Middle Atlantic Narrow 77IN Gray W/12 5- - 7712ULBC

Middle Atlantic 7712ULBC Plug-In Outlet Center

Overview

The Middle Atlantic 7712ULBC is a rack-mounted plug-in outlet center built for integrators who need a clean, compliant power distribution solution inside AV, security, and IT enclosures. With a 15-amp rating, a 6-foot (1.8 m) power cord, and confirmed TAA compliance, the 7712ULBC is a straightforward workhorse for government, enterprise, and commercial installations where both power capacity and procurement compliance matter. Explore the full Middle Atlantic rack power and enclosure line to pair this outlet center with compatible rackmount enclosures and accessories.

Key Features

• 15-Amp Power Capacity: A 15A circuit is the standard branch circuit rating across commercial buildings — matching this outlet center to a 15A breaker means you avoid nuisance trips under sustained load. For typical AV/security equipment draws (NVRs, managed switches, encoders), 15A is sufficient for a fully populated rack without requiring a dedicated 20A feed or special receptacles.
• 6-Foot (1.8 m) Power Cord: The 6 ft cord provides enough reach to connect to a floor-level PDU, a rack-mounted UPS, or a nearby wall outlet without needing an extension. In most standard 19-inch rack deployments — whether a wall-mount enclosure or a freestanding rack — 6 feet clears typical overhead or floor cable management runs without slack management issues.
• TAA Compliance: The 7712ULBC carries TAA (Trade Agreements Act) compliance, which is a procurement requirement for U.S. federal government contracts, state/local government projects using federal funding, and many enterprise purchasing agreements. If your project touches a government end-user — GSA Schedule, DoD, DHS, or similar — TAA compliance on every installed component is non-negotiable. This unit qualifies.
• Plug-In Design: The plug-in form factor means no hardwiring, no licensed electrician required for installation, and straightforward field replacement. Swapping a failed unit takes minutes — a meaningful advantage in remote or after-hours installations where downtime directly impacts security coverage or AV uptime.
• CabinetMate Form Factor: Designed to install inside Middle Atlantic enclosures, the CabinetMate outlet center integrates cleanly into the rack infrastructure without protruding cables or external power strips taped to the side. This keeps installations inspection-ready and consistent with structured cabling standards expected in enterprise AV and security deployments.
• Commercial-Grade Construction: Built to Middle Atlantic's rack infrastructure standards, this outlet center is intended for permanent installation in commercial enclosures — not the consumer power strips that occasionally show up in budget installations. The difference matters during facility inspections and when meeting integrator warranty obligations.

Integration and Compatibility

The 7712ULBC is designed for use within rack power distribution builds inside Middle Atlantic enclosures. The plug-in outlet center pairs naturally with Middle Atlantic rack enclosures, wall-mount cabinets, and freestanding racks. For installations requiring battery backup, pair with a compatible UPS or power supply upstream of this unit to provide ride-through during brief outages — particularly important in security camera and NVR deployments where even a momentary power loss can create recording gaps.

TAA compliance makes this unit compatible with procurement frameworks for U.S. government work. If you are specifying a full government-compliant rack build, cross-reference the NDAA-compliant security equipment category to ensure every component in the enclosure meets applicable compliance requirements.

For larger enclosures or higher-draw equipment, evaluate whether the 15A rating is sufficient for your total connected load — if a single rack will carry high-wattage servers, video walls, or multiple PoE injectors, a higher-amperage PDU may be warranted. The 7712ULBC is correctly scoped for moderate-density AV/security racks, not high-density compute builds.

Frequently Asked Questions

Q: Is the Middle Atlantic 7712ULBC TAA compliant?

A: Yes. The 7712ULBC is confirmed TAA (Trade Agreements Act) compliant, making it eligible for U.S. federal, state, and local government procurement contracts that require TAA-compliant components.

Q: What is the amperage rating of the 7712ULBC?

A: The 7712ULBC is rated at 15 amps, which matches the standard 15A commercial branch circuit. Ensure your facility circuit matches this rating to avoid tripped breakers under full load.

Q: How long is the power cord on the 7712ULBC?

A: The 7712ULBC includes a 6-foot (1.8 m) power cord, providing adequate reach for most standard rack enclosure installations without requiring an extension cord.

Q: Does the 7712ULBC require hardwiring or an electrician to install?

A: No. The 7712ULBC is a plug-in outlet center — it connects via its included 6 ft cord to an upstream receptacle or PDU. No hardwiring or licensed electrician is required for installation.

Q: Is the 7712ULBC compatible with all Middle Atlantic enclosures?

A: The 7712ULBC is a CabinetMate-series outlet center designed for use inside Middle Atlantic rack enclosures. Verify the specific enclosure dimensions and mounting rail configuration against Middle Atlantic's compatibility documentation for your enclosure model before ordering.

Q: Can the 7712ULBC be used in a government security installation?

A: Yes. TAA compliance makes the 7712ULBC a valid choice for government installations where TAA-compliant components are required by the procurement vehicle (GSA Schedule, DoD contracts, etc.).

Karl Wilson

When I spec rack power for a government security installation, TAA compliance is checked before anything else — and the Middle Atlantic 7712ULBC clears that gate on the first pass. The 15A rating and 6 ft cord are the two practical numbers that determine whether this unit fits your build without modification.

Technical Highlights:

• 15-Amp Rating: Matched to standard commercial 15A branch circuits — no special wiring, no 20A receptacle adapter gymnastics. For a moderate-density security rack (NVR, PoE switch, one or two encoders), 15A typically covers the load with headroom.
• 6 ft Cord: Long enough to reach a floor-level UPS or wall outlet from inside a standard 7-foot rack without a cord extender. Short enough that you won't be bundling excess slack in a tight wall-mount enclosure.
• TAA Compliance: This is not a checkbox feature — on GSA or DoD projects, a single non-TAA component can hold up procurement approval for the entire rack. The 7712ULBC is confirmed compliant, so it doesn't become the sticking point in your BOM review.

Deployment Considerations:

• Confirm the total connected load of all equipment in the enclosure stays under 15A (roughly 1,800W at 120V) — if you are loading a rack with high-wattage servers or multiple PoE injectors simultaneously, calculate actual draw before committing to this unit.
• The 7712ULBC is designed for Middle Atlantic CabinetMate integration — verify mechanical fit with your specific enclosure model before the installation truck rolls; outlet count and rail compatibility vary by enclosure configuration.

This unit is the right call for a government physical security rack — access control panels, NVRs, managed PoE switches — where TAA compliance is required and the load profile is moderate. It is not the unit for a high-density compute enclosure where 20A or multi-circuit PDUs are warranted.