inch rack spacing (roughly 10–12 feet between cabinet rows in a typical data center floor plan). If your run exceeds 5 meters, plan for multiple cables with proper slack management; if you need shorter runs (under 2 meters), consider whether shorter variants or pre-terminated pigtails would reduce waste and assembly time.
What's in the Box
1x UACC-OFC-S2-LULU-5M Fiber Patch Cable (5 meters).
Ted PerryPerspective based on aggregated and affiliated engineering team experience.
The UACC-OFC-S2-LULU-5M is a straightforward, purpose-built component for Ubiquiti fiber backbone work. A 5-meter 100G-rated fiber patch cable sounds simple, but the lightweight construction and strict compatibility with Ubiquiti's ecosystem are what make it worth considering over generic off-the-shelf fiber—you avoid integration surprises and cable management headaches.
Technical Highlights:
- 100G Throughput Rating: Designed for modern high-speed switching (100 Gigabit Ethernet), which means you're not leaving performance on the table for a sub-50G application; if you're deploying Ubiquiti fiber switches, this cable is built to match their capability ceiling.
- Lightweight Profile: Reduces mechanical stress on patch panel connectors and simplifies recabling during maintenance or expansion; lower weight per unit length also cuts labor time when managing runs through overcrowded cable trays.
- 5-Meter Standard: Matches typical data center cabinet spacing without requiring splicing or excessive cable loops; reduces waste versus longer spools and is more cost-effective than buying multiple shorter runs.
Deployment Considerations:
- Verify connector type compatibility before ordering—Ubiquiti fiber equipment uses specific connector standards; mismatched connectors will result in failed links.
- Do not use outdoors or in uncontrolled temperature environments; this is a structured cabling product, not a ruggedized field cable. If you need fiber runs outside or between buildings, order an outdoor-rated variant instead.
- Plan cable slack carefully in high-density rack environments; even lightweight fiber can kink if bent below its minimum bend radius, which will degrade or break the signal.
Deploy the UACC-OFC-S2-LULU-5M in data centers and enterprise campuses where Ubiquiti fiber infrastructure is the backbone choice. It's a solid match for 100G inter-switch links and redundant WAN uplinks where equipment compatibility and cable management efficiency directly impact operational stability.
Frequently Asked Questions
Q: Is the UACC-OFC-S2-LULU-5M compatible with non-Ubiquiti fiber equipment?
A: The cable itself is a standard fiber patch cable, so it will work with any equipment that accepts the same connector type. However, the UACC-OFC-S2-LULU-5M is engineered and tested specifically for Ubiquiti fiber-enabled devices. For non-Ubiquiti equipment, verify connector compatibility with the target equipment manufacturer before purchase.
Q: What is the maximum bend radius for the UACC-OFC-S2-LULU-5M?
A: The lightweight design permits tighter bends than traditional fiber, reducing cable tray footprint. For exact specifications, refer to the product datasheet; do not bend below the manufacturer's specified minimum radius, as this can cause signal loss or cable damage.
Q: Can I use the UACC-OFC-S2-LULU-5M outdoors?
A: No. This cable is rated for indoor and structured cabling environments only. For outdoor or inter-building fiber runs, order an outdoor-rated fiber cable variant designed for UV exposure and temperature extremes.
Q: What connector types does the UACC-OFC-S2-LULU-5M use?
A: Confirm the exact connector standard (typically LC, SC, or another Ubiquiti-standard fiber connector) by checking your target equipment's port specification before ordering. Mismatched connectors will prevent successful linking.
Q: Is the cable pre-terminated?
A: Yes. The UACC-OFC-S2-LULU-5M comes fully assembled and ready to deploy. No field termination is required—simply connect both ends to compatible equipment ports.
Q: How does the 5-meter length compare to other common fiber patch cable sizes?
A: The 5-meter length is a standard rack-to-rack distance in data centers and enterprise cabinets (typically 10–15 feet apart). If you need shorter runs, consider 2-3 meter variants; if longer, plan multiple cables with proper slack to avoid kinking.
