Middle Atlantic Narrow 77IN Gray W/12 5- - 7712ULBC20R

Middle Atlantic 7712ULBC20R CabinetMate Plug-In Outlet Center

Overview

The Middle Atlantic 7712ULBC20R is a 20-amp plug-in outlet center from the CabinetMate series, designed to deliver clean, organized power distribution inside AV, security, and IT enclosures. With a 6-foot (1.8m) power cord and TAA-compliant construction, the 7712ULBC20R is a practical fit for integrators who need reliable in-cabinet power without the overhead of a full rackmount PDU. Browse the Middle Atlantic power and rack infrastructure line for compatible enclosures, mounting hardware, and accessories.

The CabinetMate series addresses a common installation problem: running power inside shallow or narrow cabinets where a standard rackmount strip won't fit or isn't warranted. The plug-in form factor means you're not consuming rack unit space — an important consideration when every U counts in a densely loaded surveillance or access control enclosure. For integrators building out rack power distribution solutions, this unit slots neatly into the broader Middle Atlantic ecosystem.

Key Features

• 20-Amp Circuit Rating: At 20A, this outlet center handles heavier loads than the standard 15A strip — relevant when you're powering NVRs, managed switches, or multiple PoE injectors from a single circuit. A 20A circuit with a 20A-rated strip means you're not artificially throttling the available current at the distribution point.
• 6-Foot (1.8m) Power Cord: The 6ft cord gives you genuine flexibility in cabinet placement. You're not forced to position the cabinet directly adjacent to the wall outlet — useful in server rooms and equipment closets where the nearest 20A receptacle may be across the floor or at a non-standard height.
• TAA Compliant: TAA compliance means this unit is manufactured in a Trade Agreements Act-eligible country, making it eligible for U.S. federal, state, and municipal procurement contracts. If your project involves a government facility, correctional institution, or any GSA Schedule purchase, TAA compliance on every component in the rack — including the power strip — is a hard requirement, not a preference.
• Plug-In Design: Unlike hardwired or rackmount PDUs, the plug-in format requires no electrician for installation. You connect it to an existing 20A receptacle, which keeps installation straightforward and avoids the permitting overhead associated with hardwired equipment.
• CabinetMate Form Factor: The CabinetMate series is built to mount inside Middle Atlantic enclosures without consuming rack unit space. This matters in shallow-depth cabinets and wall-mount enclosures common in surveillance and access control installations, where a full 1U or 2U rackmount PDU is disproportionate to the load.
• Middle Atlantic Ecosystem Integration: Sourced within the Middle Atlantic infrastructure line, this outlet center is designed to pair with Middle Atlantic racks, enclosures, and cable management. Consistent sourcing across a rack build simplifies support and reduces compatibility questions at commissioning.

Integration & Compatibility

The 7712ULBC20R is designed for use within Middle Atlantic enclosures but will function in any installation with a compatible 20A outlet. It is well-suited to security system enclosures housing NVRs, access control panels, network switches, and similar equipment. For broader network rack enclosure builds, pair it with Middle Atlantic's rack shelves and cable management accessories to keep the installation clean and serviceable. Integrators sourcing TAA-compliant components for government contracts should verify that all powered devices in the enclosure also meet TAA requirements — the power strip alone satisfies the power distribution requirement, but the overall system compliance depends on every component. For guidance on power planning and load calculations, consult a rack power planning guide to ensure the 20A circuit is sized appropriately for the total connected load.

Frequently Asked Questions

Q: Is the Middle Atlantic 7712ULBC20R TAA compliant?

A: Yes. The 7712ULBC20R is TAA compliant, making it eligible for U.S. federal, state, and municipal procurement under GSA Schedule and similar contract vehicles.

Q: What is the amperage rating of the 7712ULBC20R?

A: The 7712ULBC20R is rated at 20 amps, which supports heavier in-cabinet loads compared to standard 15A outlet strips. Ensure the wall circuit feeding the unit is also rated at 20A.

Q: How long is the power cord on the 7712ULBC20R?

A: The cord is 6 feet (1.8 meters), providing flexible placement within or adjacent to the equipment cabinet without requiring the cabinet to be positioned directly at the wall outlet.

Q: Does the 7712ULBC20R require a licensed electrician to install?

A: No. The plug-in design connects to a standard 20A receptacle and does not require hardwiring or an electrician. However, confirm your facility's wall circuit is a 20A-rated outlet before connecting.

Q: What enclosures is the 7712ULBC20R designed to work with?

A: The 7712ULBC20R is part of the Middle Atlantic CabinetMate series, designed for installation inside Middle Atlantic enclosures. It is compatible with narrow and standard-depth cabinets where a full rackmount PDU would consume valuable rack unit space.

Q: Can the 7712ULBC20R be used in government or federal installations?

A: Yes. Its TAA compliance makes it suitable for government and federal installations subject to Trade Agreements Act procurement requirements. Verify that all other components in the enclosure also meet applicable compliance requirements for your specific contract.

Eden Phillips

The 7712ULBC20R is one of those components that doesn't get much attention until it's missing from the BOM — and then it becomes a site-visit problem. The 20A rating is the key spec here: most integrators default to 15A strips out of habit, but if your enclosure is running an NVR, a managed PoE switch, and a UPS on a single circuit, you want the distribution point rated to match the circuit, not constrain it.

Technical Highlights:

• 20A Rating: Matches standard 20A branch circuits common in server rooms and dedicated AV/security equipment closets — no artificial current bottleneck at the distribution strip.
• 6ft (1.8m) Cord: Long enough to reach a floor-mounted 20A outlet from a wall-mount enclosure at standard height, which eliminates the need for extension cords or repositioning the cabinet.
• TAA Compliance: A hard procurement gate on federal, state, and municipal projects — having this verified on the power strip avoids last-minute substitutions during government contract closeout.

Deployment Considerations:

• Confirm the wall receptacle is a 20A-rated outlet (NEMA 5-20R, the T-slot type) before specifying this unit — a standard 15A duplex outlet physically accepts the plug on some variants but is not rated for the load.
• The plug-in format means no rack unit consumption, but it also means no surge suppression or circuit breaker built in — if the installation requires surge protection, that needs to be handled upstream at the UPS or panel level.

The 7712ULBC20R is the right call for narrow-cabinet security and AV enclosures on government or institutional projects where TAA compliance is a contract requirement and rack unit space is at a premium.