Panduit F92RPU2U2ONM009 Opti-Core 9m LC-APC Single-Mode Fiber Patch Cord
The Panduit F92RPU2U2ONM009 is a 9-meter OS2 single-mode fiber optic patch cord engineered for high-density datacenter and enterprise network deployments where space, performance, and code compliance intersect. Built on Panduit's Opti-Core platform, this cord features LC Duplex Uniboot APC connectors at both ends, a pull-boot design for field-reversible polarity, and plenum-rated (OFNP) jacketing. The uniboot form factor reduces pathway congestion by 50% compared to traditional dual-jacket duplex cords, while the angled physical contact (APC) connector geometry delivers return loss performance below -60 dB—critical for 10G/40G/100G optics and low-latency storage fabrics.
Key Features
- LC Duplex Uniboot APC connectors (both ends) — angled endface reduces back-reflection for high-speed optics
- OS2 single-mode fiber, 9 micron core — optimized insertion loss for 10G+ Ethernet, Fibre Channel, and long-reach applications
- 9-meter (29.52 ft) pre-terminated length — factory-tested for reliable plug-and-play deployment
- Plenum-rated OFNP jacket — code-compliant for installation in air-handling spaces and horizontal cable trays
- Pull-boot polarity conversion — swap transmit/receive in the field without re-termination or adapters
- Yellow jacket — standard color-coding for single-mode OS2 fiber per TIA-598-D
- RoHS compliant, meets TIA-568-C.3, ISO/IEC 11801, FOCIS-3, FOCIS-10
The uniboot connector consolidates two fibers into a single, narrow-profile boot, cutting cable bundle diameter and bend-radius demand in half. In 42U racks with rear-mounted 10G switches or SAN directors, this translates to cleaner horizontal managers, less airflow obstruction, and faster MAC work. The APC polish—ground at an 8-degree angle—physically directs reflected light into the cladding rather than back toward the transmitter, keeping return loss below -60 dB even under dirty-connector or high-insertion-cycle conditions. This matters for coherent optics, DWDM transport, and low-latency financial/HFT fabrics where reflectance above -55 dB can trigger link flapping or forward error correction overhead.
Panduit factory-terminates and tests every Opti-Core cord to TIA-568-C.3 insertion-loss limits (≤0.75 dB max for OS2), then serializes and bags each unit with a test report. The pull-boot mechanism allows installers to reverse polarity on-site by pulling the tab, rotating the connector 180°, and re-seating—essential when swapping from Method A to Method B trunk polarity or correcting field mismatches without stocking both A-to-B and A-to-A SKUs. The plenum jacket meets NEC Article 770 and NFPA 262 flammability requirements, making it legal for installation above drop ceilings, in plenums, and in vertical risers without conduit. The 9-meter length fits typical cross-connects in mid-size datacenters, entrance facilities, or equipment distribution areas where pre-cut lengths reduce scrap and labor versus field-termination.
Compliant with TIA-568-C.3, ISO/IEC 11801 Ed. 2.2, TIA-604-3 (FOCIS-3), TIA-604-10 (FOCIS-10), and EU RoHS Directive 2002/95/EC. Supplied in single-unit packaging, carton quantity 10. Panduit's precision ceramic ferrule manufacturing and automated endface inspection ensure <0.5 dB typical insertion loss and geometry that passes interferometer certification—delivering the consistency and traceability commercial integrators require for structured cabling warranty compliance and multi-vendor optical infrastructure.
