Panduit FWTYL7575KAM006 QuickNet OM5 12-Fiber Trunk Cable Assembly
The Panduit FWTYL7575KAM006 is a 6-meter OM5 wideband multimode fiber trunk assembly engineered for high-density data center spine-leaf architectures and 40/100G migration paths. This 12-fiber PanMPO-to-PanMPO trunk uses SigCore technology with Ultra insertion loss performance, HD Flex small-diameter construction for 30-40% pathway savings versus legacy trunk cables, and LSZH jacketing for enclosed-space compliance. The integrated pulling eye on one end supports long horizontal or vertical cable pulls through conduit or overhead pathways without custom pull grips. Method A polarity delivers plug-and-play direct connectivity between active equipment and fiber distribution panels in structured cabling deployments.
Key Features
- OM5 wideband multimode fiber supports 850-950nm wavelengths for short-wave division multiplexing (SWDM) and future 400G applications
- 12-fiber PanMPO female connectors at both ends for 40GBASE-SR4, 100GBASE-SR4, or parallel optics configurations
- Ultra insertion loss spec ensures <0.35 dB typical per connector for maximum link budget in 100m channel deployments
- HD Flex trunk construction reduces cable OD by 30-40% versus standard round trunk assemblies — critical for congested overhead ladder rack and high-density fiber enclosures
- Low Smoke Zero Halogen (LSZH) jacket meets IEC 60332-1 and IEC 60754 for international building codes and enclosed IT spaces
- Factory-terminated and tested PanMPO connectors eliminate field termination labor and performance variability
- Method A polarity (key-up to key-up) provides straight-through fiber mapping for direct connections without polarity management modules
- Pulling eye on one end simplifies installation through long horizontal or vertical pathways without damaging connectors
- Lime green cable jacket provides instant visual identification of OM5 infrastructure per TIA-598 color coding standards
- 50-micron core diameter optimized for VCSEL-based transceivers in 10/25/40/100G Ethernet and 16/32G Fibre Channel applications
OM5 wideband multimode fiber extends the usable wavelength range from OM4's single 850nm window to 850-950nm, unlocking short-wave division multiplexing (SWDM) for 4x capacity over the same fiber count. A single 12-fiber OM5 trunk supports three independent 40G links using SWDM optics, compared to requiring three separate 12-fiber OM4 trunks — a 3:1 consolidation advantage in congested pathways. The FWTYL7575KAM006's SigCore fiber technology maintains <0.35 dB typical insertion loss across the PanMPO connector interface, preserving link budget for 100-meter channel lengths at 100GBASE-SR4 (70m minimum) or extended-reach 40GBASE-SR4. Each of the 12 fibers is fusion-spliced to the PanMPO connector's MT ferrule in a controlled factory environment, eliminating the 0.5-1.0 dB field termination loss variability and physical contact uncertainty common with on-site epoxy-and-polish methods. The PanMPO's push-pull latch design prevents accidental disconnects during adjacent-port maintenance while allowing single-handed mating in dense patch panel environments where traditional MPO thumb-latch connectors require two-hand access.
In spine-leaf data center fabrics, this 6-meter length fits typical intra-row switch-to-switch connections or top-of-rack-to-end-of-row aggregation switch runs within standard 42U cabinet spacing. The HD Flex trunk construction uses an ultra-thin outer jacket over individually buffered fibers, reducing the overall cable diameter by 35% versus round 12-fiber assemblies — the difference between filling a 4-inch ladder rack pathway at 60% capacity (code maximum) or exceeding fill ratio and requiring a second parallel pathway. The integrated pulling eye on one end threads onto standard cable pullers for horizontal or vertical runs through conduit, cable tray, or raised-floor grommets; the eye supports up to 50 lbf pull tension without transferring load to the PanMPO connector bodies, which would induce endface damage or ferrule misalignment. LSZH jacketing eliminates PVC's chlorine emissions during fire exposure, meeting IEC 60332-1 flame propagation limits and IEC 60754-1 halogen-free requirements mandated by European EN 50173 premises cabling standards and increasingly adopted by North American hyperscale operators for above-ceiling pathway compliance. The lime green jacket color conforms to TIA-598-D Appendix F's OM5 identification standard, preventing accidental cross-connection with older OM3/OM4 infrastructure during phased migration projects where multiple fiber types coexist in the same distribution frames.
The FWTYL7575KAM006 ships with full compliance test reports per TIA-568-C.3 (optical fiber cabling), ISO/IEC 11801 (generic cabling for customer premises), and TIA-604-5 (FOCIS-5 MPO connector intermateability) — critical documentation for warranty claims on linked Cisco/Arista/Juniper switches where out-of-spec insertion loss voids optics support contracts. Method A polarity (straight-through pin 1-to-pin 1 mapping) supports direct connectivity in base-8 or base-12 architectures without requiring Type B flip modules or polarity-reversing patch cords at distribution panels. This assembly is factory-serialized with per-connector insertion loss measured across all 12 fiber positions and documented in the included test report, providing audit-trail traceability for projects requiring as-built documentation per BICSI DCDC or Uptime Institute Tier certification paths. For integrators deploying Panduit's QuickNet pre-terminated infrastructure alongside FiberRunner cable management and OPTICOM fiber enclosures, this trunk assembly maintains uniform connector keying and latching across the entire optical pathway, eliminating the mix-and-match compatibility issues and performance outliers common in multi-vendor fiber deployments.
