TP-Link EAP725-WALL BE5000 Wall-Plate Wi-Fi 7 Access Point

Overview

The EAP725-WALL is a dual-band Wi-Fi 7 wall-plate access point built for dense office, retail, and commercial indoor deployments where you need to minimize visible infrastructure. It mounts directly into standard US junction boxes, solving the retrofit problem: no separate enclosure, no ceiling clutter. The 5 GHz band delivers 4324 Mbps throughput — enough to handle concurrent video conferencing, file transfers, and real-time data across 128 concurrent clients per band without bottlenecking. The 2.4 GHz band adds 688 Mbps for legacy and IoT devices. A 2.5G uplink Ethernet port connects to your network backbone; two 1G downlink ports with PoE passthrough feed wired devices (cameras, readers, access control panels) without consuming uplink capacity. Power comes via 802.3bt PoE (90W maximum), eliminating the need for separate electrical runs.

Compatibility

The EAP725-WALL integrates with the TP-Link Omada SDN ecosystem — controllers, managed switches, and gateways. It works alongside other Omada-series access points for centralized provisioning, band steering, and load balancing across multi-unit deployments. Wired downlink ports support standard PoE-powered IP cameras, access control readers, and network switches without reconfiguration. Backward-compatible with IEEE 802.11 a/b/g/n/ac/ax/be clients — no client-side upgrades required.

Installation Notes

Designed for wall-mounting in standard US electrical boxes (kits included). Operating temperature range 0°C–40°C (32°F–104°F); do not install in uncontrolled outdoor environments or high-heat mechanical rooms. Dual internal antennas with 2× 4dBi (2.4 GHz) and 2× 5dBi (5 GHz) provide adequate coverage for medium-sized rooms (2,500–3,500 sq ft depending on wall density). RJ45 connectors are standard; use Cat6A or better cabling to maximize 2.5G throughput. Supports 16 SSIDs (8 per band), WPA3 encryption, wireless client isolation, VLAN tagging, and rogue AP detection via Omada controller.

What's in the Box

• 1× EAP725-WALL access point
• 1× wall-mounting kit (brackets, fasteners)
• 1× RJ45 cable