Panduit F92ELANB1SNM009 Opti-Core OS2 Fiber Patch Cord
The Panduit F92ELANB1SNM009 delivers single-mode OS2 connectivity for datacenter backbone and long-haul fiber deployments. This 9-meter duplex patch cord features SC/APC to LC/APC connectors with angle-polished terminations that minimize back-reflection—essential for 10G, 40G, and 100G Ethernet links where signal integrity directly impacts error rates. The 1.6mm cable diameter supports high-density patching in structured cabling environments, while the LSZH jacket meets fire-safety codes for enclosed spaces. Built under Panduit's Opti-Core specification, this cord is engineered for commercial IT infrastructure and enterprise surveillance networks that demand consistent insertion loss across every link.
Key Features
- OS2 single-mode fiber rated for 10km+ transmission at 10 Gigabit speeds
- SC/APC and LC/APC green connectors with 8° angle polish for <-60dB return loss
- 1.6mm jacket diameter enables 40% higher port density versus 2mm cordage
- LSZH (Low Smoke Zero Halogen) compound complies with IEC 60332-1 and 60754-2
- Standard insertion loss specification (≤0.5dB typical) verified during manufacturing
- Duplex (2-fiber) configuration supports bidirectional 1G/10G/40G links
- Yellow jacket for OS2 cable identification per TIA-598-C color code
- Opti-Core™ build quality with protective dust caps and strain relief boots
OS2 fiber supports single-mode wavelengths (1310nm and 1550nm) with chromatic dispersion under 18ps/nm·km, enabling 10GBASE-LR runs beyond 10 kilometers without inline amplification. The APC (Angled Physical Contact) terminations reduce Fresnel reflection by directing back-scattered light into the cladding rather than the fiber core—a critical advantage in DWDM systems, high-speed storage networks, and analog video transport where reflected signals cause crosstalk and jitter. Each connector ferrule is factory-polished to an 8° angle and inspected for end-face geometry; insertion loss ships below 0.5dB and return loss exceeds -60dB, outperforming flat PC connectors by 15dB. The 1.6mm cable diameter uses a tight-buffered construction around the 9/125µm glass core, offering mechanical protection without the bulk of 2mm or 3mm jacketing—installers gain 40% more usable space in horizontal cable managers and rear-access fiber panels.
Deploy this patch cord in equipment-distribution-area (EDA) racks connecting switches to SAN controllers, or in horizontal cross-connects linking IP cameras to fiber aggregation switches. The SC connector (subscriber connector, square form factor) is prevalent on legacy switches, media converters, and structured cabling panels; LC (Lucent connector, half the footprint) dominates SFP+ and QSFP+ transceiver ports on modern datacenter gear. The 9-meter length suits same-row cabinet-to-cabinet runs or cross-aisle links in modular datacenter pods. LSZH jacketing is mandated in European installations per CPR (Construction Products Regulation) Euroclass and is best practice in North American plenum spaces where PVC combustion byproducts (chlorine, dioxin) pose evacuation hazards. The yellow outer jacket follows TIA-598-C OS2 identification standards, preventing field mismatches with OM3/OM4 multimode cordage.
This cord ships in cartons of 10 with factory-installed dust caps and individual serialized labeling. Panduit Opti-Core patch cords are manufactured under ISO 9001 quality systems and comply with RoHS and REACH material directives. The product carries Panduit's standard warranty covering materials and workmanship; insertion-loss values are traceable to factory test reports for customers requiring FAT documentation on federal or healthcare projects. For installations requiring armored cable, plenum-rated riser jumpers, or pre-terminated trunk assemblies, consult Panduit's fiber configurator—this SKU addresses the 85% use case of indoor OS2 patching where flexibility, density, and safety certifications converge.
