QNAP 2GB DDR3L Ram 1600 MHZ So-Dimm For - RAM-2GDR3L-SO-1600

QNAP RAM-2GDR3L-SO-1600 2GB DDR3L SO-DIMM Memory Module

Overview

The RAM-2GDR3L-SO-1600 is a factory-genuine 2GB DDR3L SO-DIMM running at 1600 MHz, designed to expand the memory headroom on compatible QNAP NAS appliances. Lower-voltage DDR3L operation reduces heat output compared to standard DDR3 — relevant when the module is seated inside a compact, low-airflow NAS enclosure running continuously. Installing this module in a supported unit allows the NAS OS to handle larger concurrent workloads: more simultaneous iSCSI connections, heavier virtual machine loads, or expanded metadata caching without hitting memory pressure limits that throttle throughput.

Compatibility

This module is confirmed for use in QNAP NAS units that ship with or support DDR3L SO-DIMM slots running at 1600 MHz. Specific confirmed deployments include the QNAP NAS TS-251A and TS-451A series, which support dual-channel DDR3L-1600 configurations and are upgradable to 8GB total using matched SO-DIMM pairs. If pairing two modules for dual-channel operation — the only configuration that maximizes memory bandwidth on supported platforms — both slots must be populated with identical capacity modules. Check the NAS storage model's official memory compatibility list before ordering; QNAP NAS units are slot- and speed-specific, and installing an unsupported module may result in non-POST or single-channel fallback. For platforms supporting the broader QNAP memory upgrade line, the RAM-2GDR3L-SO-1600 sits at the 2GB tier — suitable for light-duty surveillance NAS or budget-constrained refreshes. Units requiring higher capacity should consider the 4GB or 8GB DDR3L SO-DIMM variants in the same QNAP memory family.

Installation Notes

Power down the NAS completely and discharge static before handling. SO-DIMM modules seat at an angle and click flat — do not force. Verify the module is recognized in the QNAP QTS storage manager after first boot before closing the enclosure. If the system does not POST or shows reduced capacity, reseat the module and confirm slot and voltage compatibility with the target NAS model.