StarTech CABLMANAGER2 1U Rack Cable Manager

Overview

The StarTech CABLMANAGER2 is a 1U rack-mount cable management panel designed to organize network, server, and KVM cabling inside standard 19-inch equipment racks. At 1.7 inches tall and 19.0 inches wide, it occupies a single rack unit and fits flush in any standard EIA-310 rack or enclosure — keeping patch cables, KVM drops, and power runs routed cleanly between active equipment without consuming additional space.

Keeping cables organized in a dense server rack is not cosmetic work. Unmanaged cabling blocks airflow, increases troubleshooting time during incidents, and creates physical strain on rear-panel ports. A dedicated manager like the CABLMANAGER2 provides defined pathways that stay in place between moves, adds, and changes.

Key Features

• 1U Form Factor (1.7 in H × 19.0 in W × 3.5 in D): Takes exactly one rack unit — no wasted space in high-density deployments where every U counts alongside switches, patch panels, and servers.
• 19-Inch Standard Width: Matches EIA-310 rack rail spacing directly, so it mounts without adapters in standard two-post and four-post open-frame or enclosed racks.
• Lightweight Construction (13.3 oz): Adds negligible load to the rack — relevant when a fully populated rack is already near its floor or rail weight limit.
• 2-Year Warranty: StarTech backs the CABLMANAGER2 with a 2-year manufacturer warranty, consistent with their hardware accessory line.

Integration and Compatibility

The CABLMANAGER2 is sized for standard 19-inch two-post and four-post racks. It is suited for use alongside network switches, patch panels, and KVM switches where cable runs between adjacent equipment need to be guided and retained. It is also applicable in NVR and video surveillance rack builds where camera feed cabling and network infrastructure share the same enclosure. Pair it with a rack power distribution unit for a fully organized bay.

Frequently Asked Questions

Q: What rack width does the CABLMANAGER2 fit?

A: The CABLMANAGER2 is 19.0 inches wide, matching standard EIA-310 rack rail spacing. It mounts directly in any standard 19-inch two-post or four-post rack without adapters.

Q: How much rack space does the CABLMANAGER2 occupy?

A: It occupies exactly 1U (1.7 inches of vertical rack space), leaving the remaining rack units free for active equipment.

Q: What is the warranty on the CABLMANAGER2?

A: The CABLMANAGER2 carries a 2-year manufacturer warranty.

Q: How deep is the CABLMANAGER2?

A: The product depth is 3.5 inches, making it compatible with shallow rack sections and standard mid-depth enclosures.

Q: How much does the CABLMANAGER2 weigh?

A: It weighs 13.3 oz (approximately 0.83 lbs), adding minimal load to the rack assembly.

Eden Phillips

The CABLMANAGER2 is a straightforward 1U panel, but at 3.5 inches deep and 19 inches wide it earns its rack unit in any build where cable density causes port strain or airflow restriction. I reach for this in rack deployments where KVM, patch, and power runs all converge in the same 12U to 24U bay — the kind of situation where an unmanaged bundle will eventually pull a connector loose during a late-night swap.

Technical Highlights:

• 1U Height (1.7 in): Consumes a single rack unit, which matters in colocation or edge deployments where space is invoiced per U.
• 19.0-Inch Width: Direct EIA-310 compatibility means no adapter brackets, no offset mounting — it installs in minutes alongside standard switching and patch gear.
• 13.3 oz Weight: At under one pound, it adds negligible load — relevant when a populated 42U rack is already approaching its rail or floor weight rating.

Deployment Considerations:

• At 3.5 inches of depth, verify your rack's usable depth before ordering if you're working with a shallow-depth wall-mount enclosure — some wall cabinets have limited rear clearance once doors and mounting rails are accounted for.
• Source evidence for the CABLMANAGER2 does not include detailed channel or finger configurations — confirm the specific cable routing style with the manufacturer spec sheet before specifying for high-density fiber or structured cabling runs where bend radius matters.

Best fit for mixed-use equipment racks in surveillance head-end closets, IT rooms, and edge telecom enclosures where network, KVM, and video recorder cabling share the same bay and need defined management between routine MACs.