CyberPower OR2200LCDRT2U Rack/Tower Line-Interactive UPS
The OR2200LCDRT2U is a 2200VA line-interactive UPS rated for 1320W continuous output — sized to handle dual-feed surveillance NVRs, PoE switches, and network infrastructure in mid-scale security deployments. Unlike passive surge strips, this unit switches to battery instantly when mains voltage dips or fails, keeping your recording infrastructure live long enough to gracefully shut down or failover to secondary systems.
Key Features
- 2200VA / 1320W capacity: Handles two 50-port PoE switches (each drawing 400–500W at full load) plus an 8-channel NVR simultaneously — real-world sizing for small-to-medium surveillance installations. Enough headroom that you're not running at 95% utilization on day one.
- 10ms transfer time on battery switchover: When grid voltage fails, the UPS inverts to battery within 10 milliseconds — fast enough that modern PoE switches and NVRs don't drop packet streams or reboot. No corrupted storage sectors from abrupt power loss.
- 5-minute runtime at full load; 13 minutes at half load: Gives you time to execute a controlled shutdown sequence or reach a backup power source. Not intended for hours-long mains outages — use this as a bridge to generator or a UPS stack for longer runtime.
- 8 × NEMA 5-20R outlets with individual surge protection (1840J): Eight separate 20-amp outlets mean you're not chaining daisy-chained power strips. Each outlet is protected against transients — the $300,000 Connected Equipment Guarantee covers supported gear against surge damage if the UPS fails to suppress.
- Automatic Voltage Regulation (AVR) without battery drain: When AC drops to 100V or rises to 140V (still within acceptable range but outside NVR spec), the UPS corrects voltage via transformer taps — no battery burn, no downtime, no fan noise. Critical for older or unstable feeds in remote warehouse or industrial sites.
- Rotatable LCD panel with real-time load display: Mount the unit in a cramped rack and still read battery status, load percentage, and estimated runtime from any angle. The display shows fault codes if something goes wrong — no guessing why the unit switched to battery.
- Simulated sine wave output: Cleaner than square-wave inverters and compatible with standard PoE injectors, NVRs, and network equipment. Some legacy or sensitive gear may complain about simulated sine, but modern commercial electronics handle it without issue.
- 2U rack or convertible tower mounting: Ships configured for 2U rack mounting but converts to tower (floor) mode with simple bracket repositioning — useful if your installation starts in a server closet and later migrates to a cabinet.
- Sealed lead-acid battery (4 × 12V/9Ah): Familiar, maintenance-free chemistry. Replacement batteries (RB1290X4L) are widely stocked. Recharges fully in 8 hours from a dead state — plan maintenance windows accordingly.
- USB and serial connectivity with optional SNMP card: PowerPanel Business management software (included) runs on Windows/Mac and monitors load, battery health, and power events in real time. Add the RMCARD205 for SNMP traps to your network monitoring suite — integrates with Nagios, Zabbix, or Splunk if you're already instrumenting your infrastructure.
Integration & Compatibility
Designed for small-to-mid-scale surveillance and network environments. Compatible with standard NEMA 5-20P wall outlets (shipped with 10-foot right-angle cord) and PoE switches that don't require more than 1320W sustained draw. PowerPanel Business software works with standard Windows/Mac endpoints — no exotic OS requirements.
If you're running Milestone XProtect, Axis Companion, or Hikvision iVMS, the UPS appears as a network device once you install the optional RMCARD205 SNMP module and configure trap receivers in your VMS or NOC monitoring system. No firmware updates or special drivers needed beyond the standard PowerPanel Business suite.
Operating Environment & Reliability
Operating temperature range 32–104°F (0–40°C) with humidity tolerance 0–95% non-condensing. Suitable for indoor rack closets, server rooms, and climate-controlled vaults. Not rated for unheated garages or outdoor cabinets — monitor ambient temperature if your installation sits near HVAC exhaust or in seasonal swing climates.
Meets UL1778 (UPS equipment), RoHS, and ENERGY STAR standards. Built on metal housing — industrial-grade finish, not plastic molding. Includes 3-year limited manufacturer warranty; extended warranty (WEXT5YR-U4B) available if you want 5-year coverage.
Specifications Summary
Input: 120 VAC ± 10% tolerance. Output: 120 VAC ± 10%. Capacity 2200 VA / 1320 W continuous. Dimensions 17.25" W × 3.5" H × 15.75" D. Weight 52.7 lb (dense lead-acid internals). Topology: Line interactive with AVR and 10ms transfer time.
When This UPS Makes Sense
Deploy the OR2200LCDRT2U in surveillance facilities where mains power is reasonably stable (not subject to frequent sags or brownouts). It excels at protecting against brief outages and voltage transients — typical power disruptions in commercial campuses, warehouses, and retail chains. If your site experiences chronic power instability or extended outages are a risk, pair this with a generator or step up to a larger three-phase UPS system.
Frequently Asked Questions
Q: What's the warranty on the OR2200LCDRT2U?
A: 3-year limited manufacturer warranty is included. You can extend to 5 years with the optional WEXT5YR-U4B extended warranty package. Coverage includes defects in the UPS unit and battery.
Q: How long will the OR2200LCDRT2U keep my NVR running if power fails?
A: Approximately 5 minutes at full 1320W load, or 13 minutes at half load (660W). This is enough time for a controlled shutdown or failover sequence, not intended for sustained outages. Pair with a backup generator or secondary UPS for longer runtime protection.
Q: Does the OR2200LCDRT2U support SNMP monitoring?
A: Yes, but only with the optional RMCARD205 SNMP card installed. The base unit ships with USB and serial connectivity for local PowerPanel Business monitoring. SNMP integration allows you to forward alerts to Nagios, Zabbix, Splunk, or your VMS monitoring system.
Q: Can I mount the OR2200LCDRT2U in a standard server rack?
A: Yes. It's designed as a 2U rack mount system. The unit ships configured for rack installation and can be converted to tower (floor) mode if needed later. Dimensions are 17.25" W × 3.5" H × 15.75" D.
Q: What happens if grid voltage drops but stays within spec?
A: The Automatic Voltage Regulation (AVR) feature corrects voltage via transformer taps without triggering battery operation. This preserves battery runtime for actual outages and eliminates nuisance transfers that can degrade battery lifespan.
Q: Is the battery user-replaceable?
A: Yes. The battery cartridge (4 × 12V/9Ah sealed lead-acid) is removable. Replacement model RB1290X4L is widely available. Recharge time from fully discharged is approximately 8 hours on line power.
The OR2200LCDRT2U sits in a practical sweet spot for mid-scale surveillance rollouts: enough capacity to protect a two-switch PoE infrastructure plus an 8-channel NVR, but sized conservatively so you're not paying for UPS capacity you'll never use. The 10ms transfer time and simulated sine-wave output are the details that matter — too many installers underestimate how fast a PoE switch needs to recover from power loss before it drops frames.
Technical Highlights:
- 1320W continuous output with 2200VA apparent capacity: Real-world math: two 48-port PoE switches pull roughly 400–500W each at full draw, an 8-channel NVR pulls 150–200W, and you have 300–400W left for monitoring equipment or future expansion. Not overpowering, not underpowered.
- 10ms battery transfer time on line loss: Modern PoE switches and network gear tolerate brief power interruptions if they're shorter than 20–30ms. The OR2200LCDRT2U gets in and out fast enough that your switch doesn't drop connected cameras or force a stack reload.
- Automatic Voltage Regulation without battery drain: If your facility has a shaky 115V feed (common in older industrial zones or rural locations), the AVR corrects via transformer taps — preserves battery for actual outages instead of burning it on voltage swings that never crossed the failure threshold.
- Sealed lead-acid chemistry with 8-hour recharge: No exotic battery replacement logistics. RB1290X4L cartridges are stocked at mainstream vendors. Maintenance window is 8 hours from dead, which fits a typical weekend commissioning schedule.
Deployment Considerations:
- 5-minute full-load runtime is a bridge, not a solution — assume you're paired with a generator or a secondary UPS stack if extended outages are a risk in your region. This unit buys you time to failover, not hours of uptime.
- The optional RMCARD205 SNMP card is not optional if you're deploying this in a NOC or automated infrastructure. USB-only monitoring works for a single closet installation, but two-way SNMP traps are necessary for enterprise-scale surveillance monitoring.
Deploy the OR2200LCDRT2U in commercial campuses, warehouse security vaults, or retail chains where mains power is generally stable and outages are brief. Skip it for chronically unstable grids — you'll just burn battery life on constant transfers and customer calls about false alarms.
