PoE Injectors & Midspans
Showing Results for PoE Injectors & Midspans
-
Add to Cart The item has been addedAxis
SKU: 02208-001
Axis 02208-001 30W Midspan PoE+ Injector
30W PoE+ midspan injector for PTZ cameras and high-power devices
- 30W @ 56V DC output supports motorized lenses and access points beyond standard PoE limits
- Dual input (AC 24V or DC 10–28V) adapts to existing power infrastructure on-site
- Auto-detects device power needs and maintains Gigabit Ethernet on all four pairs
In stock · Ships same business day$119.00 $114.99 Save $4.01The item has been added -
Axis
SKU: 02209-021
Axis 02209-021 10PK 90W PoE++ Midspan AC/DC
- 10-pack of 90W PoE++ (802.3bt) AC/DC midspans for PTZ and heated cameras
- Per-port output sufficient for dual-heater thermal and explosion-proof models
- Backwards compatible with 802.3af and 802.3at powered devices
$4,199.00 $4,072.99 Save $126.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 02445-001
Axis 02445-001 PoE+ Injector
Single-port PoE+ injector extends 802.3at power 100m without latency
- PoE+ (802.3at) injector supplying up to 30W per port
- Powers mid-range cameras, APs, and edge appliances
- 1.1 lb compact unit for distributed device powering
$85.00 $81.99 Save $3.01The item has been added -
Axis
SKU: 02520-001
Axis 02520-001 External Power Source 12V/2A
12V/2A external PSU for 2N intercom systems
- 12V DC, 2A external power source for 2N intercoms
- Regulated voltage prevents brownout-induced dropout
- Direct-fit PSU for 2N answering and intercom units
$49.00 $47.99 Save $1.01The item has been added -
Axis
SKU: 03398-001
Axis 03398-001 TU8007-R 90W Industrial Midspan
- Industrial 90W PoE++ midspan with DIN-rail electrical panel mount
- Powers multi-imager cameras, high-performance PTZs, and edge servers
- Single-port design simplifies troubleshooting and one-shot replacement
$299.00 $289.99 Save $9.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 02627-004
Axis M1075-L Wireless Kit with PoE Injector - 02627-004
Wireless + PoE kit for Axis M1075-L cameras, no extra power runs
- 802.11 wireless module eliminates hardwired Ethernet cable runs to camera
- PoE injector delivers power and data over single cable, ~15W budget
- Complete kit includes wireless module, injector, Ethernet cable, installation guide
In stock · Ships same business day$73.00 $72.99 Save $0.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 5503-931
Axis Midspan DIN Clip Mount - 5503-931
35mm DIN rail clip secures Axis T8123/T8124/T8125 midspan injectors
- Mounts to standard 35mm DIN rails already in telecom cabinets
- Holds injector firmly to prevent disconnection from vibration or cable stress
- Compact vertical mounting uses minimal rail space for dense rack layouts
In stock · Ships same business day$20.00 $19.99 Save $0.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 02740-004
Axis T8154 60W PoE++ Midspan Power Supply - 02740-004
60W PoE++ midspan for cameras without built-in power support
- 60W @ 55V DC (IEEE 802.3bt Type 3) handles PTZ and thermal cameras
- Dual RJ45 + SFP slot supports fiber or copper network backhaul
- Auto-detects PoE/High PoE devices; operates –10°C to 45°C at full power
In stock · Ships same business day$219.00 $211.99 Save $7.01The item has been added -
Axis
SKU: 01951-001
Axis TD9301 Outdoor Midspan Pole Mount - 01951-001
Pole mount for outdoor 30W midspan power distribution
- IP65-rated housing withstands outdoor weather and moisture exposure
- Pole mount form factor for flexible elevated installation in surveillance
- Compatible with AXIS 30W Outdoor Midspan for PoE camera networks
$63.00 $60.99 Save $2.01The item has been added -
Axis
SKU: 02867-024
Axis TU6011 Mains Cable 10 pcs - 02867-024
Mains cable for AXIS TU8004 90W Midspan, 10-pack with regional plugs
- 10-pack of replacement mains cables for TU8004 midspan
- Country-specific power cord for regional compliance
- Bulk pack for fleet and chain-store deployment
$189.00 $182.99 Save $6.01The item has been added -
Axis
SKU: 02453-001
Axis TU8002-E 90W Outdoor PoE++ Midspan - 02453-001
90W outdoor PoE++ midspan for high-power cameras in wet environments
- 90W power output runs PTZ cameras with heaters or dual wireless radios
- IP66 weatherproof aluminum enclosure rated for rain, dust, and spray
- Gigabit Ethernet pass-through with surge protection and wall/pole brackets
$389.00 $376.99 Save $12.01The item has been added -
Axis
SKU: 02783-001
Axis TU8004 90W PoE++ Midspan Injector - 02783-001
90W PoE++ midspan injector for high-power network video devices
- Delivers 90W at 57V DC; auto-detects PoE, PoE+, High PoE, PoE++
- Supports 10/100/1000/2500/5000 Mbps; dual power channels at 0.8A each
- Wall, shelf, or DIN rail mount; operates -20°C to 40°C at full power
$219.00 $211.99 Save $7.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 02726-001
Axis TU8010 2-Port PoE Extender - 02726-001
2-port PoE extender pushes network reach 100m further without power loss
- 2-port PoE extender with full-power output per port
- No power reduction on downstream 30W cameras
- 1.21 lb wall-mount unit for camera-pair powering
$259.00 $250.99 Save $8.01The item has been added -
Axis
SKU: 02727-001
Axis TU8011 4-Port PoE Extender - 02727-001
4-port PoE extender stretches camera runs to 100 meters per unit
- 4-port PoE extender (4x 802.3af outputs at 13W each)
- PoE++ Class 8 input accepts 30W+ from upstream switch
- 1.76 lb wall-mount unit for camera cluster powering
$319.00 $308.99 Save $10.01The item has been added -
Code Blue
SKU: SLNP0101
Code Blue 1-Port PoE Injector Indoor Use Only - SLNP0101
- Single-port PoE injector delivers power and data over one Ethernet cable.
- Compatible with Code Blue IP1500, IP2500, IP5000, LS1000, LS2000, and IA4100.
- Mounts to wall, pole, or rack rail — no separate power supply required indoors.
$68.99The item has been added -
Code Blue
SKU: SLNP0134
Code Blue 1-Port PoE Injector Outdoor- Indoor Use Only - SLNP0134
- Delivers power and data over a single Ethernet run, eliminating need for a PoE switch.
- Supports CB1/2/4/5/6/9, CBRT towers, and legacy LS/IP/IA series Code Blue devices.
- Mounts to wall, pole, recessed, or rack positions to fit distributed comm installations.
$259.99The item has been added
PoE Injectors & Midspans
PoE injectors and midspans provide Power over Ethernet to devices such as IP cameras, intercoms, and access control hardware. These solutions are ideal when adding PoE to non-PoE switches or expanding power capacity in existing network deployments.
Plan Your Deployment
- Power requirements (PoE, PoE+, PoE++, total wattage)
- Number of devices and port capacity planning
- Distance limitations and cable quality considerations
- Integration with existing switches and infrastructure
- Redundancy and long-term scalability needs
PoE Injectors & Midspans — Engineering-Grade PoE Power Delivery for Commercial Deployments
This category covers 294 working models of poe injectors & midspans sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Match the PoE class to the device load. 802.3af delivers up to 15.4W at the source (12.95W at the device) and powers most fixed-lens cameras and access readers. 802.3at (PoE+) reaches 30W and supports motorized cameras, illuminators, and heated outdoor housings. 802.3bt (PoE++/4PPoE) goes to 60-90W for large PTZs, multi-imagers, and devices with integrated heaters and wipers.
Single-port injectors vs. midspan multiport units depends on the scale. A handful of cameras at fixed locations are economical with single-port injectors near the device. Sites with 16+ PoE devices benefit from a midspan (Microsemi PowerDsine, Phihong, Lantronix) that consolidates power management. PoE switches absorb the role for larger sites where unmanaged power is acceptable.
Cable length and conductor gauge affect deliverable power. 100 m of Cat5e at full 802.3bt load drops voltage enough that some devices report under-volt errors. For runs near the 100m limit, use Cat6 with all 4 pairs and confirm the injector's voltage-at-source spec. For longer-than-spec runs, PoE extenders (Veracity, Phybridge, ComNet) regenerate the signal mid-run.
Surge protection, grounding, and outdoor-rated housings matter for exterior PoE injectors. Lightning-induced surges destroy PoE-powered devices through the network cable as quickly as direct strikes. Inline ethernet surge protectors (Ditek, Transtector) at both ends of the run protect both the injector and the camera. Use Cat6A shielded for runs exiting the building, with proper grounding at the equipment rack.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | Thermal, 6MP, 20MP+ |
| IP Rating | IP68, IP66 |
| Connectivity | Wired, Single-Mode Fiber, Multi-Mode Fiber, Wi-Fi, Ethernet over Coax, WiFi + Wired |
| Power | PoE+, PoE, PoE++, AC/DC, 24VAC, 12VDC |
| Channels | 8 |
| Type | Power Supply, Switch, PoE Adapter, PoE Injector, PoE Switch, Network Hub, PoE Device, Media Converter |
Top Brands in This Category
Frequently Asked Questions
What's the difference between 802.3af, 802.3at, and 802.3bt?
802.3af (PoE) provides up to 15.4W at the source — standard for fixed cameras and access readers. 802.3at (PoE+) reaches 30W — for motorized cameras, illuminators, and small PTZs. 802.3bt (PoE++/4PPoE) reaches 60-90W (Type 3 and Type 4) — for multi-imager cameras, large outdoor PTZs, and devices with integrated heaters. Match the injector class to the device's PoE rating; over-spec'd injectors don't harm devices but cost more.
Can I run PoE on Cat5e or do I need Cat6?
Cat5e supports 802.3af and 802.3at to the full 100 m run length without issue. For 802.3bt at 60W+ over long runs, Cat6 with shielded conductors is more reliable — Cat5e can deliver but voltage drop approaches the limits of the spec. For new installs, Cat6 is the safe baseline; for retrofits over existing Cat5e, validate end-to-end voltage at the device after installation.
How far can PoE run?
The IEEE standard caps PoE at 100 m on copper. PoE extenders (Veracity Outreach, Phybridge UniPoE, ComNet PoE extenders) regenerate the signal at intermediate points and stretch the effective run to 300-1000 m depending on the product. For runs beyond 100 m on a single segment, fiber-to-the-camera with media converters is often cheaper than chained extenders.
Do I need a PoE injector if I already have a PoE switch?
If your PoE switch has sufficient per-port budget and total PoE budget for all connected devices, no — the switch handles power delivery. Injectors are needed when (a) the existing switch is non-PoE and replacing it isn't viable, (b) a single device needs higher PoE class than the switch supports, or (c) the device is placed far from the switch and a local injector with shorter run is preferable.
Will a PoE+ device work on a PoE switch port?
Only if the switch port delivers 802.3at (PoE+) or higher. A pure 802.3af port (15.4W max) cannot reliably power an 802.3at device that needs up to 30W — the device will fail to negotiate or will reset under load. Confirm the switch's per-port PoE class capability in its datasheet, not just the aggregate PoE budget. Many older switches are af-only despite total-budget numbers that suggest otherwise.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.