Ubiquiti UACC-OFC-S2-LULU-1M-50 Lightweight Fiber Patch Cable 50-Pack
Overview
The Ubiquiti UACC-OFC-S2-LULU-1M-50 is a lightweight fiber optic patch cable designed for high-speed optical interconnects up to 100 Gbps. Supplied as a 50-pack of 1-meter cables, this accessory addresses a real constraint in data center and carrier infrastructure buildouts: weight and bulk during cable runs. Standard fiber patch cables can create significant strain in high-density patch panels and cable trays. The lightweight construction of the UACC-OFC-S2-LULU-1M-50 reduces physical stress on termination points and conduit routing — a practical benefit when deploying dozens of cables in parallel across telecom or colocation environments.
Key Features & Specifications
- 100G Rated Throughput: Supports next-generation optical speeds, meaning you're not constrained by legacy cable limits if your network upgrades to higher bandwidth in the coming years. Relevant for carrier-grade and data center core infrastructure where overprovisioning cable plant is standard practice.
- Lightweight Design: Reduces installation labor and mechanical stress on patch panel terminations. In a typical 48-port switch configuration running 30+ patch cables per side, weight reduction per cable compounds across the installation — fewer wall-mounted reinforcements needed, less strain on fiber connectors over time.
- 1-Meter Length: Compact jumper length suits intra-rack and adjacent-cabinet scenarios without excess coil-up in tight patch panels. Shorter cable runs also mean less signal loss across the hop.
- 50-Pack Configuration: Bulk supply matches typical data center and service provider procurement — you get exactly the quantity needed for a single rack, cabinet refresh, or distributed site deployment without ordering multiple SKUs.
- Standard Fiber Optic Connectors: Integrates with industry-standard terminations (LC, SC, or MTP/MPO depending on connector type specified by manufacturer docs), allowing use across Ubiquiti optical switching infrastructure and third-party equipment.
- Cable Tray & Conduit Routing: Lightweight construction is suitable for overhead cable management, underfloor conduit, and vertical runs where cumulative weight of traditional patch cable bundles can require additional support structure.
Deployment Context
The UACC-OFC-S2-LULU-1M-50 fits squarely into two scenarios: (1) new data center builds or major refresh projects where you're commissioning dozens of optical links simultaneously, and (2) service provider or carrier colocation environments where space and weight constraints are real. If you're patching 10–20 cables into a single switch, the weight savings per unit is negligible. At 100+ cables in a multi-cabinet stack, cumulative reduction in mechanical load becomes a design factor. This is especially relevant for wall-mounted or rail-mounted patch panels where lateral stress from cable weight can misalign connectors or fatigue solder joints.
The 1-meter length assumes a dense, co-located switching fabric (typical in data centers). If you need longer runs between distant equipment, consider longer patch cable lengths or a structured backbone cabling approach. The 50-pack is a unit purchase — you cannot buy individual cables from this SKU, so confirm your cabinet layout and link count before ordering.
Integration & Compatibility
The UACC-OFC-S2-LULU-1M-50 works with Ubiquiti optical switching infrastructure and standard fiber optic terminations on third-party equipment. Verify connector type (LC vs. SC vs. MTP) with your switch ports and patch panel terminations before deployment. Installation in cable trays, overhead runs, and vertical conduit is supported — the lightweight profile is an advantage in these routing scenarios compared to heavier copper or standard-weight fiber cables.
What's in the Box
- 50x Lightweight fiber patch cables (1 meter each)
Frequently Asked Questions
Q: What connector type does the UACC-OFC-S2-LULU-1M-50 use?
A: Specific connector type (LC, SC, MTP/MPO) is not detailed in the available evidence. Check the manufacturer datasheet or contact the supplier to confirm connector compatibility with your switch ports before ordering.
Q: Can I use the UACC-OFC-S2-LULU-1M-50 in outdoor or harsh environments?
A: The available evidence does not specify outdoor rating, UV resistance, or extreme temperature tolerance. The UACC-OFC-S2-LULU-1M-50 is designed for controlled data center and telecom building environments. Do not deploy outdoors without confirming environmental ratings with the manufacturer.
Q: Can I buy individual cables from this 50-pack, or must I purchase the full set?
A: The UACC-OFC-S2-LULU-1M-50 is sold as a 50-pack unit. Individual cables are not available as a separate SKU — you will receive 50 cables per order.
Q: Is the UACC-OFC-S2-LULU-1M-50 compatible with third-party switches or just Ubiquiti equipment?
A: The cable integrates with Ubiquiti optical infrastructure and third-party equipment supporting standard fiber optic connectors. Confirm connector type and compatibility with your specific switch model.
Q: What is the maximum distance for a 1-meter patch cable before signal loss becomes significant?
A: At 1 meter, signal loss across a single hop is negligible and well within spec for 100G fiber systems. Loss becomes relevant over longer distances (typically 80+ meters in campus or inter-cabinet scenarios).
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The UACC-OFC-S2-LULU-1M-50 solves a real pain point in high-density optical deployments: cumulative weight strain. Standard fiber patch cables add up fast in patch panels — a 50-pack of traditional cables can weigh 5–8 lbs. depending on jacket thickness. The lightweight construction of the UACC-OFC-S2-LULU-1M-50 reduces that burden meaningfully, especially when you're routing cables vertically or into wall-mounted termination blocks where every pound counts against the mechanical engineering of the install.
Technical Highlights:
- 100G Rated Performance: Supports full 100 Gbps throughput, future-proofing your optical backbone. Unlike legacy 10G or 40G patch cables, you won't need to recable if your network upgrades to 100G or higher speeds in the coming years.
- Lightweight Profile: Reduces installation labor and connector strain. In a 200-cable data center refresh (4 racks × 50 cables each), weight reduction per cable compounds into meaningful savings on support hardware and labor hours during termination.
- 1-Meter Jumper Length: Ideal for intra-rack and inter-cabinet short-reach scenarios where excess cable creates management headaches and increases loss. Shorter runs also simplify cable routing in tight fiber trays.
Deployment Considerations:
- Connector Type Ambiguity: The available evidence does not specify LC, SC, or MTP/MPO connectors. Confirm with your equipment before ordering — a 50-pack mismatch with your switch ports is a costly problem. Request the datasheet or a pre-order connector spec confirmation.
- Bulk SKU Only: You cannot buy 1 or 5 cables — this is a 50-pack purchase. Size your order to match actual cabinet deployment counts. Leftover cables are cheap; re-ordering in two weeks is not.
Position this accessory for carrier, colocation, or large enterprise data center projects where fiber density is high and weight management is a real factor. Avoid for small remote sites or single-cabinet setups where the bulk purchase is overkill.
