STI EP101006-T EnviroArmour Polycarbonate Controller

Overview

The EP101006-T is a TCP/IP-enabled access control controller packaged in an injection-molded polycarbonate enclosure (RAL 7035 light gray finish). It manages up to 7 doors in networked multi-door deployments where you need environmental durability without metallic cabinet bulk. The polycarbonate construction resists corrosion, impact, and weather exposure — a practical choice for institutional facilities, commercial buildings, and outdoor-adjacent installations. Sound output is rated at 44dB(A), keeping audible feedback at acceptable levels in occupied spaces. UL/cUL certified per EP242410-O, meeting North American electrical and safety codes for access control enclosures.

Compatibility

The EP101006-T integrates with standard networked access control systems requiring TCP/IP management across 7-door zones. It supports conventional door strike and reader wiring — compatible with electromagnetic locks, card readers, keypad inputs, and relay outputs across standard access control architectures. Designed for integrators deploying centralized management infrastructure where multiple controllers report to a master control station over Ethernet. Not a standalone device; pairs with networked management software and reader hardware appropriate to your credential strategy (card, PIN, biometric).

Installation Notes

Conduit entry follows standard electrical practice: cut hub holes (size varies by conduit diameter — 7/8" hole for ½" hub, 1 1/16" for ¾", 1 ¼" for 1", scaling up to 2 3/8" for 2" conduit) on the enclosure face or side as wiring layout dictates. Use a Greenlee cutter positioned inside the enclosure, punching outward for clean entry. For metallic conduit, secure the connector hub into the hole with locknut, then attach grounding bushings with proper ground wire lug over the locknut. For non-metallic conduit, no grounding bushing is required — align conduit to prevent unnecessary stress on the polycarbonate walls. Ground all equipment per applicable electrical code (Canadian Electrical Code applies in Canada; US installations follow NEC). Device mounting plate is internal; secure your control board and terminal strips to prevent movement during wiring or thermal cycling.

What's in the Box

• 1x EP101006-T polycarbonate enclosure with mounting plate
• 1x device ground wire terminal
• Installation documentation (conduit, grounding, dimensional templates)