APC by Schneider Electric AP7902BGRNX874 Switched 2U Rack PDU 30A 120V
The APC by Schneider Electric AP7902BGRNX874 is a 2U switched rack power distribution unit rated at 30A/120V with sixteen 5-20 outlets — a practical choice for high-density rack power distribution in network closets, server rooms, and security equipment enclosures where remote outlet-level control matters. The "Full Paint Aetna" designation indicates a custom color finish, typical of APC's configure-to-order program for deployments with specific rack aesthetic or identification requirements.
Key Features
- 16 × NEMA 5-20 Outlets: Sixteen individually switched 5-20 receptacles on a single 2U unit means you can cycle power to individual devices — NVRs, encoders, switches, IP phone systems — without touching the rack. That's the difference between a service call and a remote reboot at 2 a.m.
- 30A / 120V Input: A 30A feed gives you meaningful headroom over the typical 20A circuit. Running sixteen devices at moderate draw without tripping the upstream breaker is the practical benefit — plan for a dedicated 30A/120V circuit at the rack.
- 2U Rackmount Form Factor: The 4.5-inch height fits any standard 19-inch rack. Horizontal mounting brackets are included, so no separate hardware order is needed to get it on the rails.
- Switched Architecture: Per-outlet switching — the defining spec of this PDU class — lets network and security operations teams manage device power states remotely via the network interface. Useful for scheduled reboots, load sequencing on startup, and isolating a misbehaving device without disrupting the rest of the rack.
- 10-Foot Power Cord: The 10-foot input cord provides enough reach to hit a floor-mounted PDP or overhead busway without a cord-extension adapter cluttering the cabinet.
- Cord Retention Bracket(s) Included: Accidental unplugging of a device cord in a dense rack is a real-world failure mode. The included cord retention brackets lock device plugs in place — relevant in environments with frequent rack access or vibration (e.g., industrial security enclosures).
- Custom Color / Full Paint Finish: The Aetna custom paint variant is part of APC's configure-to-order program. If you're sourcing this SKU, confirm the color meets your deployment's physical identification scheme before ordering — this is not a standard black finish and may affect lead time.
Integration & Compatibility
The AP7902BGRNX874 fits the APC by Schneider Electric switched PDU ecosystem. Switched APC rack PDUs in the AP79xx family typically integrate with APC's network management card (NMC) infrastructure and are manageable via SNMP, HTTP/HTTPS, and Telnet/SSH depending on installed card. Confirm the specific NMC variant supported by this SKU before integrating into an existing EcoStruxure or dcTrack environment. For NVR-heavy security racks or high-port-count PoE switch deployments, the switched PDU pairs naturally with a UPS on the input side — size the UPS for the full 30A input load. Consult your rack power planning documentation to verify circuit capacity before commissioning.
What's in the Box
- 1× AP7902BGRNX874 Switched Rack PDU (2U, 30A, 120V, 16-outlet)
- Cord Retention Bracket(s)
- Horizontal Mounting Brackets
- Installation Guide
- User Manual
Frequently Asked Questions
Q: What input plug type does the AP7902BGRNX874 use?
A: Based on the 30A/120V rating, the AP7902BGRNX874 uses a NEMA L5-30P twist-lock input plug — standard for 30A single-phase 120V circuits. Verify with the manufacturer datasheet for your specific unit before ordering a dedicated circuit.
Q: How many outlets does the AP7902BGRNX874 have?
A: The AP7902BGRNX874 provides 16 NEMA 5-20 outlets, each individually switched for remote power control.
Q: Is the AP7902BGRNX874 a standard black finish?
A: No. The "Full Paint Aetna" designation indicates a custom color finish applied through APC's configure-to-order program. This is not a standard catalog color. Confirm finish requirements and lead time before ordering.
Q: Does the AP7902BGRNX874 require a special power circuit?
A: Yes. The 30A/120V input requires a dedicated 30A circuit — a standard 20A wall outlet will not support this unit. Plan for a NEMA L5-30R receptacle or equivalent hardwired connection at the rack location.
Q: What rack space does the AP7902BGRNX874 occupy?
A: The AP7902BGRNX874 occupies 2U (approximately 3.5 inches) in a standard 19-inch rack and ships with horizontal mounting brackets for straightforward rail installation.
The AP7902BGRNX874 hits the right spec tier for high-density 2U security or IT racks: 30A input gives you real headroom over a 20A circuit, and sixteen individually switched 5-20 outlets mean you're not yanking power cords when a device needs a cycle. The custom "Full Paint Aetna" finish is the one thing to call out upfront — this is a configure-to-order variant, not a standard stocking SKU, so factor lead time into your deployment schedule.
Technical Highlights:
- 30A / 120V Input: Supports a full rack of moderate-draw devices without tripping the upstream breaker — plan the dedicated NEMA L5-30P circuit before the rack goes in, not after.
- 16 × NEMA 5-20 Switched Outlets: Per-outlet switching enables remote reboot, load sequencing, and device isolation — operationally meaningful in 24/7 security operations environments where physical rack access is inconvenient or disruptive.
- Cord Retention Brackets Included: In vibration-prone or high-traffic enclosures, accidental cord pull is a real failure mode. The included retention hardware addresses this without a separate accessory order.
Deployment Considerations:
- Verify NMC (Network Management Card) slot availability and the specific card variant supported by this SKU before assuming remote management capability — switched PDUs require a compatible NMC installed to enable network-based outlet control.
- The custom Aetna paint finish means this is not a standard catalog item — lead times may be longer than APC's standard PDU line; order early if rack commissioning has a hard deadline.
Best fit for security operations center (SOC) racks, NVR/encoder enclosures, or enterprise network closets where per-outlet remote switching is operationally required and a 30A dedicated circuit is already provisioned or planned.
