Panduit F92EPLBLBSBM001 OS1/OS2 LC Duplex Plenum Fiber Optic Patch Cord 1M
Overview
The Panduit F92EPLBLBSBM001 is a 2-fiber, OS1/OS2 single-mode patch cord from Panduit's Opti-Core™ family, terminated with LC duplex connectors on both ends and rated for plenum (OFNP) installations. At 1 meter (3.28 ft), it is sized for short inter-rack or panel-to-switch connections where precise cable management matters and slack loops are not an option. If you are specifying fiber optic patch cords for high-density MDA or HDA runs, this cord is built for exactly that environment. The red jacket color-codes OS2 single-mode runs at a glance — useful in dense patch fields where LC connections from multiple fiber types share the same panel.
Key Features
- OS1/OS2 Single-Mode Fiber: Single-mode glass supports long-haul runs beyond 10 km at 10G and higher data rates. Even at 1M patch length, OS2 compatibility future-proofs connections to single-mode backbone infrastructure — you won't need to re-cord if the active equipment changes.
- LC Duplex on Both Ends: LC connectors are the de facto standard on SFP/SFP+ transceivers and high-density fiber panels. Duplex LC at both ends means this cord drops straight into switches, media converters, or patch panels without adapter sleeves — no extra insertion loss points.
- Plenum (OFNP) Jacket Rating: OFNP certification allows routing through air-handling spaces above drop ceilings and below raised floors without conduit. For commercial buildings and data centers with open plenum returns, this eliminates the cost and labor of conduit runs and satisfies NEC Article 770 requirements directly.
- Red Jacket — Color-Coded OS2: The red outer jacket follows the TIA-598 color convention for OS2 single-mode fiber. In a mixed-fiber patch field (OM3 aqua, OM4 violet, OS2 red), color coding reduces mis-patching errors during moves, adds, and changes — a practical benefit in large IDF/MDF environments.
- 1M (3.28 ft) Length: A 1-meter cord is intentionally short — right-sized for face-plate-to-switch, panel-to-device, or co-located equipment connections. It eliminates the cable management overhead of excess loop coiling that comes with longer cords when the equipment is side-by-side in the same rack or adjacent panels.
- RoHS Compliant: Meets EU RoHS Directive requirements on hazardous substance restrictions. Required for projects with European compliance mandates or government procurement specifications that reference RoHS, and avoids disposal/handling classification issues for restricted materials.
- Opti-Core™ Product Family: Part of Panduit's structured cabling line, which integrates with Panduit fiber optic panels, cassettes, and enclosures. Using matched-family components simplifies channel certification and end-to-end system documentation.
Integration and Compatibility
The F92EPLBLBSBM001 is compatible with any LC duplex SFP or SFP+ port operating over OS1 or OS2 single-mode fiber. Typical deployment points include 1G/10G/25G switch uplinks, fiber distribution panels, media converters, and structured cabling interconnect frames. It integrates cleanly into network switch installations where short patch runs from the fiber distribution frame to active equipment are required. Sold individually (package quantity: 1); carton quantity is 10 for volume installations. For longer horizontal or backbone runs, fiber optic cable assemblies in the same Opti-Core™ family are available in extended lengths.
What's in the Box
- 1x Panduit Opti-Core™ F92EPLBLBSBM001 OS1/OS2 LC Duplex to LC Duplex Plenum Fiber Patch Cord, 1M, Red
Frequently Asked Questions
Q: What fiber type does the F92EPLBLBSBM001 use — single-mode or multimode?
A: Single-mode. The F92EPLBLBSBM001 is rated OS1/OS2, which is single-mode fiber. Do not use it with OM1–OM4 multimode transceivers or panels — the fiber core diameter and wavelength compatibility differ.
Q: Can this patch cord be installed in a plenum ceiling space without conduit?
A: Yes. The OFNP (plenum) flammability rating allows installation in air-handling plenum spaces per NEC Article 770 without conduit. This is the correct rating for above-ceiling and raised-floor data center environments.
Q: What does the red jacket color indicate?
A: Red is the TIA-598 color convention for OS2 single-mode fiber. It is a visual identification aid — it does not affect optical performance but reduces mis-patching in mixed-fiber environments.
Q: Is the F92EPLBLBSBM001 RoHS compliant?
A: Yes. It meets RoHS requirements as stated in the product specifications.
Q: What connector type is on each end?
A: LC duplex on both ends. This mates directly with SFP/SFP+ transceiver cages and high-density LC patch panels — no adapter required.
The detail I always flag when specifying the F92EPLBLBSBM001 is the OFNP plenum rating paired with the 1-meter length — that combination is not as common as it sounds. Most integrators stock plenum fiber in longer pull lengths; short pre-terminated plenum cords for panel-to-device connections are a distinct item, and skipping to a riser-rated (OFNR) cord to save a few dollars in a plenum ceiling is a code violation that gets caught at inspection.
Technical Highlights:
- OS1/OS2 Single-Mode Glass: Supports 10G and beyond at distances well past 1 meter — this cord will not be your bandwidth bottleneck as active equipment is upgraded over the infrastructure's lifetime.
- OFNP Plenum Jacket: Meets NEC 770 for open-air plenum spaces. Eliminates conduit on short intra-plenum runs — a real labor cost reduction in high-density structured cabling buildouts.
- LC Duplex Terminations: Direct-fit for SFP/SFP+ ports. No adapter sleeve means one fewer insertion point and one fewer potential reflectance contributor in the channel.
Deployment Considerations:
- At exactly 1M, verify slack management before ordering — if your panel-to-switch face distance is over 1 meter after routing, size up rather than stress the connector ferrules.
- The red jacket is OS2 per TIA-598, but verify the transceiver wavelength (typically 1310nm or 1550nm for OS2) matches the active equipment spec before commissioning — jacket color does not substitute for optical compatibility confirmation.
This cord is the right specification for MDA-to-HDA short connections in a structured single-mode fiber buildout — particularly in commercial buildings where plenum compliance is non-negotiable and LC-SFP+ is the dominant active equipment interface.
