Middle Atlantic 7712BCS CabinetMATE Plug-In Outlet Center

Overview

The Middle Atlantic 7712BCS is a plug-in outlet center designed for rack and cabinet power distribution in commercial AV, security, and IT enclosures. Part of Middle Atlantic's Middle Atlantic power distribution line, the 7712BCS delivers straightforward 15-amp unswitched power in a format that integrates cleanly into standard rack enclosures — no dedicated PDU shelf required. For integrators building out rack power distribution in surveillance or AV head-end cabinets, this unit fills the gap between a simple power strip and a full managed PDU when you need reliable, compliant power without the overhead of remote switching or monitoring.

Key Features

• 15-Amp Circuit Capacity: At 15A, the 7712BCS supports a full load of lower-draw rack equipment — think NVRs, managed switches, small UPS bypass loads, and access control panels — without tripping a standard 15A branch circuit. Size your connected load to 80% (12A continuous) per NEC best practice.
• 6 ft (1.8 m) Power Cord: The 6-foot cord provides enough reach to connect to a floor-level or mid-cabinet PDU or wall outlet without extension cables. In a standard 7-foot security rack enclosure, 6 ft typically gets you to the bottom PDU rail or a nearby outlet strip without cable management issues.
• TAA Compliance: The 7712BCS is TAA (Trade Agreements Act) compliant, which matters on government, federal, and many state/local agency projects where procurement rules require TAA-compliant sourcing. If your bid spec calls out TAA, this unit qualifies — no waiver needed.
• CabinetMATE Plug-In Design: The plug-in form factor means installation is tool-light: mount the bracket in the cabinet, plug in the unit, and it's done. No hardwiring, no electrician sign-off on the outlet strip itself — appropriate for integrators commissioning cabinets in the field.
• Rack Cabinet Integration: Designed as part of Middle Atlantic's cabinet ecosystem, the 7712BCS mounts inside Middle Atlantic enclosures using the CabinetMATE mounting system, keeping cords managed and the unit secured rather than sitting loose on a shelf.

Integration & Compatibility

The 7712BCS is built for Middle Atlantic rack and wall-mount cabinet environments where the CabinetMATE mounting system is in use. It is not a standalone rack-mount PDU with standard EIA-310 rack ears — verify your cabinet model supports the CabinetMATE plug-in slot before ordering. For network and security rack builds using third-party enclosures, confirm physical mounting compatibility with your cabinet vendor. The 15A, standard NEMA 5-15P plug connects to any standard 15A North American receptacle or PDU outlet. TAA compliance supports use on GSA schedule projects and government facility installs where country-of-origin documentation is required.

Frequently Asked Questions

Q: Is the Middle Atlantic 7712BCS TAA compliant?

A: Yes. The 7712BCS is TAA (Trade Agreements Act) compliant, making it suitable for government and federal procurement where TAA compliance is a bid requirement.

Q: What is the cord length on the 7712BCS?

A: The 7712BCS ships with a 6 ft (1.8 m) power cord — sufficient reach for most standard rack and cabinet installations without requiring an extension.

Q: What is the amperage rating of the 7712BCS?

A: The 7712BCS is rated at 15 amps. For continuous loads, derate to 80% per NEC guidelines, giving you a practical 12A continuous capacity.

Q: Does the 7712BCS require a special cabinet or enclosure to install?

A: The 7712BCS uses Middle Atlantic's CabinetMATE plug-in mounting system. It is designed for compatible Middle Atlantic enclosures — verify your specific cabinet model supports CabinetMATE mounting before ordering.

Q: Can the 7712BCS be used on government or public agency projects?

A: Yes. TAA compliance means the 7712BCS meets the sourcing requirements for most government and public sector procurements. Always confirm the specific project's compliance requirements with your contracting officer.

James Everett

The 7712BCS comes up most often on government and municipal security projects where TAA compliance isn't optional — it's a line item in the bid spec. The 15A rating is the right fit for typical head-end cabinet loads (NVR, switch, access control panel, maybe a small UPS), and the 6 ft cord clears most standard cabinet depths without hunting for an extension.

Technical Highlights:

• 15-Amp Rating: Covers standard branch circuit capacity; keep connected loads under 12A continuous (80% NEC rule) to avoid nuisance trips on shared circuits.
• 6 ft Cord: At 1.8 m, the cord reaches a bottom-mounted outlet strip or PDU in virtually any full-height rack without cord management gymnastics.
• TAA Compliance: Documented TAA status means procurement on GSA schedule and most state/local government contracts clears without sourcing exceptions or substitution requests.

Deployment Considerations:

• The CabinetMATE plug-in system is enclosure-specific — confirm your Middle Atlantic cabinet model has the CabinetMATE receptacle before spec'ing this unit into a mixed-brand rack build.
• With only three confirmed specs in evidence (amps, cord length, TAA status), verify outlet count, surge protection, and any filtering specs directly with the manufacturer datasheet before finalizing the design for noise-sensitive equipment.

Best fit: government or municipal security head-end cabinets inside Middle Atlantic enclosures where TAA compliance is a hard procurement requirement and the load profile stays within a single 15A circuit.