Panduit F91EL3NB1SNM009 9m OS2 SC-LC/APC Patch Cord

Panduit F91EL3NB1SNM009 Opti-Core OS2 Single-Mode Fiber Patch Cord

The Panduit F91EL3NB1SNM009 is a 9-meter OS2 single-mode fiber optic patch cord engineered for long-distance data transmission in enterprise networks, data centers, and campus backbone installations. Featuring SC to LC/APC simplex connectors with 1.6mm LSZH jacketing, this cable delivers the low insertion loss and minimal back reflection required for 10G/40G/100G network infrastructure. The yellow LSZH jacket provides both immediate visual identification of single-mode fiber and compliance with fire-safety codes in enclosed pathways, eliminating the toxic-smoke risk of PVC alternatives during combustion.

Key Features

• OS2 single-mode fiber supports transmission distances up to 10 km at 10 Gb/s and beyond, suitable for inter-building links and long campus runs
• LC/APC (Angled Physical Contact) termination on one end reduces return loss to -60 dB typical, critical for DWDM, CATV, and RF-over-fiber applications
• SC simplex connector on opposite end provides compatibility with legacy single-mode equipment and patch panels
• 1.6mm LSZH (Low Smoke Zero Halogen) jacket meets EN 60332-1-2 flammability standard, required in European installations and recommended for plenum-equivalent U.S. pathways
• Yellow jacket color follows TIA-598-C fiber identification standards, preventing accidental cross-connection with 50/125 or 62.5/125 multimode cables
• 9-meter (29.5 ft) length bridges typical rack-to-rack or distribution-frame-to-equipment distances in telecom rooms and data centers
• Factory-terminated and tested to standard insertion loss specification, eliminating field splicing labor and performance variance
• Single fiber (simplex) construction for unidirectional links or installations using separate TX/RX strands

OS2 fiber, defined in ITU-T G.652, is the global standard for single-mode applications requiring maximum reach and bandwidth. Unlike OM3/OM4 multimode fiber, which limits 10GBASE-SR to 300-400 meters, OS2 supports 10GBASE-LR to 10 kilometers and 100GBASE-LR4 to 10 km over a 9-micron core. The LC/APC connector uses an 8-degree endface angle to direct reflected light into the cladding rather than back toward the source, achieving return loss below -60 dB—ten times better than UPC (Ultra Physical Contact) connectors. This matters in DWDM systems, analog CATV transport, and any application where reflected energy causes bit errors or analog noise. The SC connector on the opposite end uses a push-pull latching mechanism common in telecom central offices and legacy Cisco/Juniper switch installations, providing tool-free insertion and extraction in high-density patch fields.

LSZH jacketing replaces PVC with a halogen-free polymer compound that emits 25% of the smoke and zero hydrochloric acid during combustion, meeting European CPR (Construction Products Regulation) and EN 60332-1-2 vertical flame propagation limits. In the U.S., LSZH is not a direct NEC plenum substitute, but many data center operators specify it in raised-floor and overhead-tray environments to protect personnel during fire evacuation and reduce equipment corrosion from acidic smoke byproducts. The 1.6mm simplex jacket diameter fits standard LC simplex adapters and cable management channels designed for tight-bend indoor routing. The 9-meter length suits cross-connect applications in telecom distribution frames, storage-area-network (SAN) switch uplinks, and building-entry patch panels where multimode reach is insufficient but 10-meter pre-terminated cords leave excess slack. Pre-terminated construction saves 15-30 minutes per endpoint versus field fusion splicing and delivers guaranteed IL performance from Panduit's factory test process, reducing truck rolls for link troubleshooting.

Panduit Opti-Core patch cords ship with individual test reports and meet TIA-568 and IEC 61754 mechanical and optical standards, ensuring compatibility with Cisco, Arista, Juniper, and Dell enterprise switches. The yellow jacket prevents the mode-mismatch errors that occur when orange OM1/OM2 multimode cables are accidentally used in place of OS2 single-mode links, a fault that causes immediate link failure on LR/LX optics. For integrators deploying IP surveillance networks with fiber backbone runs exceeding 300 meters, OS2 patch cords like the F91EL3NB1SNM009 provide the headroom to support future 25G/100G camera aggregation switches without re-cabling—a tangible cost advantage in large campus or airport installations where conduit access is limited and labor is expensive.