ACTi CTS-RL400-4K20 10MP PTZ Camera

ACTi CTS-RL400-4K20 10MP PTZ Camera

Overview

The CTS-RL400-4K20 is a 10MP wall-mounted PTZ camera designed for facility monitoring, perimeter surveillance, and dynamic scene tracking where a single motorized camera must cover large areas without deploying multiple fixed units. The 10MP sensor delivers sufficient detail for identification across wide scenes, then zoom into regions of interest via motorized pan-tilt-zoom control. Wall-mount form factor makes it suitable for visible deterrence applications — mounting hardware and positioning are straightforward on standard facility surfaces. Powered by PoE (802.3af), the CTS-RL400-4K20 eliminates dedicated power runs to the camera location, simplifying installation in retrofit or new-build environments.

Compatibility

The CTS-RL400-4K20 integrates with IP surveillance systems and VMS platforms that support ONVIF and standard IP camera protocols — this covers most commercial video management software. Remote pan-tilt-zoom control is delivered through the network connection, allowing centralized command alongside other networked cameras in your system. No proprietary software is required; standard RTSP streaming and network-based integration apply.

Installation Notes

Wall mounting requires a solid structural surface capable of supporting the camera weight and the mechanical load from pan-tilt operation. PoE 802.3af power delivery (13W typical draw) is within the standard injector or PoE switch budget, but confirm your switch has sufficient per-port power allocation if you are aggregating multiple cameras on the same device. Network cabling should follow standard installation practices — runs longer than 100 meters may require active PoE equipment or midspan injectors to maintain voltage at the camera end.