Sensors & IoT
Showing Results for Sensors & IoT
-
Optex
SKU: SIP-3020
Optex SIP-3020 Smart Intelligent PIR Detector
- Network-connected outdoor PIR detector for IP security platforms
- Operates -40 to 60 degrees C for harsh-climate perimeter installs
- IP66-rated housing - ONVIF Profile S, Milestone, AXIS Camera Station
$756.00 $598.99 Save $157.01The item has been added -
Optex
SKU: SIP-3020WFI
Optex SIP-3020WFI Smart Intelligent PIR Detector
SIP IP intercom station with two-way audio over standard Ethernet
- SIP-based two-way audio endpoint over standard Ethernet networks
- Compatible with enterprise telephony and soft-switch platforms
- Wall-mount form factor for entry and intercom station deployments
$1,120.00 $877.99 Save $242.01The item has been added -
Optex
SKU: SIP-4010
Optex SIP-4010 Smart Intelligent PIR Detector
IP network motion sensor with ONVIF compliance for enterprise VMS
- Network outdoor PIR sensor with ONVIF Profile S integration
- Modular sensor lets you reuse existing IP video and VMS architecture
- Drops into Ethernet infrastructure - no separate alarm bus needed
$756.00 $592.99 Save $163.01The item has been added -
Optex
SKU: SIP-4010WF
Optex SIP-4010WF Smart Intelligent PIR Detector
Wireless outdoor PIR detector with IP65 weather resistance for perimeter security
- Wireless outdoor PIR detector eliminates hardwired install runs
- Outdoor-rated 115 x 90 x 55 mm housing for wall and pole mount
- Drops onto REDWALL-compatible security platform architectures
$840.00 $658.99 Save $181.01The item has been added -
Optex
SKU: SIP-4010WFI
Optex SIP-4010WFI Smart Intelligent PIR Detector
Wireless indoor PIR motion sensor on REDWALL protocol for commercial spaces
- Indoor wireless PIR sensor for REDWALL security system integration
- Wireless install cuts low-voltage cable pulls to remote rooms
- Drops onto existing REDWALL-compatible video and alarm platforms
$1,120.00 $877.99 Save $242.01The item has been added -
Optex
SKU: SIP-404
Optex SIP-404 REDWALL Smart Intelligent PIR Detector
- Narrow-beam outdoor PIR creates 40m x 4m detection curtain
- Fence-line and corridor coverage without crossing-zone false alarms
- BS8418-compliant - 1.4 kg compact 248 x 102 x 266 mm housing
$756.00 $592.99 Save $163.01The item has been added -
Optex
SKU: SIP-5030
Optex SIP-5030 REDWALL Smart Intelligent PIR Detector
- Wide-area outdoor PIR blankets 50 x 30m (164 x 98 ft) per unit
- Single-unit yard and parking-lot coverage cuts installation count
- BS8418-compliant 1.4 kg housing - 60-second warm-up to active
$1,319.00 $1,032.99 Save $286.01The item has been added -
Optex
SKU: SX-360Z
Optex SX-360Z Perimeter Detection Sensor
Hardwired outdoor perimeter sensor with field-adjustable detection range
- 360-degree perimeter detection sensor for outdoor coverage zones
- 24VDC hardwired to alarm panels - no PoE infrastructure required
- Fence-line, pole, or wall mount for varied install geometry
$133.00 $104.99 Save $28.01The item has been added -
Optex
SKU: VXS-RAMI
Optex VXS-RAMI Outdoor PIR Detector
Outdoor PIR detector with 40ft wide angle and 5 range settings
- Outdoor PIR with 40 ft default and 5 adjustable coverage positions
- Anti-masking detects attempts to obscure the sensor face
- 24 mA draw at 3-9 VDC for low-power battery and wired panel installs
$504.00 $398.99 Save $105.01The item has been added -
Optex
SKU: WXS-RAMI
Optex WXS-RAMI Wireless PIR Detector
Wireless PIR motion detector for perimeter and interior security
- Wireless PIR motion detector with anti-masking battery operation
- IP55 housing for protected outdoor and damp-indoor placement
- Drops into standard wireless alarm panel sensor architecture
$429.00 $340.99 Save $88.01The item has been added -
Speco Technologies
SKU: O2TML
Speco Technologies O2TML 8" 2MP Temp Reading Panel w/ Face Mask
8-channel thermal panel with 2MP and face/mask detection for screening
- Eight simultaneous 2MP (1280×800) thermal channels consolidate multi-point screening.
- IP66-rated housing operates from -20°C to +60°C for indoor or outdoor deployment.
- H.265 compression with face/mask detection analytics reduces bandwidth and storage load.
$3,074.05 $1,695.99 Save $1,378.06The item has been added -
Add to Cart The item has been addedUbiquiti
SKU: UP-SENSE
Ubiquiti UP-SENSE UniFi Protect Smart Sensor
Wireless multi-sensor for UniFi Protect with Bluetooth 5.0 connectivity
- Bluetooth 5.0/BLE eliminates PoE runs, accelerating retrofit deployments in occupied facilities.
- Compact ⌀24 × 83.5 mm, 50.2 g body mounts adhesively on walls or corners without structural prep.
- NDAA-compliant with FCC, IC, CE, and Anatel certifications, supporting regulated installations.
$60.99The item has been added -
Add to Cart The item has been addedUbiquiti
SKU: UP-SENSE-3
Ubiquiti UP-SENSE-3 UniFi Protect All-In-One Environmental Sensor
Occupancy + motion + environment in one sensor for UniFi Protect
- Combines occupancy, motion, and environmental sensing in one wall- or corner-mountable unit.
- Edge processing on Dream Machine or Cloud Key keeps alerts local—no cloud dependency required.
- FCC, IC, and CE certified; integrates directly with UniFi Protect for video-correlated event logging.
$173.99The item has been added -
Ubiquiti
SKU: USL-ENTRY-US
Ubiquiti USL-ENTRY-US monitor for door/wind open/close status
Door and window sensor with native UniFi dashboard integration
- Monitors open/closed status on doors, windows, cabinets, and equipment racks.
- Integrates natively with UniFi Controller — no separate console or API middleware needed.
- Internal battery rated up to 6 years reduces maintenance in commercial deployments.
$39.00 $38.99 Save $0.01The item has been added -
Ubiquiti
SKU: USL-ENVIRONMENTAL
Ubiquiti USL-ENVIRONMENTAL Batt-powered SuperLink enviroment
Battery-powered environmental sensor for UniFi Protect monitoring
- CR123A battery delivers up to 6 years of runtime, eliminating wired power runs.
- SuperLink wireless reaches 2 km, covering warehouses and distributed remote sites.
- IPX5-rated polycarbonate enclosure handles splash exposure in non-submerged installs.
$63.50 $50.99 Save $12.51The item has been added -
Add to Cart The item has been addedUbiquiti
SKU: USL-MOTION
Ubiquiti USL-MOTION SuperLink motion sensor
Wireless motion sensor for UniFi Protect with CR123A battery
- CR123A battery delivers up to 6 years runtime, eliminating wired power runs.
- Dual PIR sensors provide 1.5m horizontal and 6m vertical detection with pet immunity.
- SuperLink 915/868 MHz radio reaches 2 km; FCC, IC, CE, and NDAA-compliant.
$50.99The item has been added
Sensors & IoT
Environmental sensors, I/O controllers, and IoT devices for monitoring temperature, humidity, door state, water detection, and other site conditions. IP-connected sensors integrate with VMS and BMS platforms for automated alerting.
Plan Your Deployment
- Define sensor types needed per monitoring zone
- Confirm IP connectivity and PoE availability at sensor locations
- Evaluate SNMP, MQTT, or API integration with your management platform
Sensors & IoT — Engineering-Grade Network Infrastructure for Commercial Deployments
This category covers 111 working models of sensors & iot sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Port count and PoE budget come first. An 8-camera install needs at least 9 ports (cameras + uplink), with PoE budget covering the sum of per-camera PoE class. Account for uplink speed: 1 Gbps uplinks bottleneck under heavy video load on switches with 8+ high-resolution cameras. SFP+ or 10 Gbps uplinks remove that bottleneck on growing sites.
Managed versus unmanaged switches affect troubleshooting and VLAN segmentation. Managed switches (HPE Aruba, Cisco, Netgear ProSAFE M-series) support VLANs, link-aggregation, port mirroring, and SNMP monitoring — essential for any deployment over 16 cameras or with mixed traffic. Unmanaged switches work for small isolated camera networks but limit growth and troubleshooting visibility.
Layer 3 capability (routing, VLAN inter-VLAN routing) becomes important when surveillance, access control, and corporate traffic share the same physical network. Surveillance VLAN isolation is now standard practice — segregate camera traffic from corporate Wi-Fi and guest networks to prevent broadcast storms and lateral attack paths. Confirm the switch supports the VLAN count and ACL complexity you need.
Outdoor/industrial deployments need ruggedized switches. ComNet, Antaira, and Moxa make hardened switches rated for -40°C to +75°C, vibration, and waterproof housings. DIN-rail mounting fits standard outdoor enclosures. Standard data-closet switches in outdoor enclosures fail within 1-2 years from condensation and temperature swings; spec the right environment rating up front.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, Thermal |
| IP Rating | IP66, IPX5, IP56, IP65 |
| Connectivity | Wired |
| Power | AC/DC, Battery, ON, PoE, 9VDC via alkaline battery @ 40µA (resting) |
| Type | Security Device, Accessory, Motion Sensor, Beam Sensor, Laser Sensor, Vehicle Sensor, Access Point, Switch |
| Durability | Indoor |
Top Brands in This Category
Frequently Asked Questions
What's the difference between managed and unmanaged PoE switches?
Unmanaged switches power-on and forward traffic without configuration — simplest deployment but no VLAN, no monitoring, no troubleshooting visibility. Managed switches add VLANs, link-aggregation, port mirroring, SNMP, and remote-management interfaces. For deployments above 16 cameras or those sharing infrastructure with other systems, managed is the right choice; the per-port cost is modest and the operational benefit is large.
How much PoE budget should I size for?
Sum the PoE-class budget of all PoE-powered devices, then add 20-30% headroom for growth. Eight 802.3at cameras at 30W max each is 240W minimum — but a 130W-budget 8-port PoE+ switch can't deliver that. Confirm both per-port budget and total PoE budget; many entry-level switches advertise PoE+ ports but cap aggregate budget at half the per-port maximum.
Do I need 10 Gbps uplinks?
For installations under 32 cameras with mid-resolution streams, 1 Gbps uplinks suffice. Above that, or when you need fast investigative playback for many simultaneous reviewers, 10 Gbps (SFP+) uplinks remove the choke point. NVRs writing to NAS over the network also benefit. SFP+ has become reasonably affordable on managed switches; opt for it on new installs over 16 cameras.
Can I run VoIP and video on the same switch?
Yes — modern managed switches use VLAN segregation to keep VoIP, video, and data traffic separated even on shared physical ports. Use QoS (Quality of Service) to prioritize VoIP for low latency and assign video its own queue. Avoid mixing untagged traffic types on a single switch port without VLAN configuration; broadcast storms and bandwidth competition cause both voice and video quality issues.
What's the right uplink between buildings on a campus?
Single-mode fiber for runs over 100 m, multi-mode for shorter runs (typically up to 550 m on OM3, 300 m on OM4 at 10 Gbps). Bidirectional SFPs (single fiber instead of pair) save fiber count when the run is already deployed. Avoid copper between buildings — ground-potential differences during lightning strikes destroy switch SFP modules even when surge-protected.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.