Panduit F92RLU2U2ONM009 Opti-Core OS2 Single-Mode LC Uniboot Fiber Patch Cord, 9m
The Panduit F92RLU2U2ONM009 is a 9-meter duplex single-mode fiber patch cord engineered for high-density data center and campus backbone deployments. Part of Panduit's Opti-Core™ line, this OS2-rated jumper features LC Duplex APC Uniboot connectors on both ends, a 2.0mm LSZH microcable jacket, and factory-optimized insertion loss performance. Yellow jacket color follows TIA-598-C single-mode identification standards. Designed for 10G/40G/100G optical links in telecom rooms, equipment distribution areas, and horizontal fiber-to-the-desk installations where reduced cable congestion and fire-safety compliance are critical.
Key Features
- OS2 single-mode fiber (9/125µm) rated for distances up to 10km at 10G, 40km+ at lower speeds
- LC Duplex APC (angled physical contact) connectors with pull-boot Uniboot housing on both ends
- 2.0mm LSZH (low smoke zero halogen) cable jacket meets IEC 60332-3-24 fire performance
- Optimized insertion loss tested at factory — typical <0.25dB per mated pair
- Uniboot design reduces patch panel footprint by 50% vs. traditional duplex cords
- 9-meter (29.5 ft) length spans long cross-connects in MDA/HDA/EDA zones
- Yellow jacket color per TIA-598-C for instant single-mode visual identification
- RoHS compliant, meets ISO/IEC 11801, TIA-568-C.3, TIA-604-3 (FOCIS-3), TIA-604-10 (FOCIS-10)
APC (angled physical contact) polishing cuts the endface at 8° to direct back-reflected light into the cladding rather than back down the core — critical for DWDM, CWDM, and PON architectures where return loss below -60dB is required. The Uniboot connector housing bundles both transmit and receive fibers into a single compact boot, cutting pathway congestion in half and enabling cleaner pull-through in high-fill conduit or vertical cable managers. Pull-tab on the boot allows one-handed latch release even when surrounded by adjacent cords. Factory-optimized insertion loss means every cord ships with IL ≤0.25dB typical, pre-tested and serialized — eliminating the field variance you see with bulk-terminated assemblies. The 2.0mm microcable jacket is 40% smaller in diameter than legacy 3mm cordage, freeing up tray fill and allowing tighter bend radii (10mm minimum dynamic) in congested pathways.
LSZH jacket construction is mandatory in Europe under CPR Euroclass and increasingly specified in U.S. data centers to reduce toxic smoke and corrosive halogen release during fire events — critical when cable pathways share air-handling plenums or occupy below-raised-floor voids that feed HVAC returns. The 9-meter length bridges typical MDA-to-HDA distances in stacked floor layouts or spans consolidation-point-to-equipment runs in horizontal fiber-to-the-desk (FTTD) designs where 3m and 5m cords fall short. Yellow jacket follows TIA-598-C color convention for OS2 single-mode, preventing accidental cross-patching with OM3/OM4 multimode circuits (aqua/erika violet). Uniboot's 50% footprint reduction doubles usable port density on LC patch panels — particularly valuable in 1U 96-port or 144-port cassette-based systems where every millimeter of horizontal space dictates how many circuits fit before you're forced to add another rack unit.
Compliance with ISO/IEC 11801 Ed.2.2 and TIA-568-C.3 ensures this cord meets global structured cabling permanence and performance benchmarks for Fibre Channel, 10GBASE-LR/ER, 40GBASE-LR4, and 100GBASE-LR4/ER4 applications. TIA-604-3 (FOCIS-3) and TIA-604-10 (FOCIS-10) endface geometry specs guarantee mated-pair concentricity and angular alignment within limits that prevent excessive loss or reflectance. For integrators managing cable congestion in brownfield data center upgrades or designing LSZH-compliant builds under NFPA 70 / NEC Article 770, this Opti-Core jumper delivers the footprint savings, fire safety, and tested performance necessary to meet both code and operational uptime requirements.
