Middle Atlantic PDT-1615C-NS Thin Vertical Rack Power Strip, 16-Outlet 15A
Overview
The Middle Atlantic PDT-1615C-NS is a thin vertical rack-mount power distribution unit from the PDT Series, delivering 16 NEMA 5-15R outlets at 120V AC with a 15A circuit breaker — the right answer when a rack full of NVRs, switches, encoders, or access control panels needs clean, distributed AC without eating valuable 1U or 2U of horizontal shelf space. At 1800W total capacity across all 16 outlets, it handles mixed-load racks without oversubscription concerns on standard 15A branch circuits. The 9-ft, 12 AWG power cord reaches floor-mount PDUs or wall receptacles without extension cords, and the thin vertical profile mounts to the rack's interior side channel, keeping the equipment bays fully accessible. UL Listed for commercial and light-industrial installation environments.
Compatibility
Designed for standard 19-inch equipment racks and rack enclosures that include vertical power mounting channels — common in Middle Atlantic's own Middle Atlantic rack enclosures and compatible open-frame or enclosed rack systems from other manufacturers using the same side-channel mounting standard. Outlet count and NEMA 5-15R receptacle type suit low-to-medium draw 1U devices: PoE network switches, NVRs, video encoders, access control panels, and IP intercom controllers. Total 1800W / 15A capacity aligns with a single standard 15A branch circuit — confirm aggregate device draw stays under 80% of circuit rating (1440W) per rack power distribution best practices. Not rated for 20A circuits or 240V loads; select the appropriate higher-amperage PDU variant if your equipment draw exceeds that threshold.
Installation Notes
Mounts vertically inside the rack side channel — verify your enclosure includes a compatible vertical mounting rail before ordering. The 33.875-inch length accommodates most standard rack depths; confirm clearance against rear cable management panels. Input plug is NEMA 5-15P; connect directly to a 15A dedicated branch circuit. Do not daisy-chain to another PDU or power strip. 12 AWG cord gauge supports the full 15A rated load without voltage drop on runs up to 9 ft.
